10.19
Voltammogramme: Übersicht
Voltammogramme sind Strom-Diagramme als Funktion des angelegten Potentials, die Einblicke in elektrochemische Systeme bieten. Die Form eines Voltammog…
Ein Voltammogramm ist ein experimentell erzeugtes Diagramm, das den Strom auf der y-Achse und das angelegte Potential auf der x-Achse darstellt.
Ihre Form hängt von der Methode zur Messung des Stroms und des Vorhandenseins oder Nichtvorhandenseins von Konvektion ab, d. h. der Wärmeübertragung durch die makroskopische Bewegung eines Fluids.
In Gegenwart von Konvektion zeigt das Diagramm ein sigmoides Wachstum vom Rest- bis zum Grenzstrom bei einem Potential, das dem Oxidations- oder Reduktionspotential des Analyten entspricht.
Hier deutet der Grenzstrom auf einen konstanten Wert für die Diffusionsschichtdicke hin, der durch Rühren der Lösung erreicht wird, wie er in der hydrodynamischen Voltammetrie beobachtet wird.
Ohne Konvektion nimmt die Dicke der Diffusionsschicht mit der Zeit zu, was zu einem Spitzenstrom führt.
Wenn die Stromänderung gegen das Potential überwacht wird, charakterisiert der Spitzenstrom das Diagramm.
Der Grenzstrom kann zur Abschätzung der Analytkonzentration in der Bulk-Lösung verwendet werden, da er direkt proportional zur Analytkonzentration ist.
Darüber hinaus können aus Voltammogrammen ermittelte Peakpotentiale zur Bestimmung der Standardzustandspotentiale von Redoxreaktionen unter Verwendung der Nernst-Gleichung herangezogen werden.
View the full transcript and gain access to JoVE Core videos
Q1: What is a voltammogram and what does it measure?
A voltammogram is a graph plotting current on the y-axis against applied potential on the x-axis, generated experimentally to analyze electrochemical systems. It provides insights into the behavior of analytes during redox processes by measuring how current changes as the applied potential varies. The shape and characteristics of a voltammogram reveal information about mass transport, reaction kinetics, and the electrochemical properties of the system being studied.
Q2: How does convection affect the shape of a voltammogram?
Convection, the heat transfer by macroscopic fluid movement, significantly influences voltammogram shape. With convection present, such as in hydrodynamic voltammetry with stirring, the diffusion layer thickness remains constant, producing a sigmoid-shaped plot that rises from residual to limiting current. Without convection, the diffusion layer grows over time, creating a peak-shaped voltammogram where current reaches a maximum before declining.
Q3: What is the limiting current and how is it used analytically?
The limiting current is the constant current value achieved in hydrodynamic voltammetry when the diffusion layer thickness stabilizes due to stirring. It is directly proportional to analyte concentration in the bulk solution, making it valuable for quantitative analysis. By measuring the limiting current, chemists can accurately determine analyte concentrations in environmental analysis, pharmaceuticals, and industrial monitoring applications.
Q4: How can voltammograms determine standard state potentials of redox reactions?
Peak potentials from voltammograms can be applied with the Nernst equation to determine standard state potentials of redox reactions. This qualitative application provides insight into whether a substance is likely to be oxidized or reduced under standard conditions. Voltammetry also helps differentiate between reversible reactions, which show symmetric peaks, and irreversible processes displaying asymmetry.
Q5: What causes the peak current in voltammograms without convection?
Without convection, the diffusion layer thickness increases over time as analyte is consumed at the electrode surface. Peak current occurs when the analyte reduction or oxidation rate reaches maximum before decreasing due to the expanding diffusion layer. This peak characterizes the voltammogram shape and reflects the changing mass transport conditions as the experiment progresses.
Q6: How does the diffusion layer thickness differ between convective and non-convective conditions?
In convective conditions like hydrodynamic voltammetry, stirring maintains a constant diffusion layer thickness, which controls mass transfer to the electrode and produces a sigmoid voltammogram. Without convection, the diffusion layer grows progressively over time, leading to changing mass transport and the characteristic peak shape. This difference in diffusion layer behavior fundamentally determines the voltammogram's appearance and analytical characteristics.
Q7: What qualitative information can voltammograms provide about electrochemical reactions?
Voltammograms provide qualitative data by revealing the nature of electrochemical reactions through their shape and symmetry. Reversible reactions display symmetric peaks, while irreversible processes show asymmetry. Additionally, voltammetric techniques like voltammetric techniques cyclic voltammetry allow chemists to assess reaction reversibility and distinguish between different types of electrochemical processes occurring in solution.