10.21
Voltammetrische Techniken: Pulsvoltammetrie
Die Differentialpulsvoltammetrie (DPV) ist eine Art von Voltammetrie, bei der eine Reihe von Spannungspulsen an eine elektrochemische Zelle angelegt u…
Die Grenzen der Linear-Scan-Voltammetrie werden durch Pulsmethoden wie die Differenzimpuls- und Rechteckvoltammetrie überwunden, die den faradaischen Strom frei von störendem Ladestrom messen.
Bei der Differentialpuls-Voltammetrie wird eine Abfolge von Potentialimpulsen verwendet, die auf einer linearen Potentialrampe überlagert sind. Bei jedem Schritt wird ein Impuls mit höherem Potential für eine kurze Dauer angelegt, und der Strom wird kurz vor und am Ende des Impulses gemessen.
Die Stromdifferenz wird gegen das angelegte Potential aufgetragen, um ein Voltammogramm zu erzeugen. Das Maximum dieses Stroms ist proportional zur Konzentration des Analyten in der Lösung.
Die Rechteckwellen-Voltammetrie verwendet eine Wellenform, die eine Rechteckwelle und eine Treppe kombiniert. Bei diesem Verfahren wird der Analyt während kathodischer Pulse an der Elektrodenoberfläche reduziert und während anodischer Pulse reoxidiert.
Das Rechteck-Polarogramm misst die Stromdifferenz zwischen zwei Punkten.
Da die beiden Ströme gegensätzliche Vorzeichen haben, ist der resultierende Strom, der aus ihrer Differenz geschätzt wird, größer und direkt proportional zur Konzentration des Analyten.
View the full transcript and gain access to JoVE Core videos
Q1: How does differential-pulse voltammetry overcome limitations of linear-scan voltammetry?
Differential-pulse voltammetry (DPV) applies small potential pulses superimposed on a linear potential ramp, measuring current before and after each pulse. The current difference is plotted against applied potential, eliminating interfering charging current that obscures signals in voltammetric techniques linear-scan methods. This approach provides excellent resolution and enables accurate analyte concentration determination.
Q2: What is the relationship between differential current and analyte concentration in DPV?
In differential-pulse voltammetry, the magnitude of the differential current—the difference between current measurements before and after each potential pulse—is directly proportional to the concentration of the electroactive species in solution. This linear relationship allows quantitative determination of analyte concentration from the voltammogram peak height.
Q3: How does square-wave voltammetry measure analyte concentration?
Square-wave voltammetry combines a square wave and staircase potential, reducing the analyte during cathodic pulses and reoxidizing it during anodic pulses. The polarogram plots the current difference between anodic and cathodic peaks. Since these opposing currents have different signs, their difference produces a larger net current directly proportional to analyte concentration.
Q4: Why does square-wave voltammetry produce larger signals than other pulse methods?
Square-wave voltammetry generates larger signals because it measures the difference between anodic and cathodic currents with opposing signs. This difference amplifies the net faradaic current compared to linear methods, which measure only one current direction. The enhanced signal improves sensitivity and reduces interference from capacitive background currents.
Q5: What advantage does DPV offer regarding capacitive currents in electrochemical measurements?
Differential-pulse voltammetry demonstrates relative inertness to capacitive currents, which typically interfere with signal detection in other voltammetry techniques. By measuring the differential current between two points and applying potential pulses at specific intervals, DPV effectively suppresses the charging current contribution, allowing faradaic current from redox reactions to dominate the measurement.
Q6: How do potential pulses in DPV generate faradaic current?
When a potential pulse is applied to an electrochemical cell in differential-pulse voltammetry, it drives redox reactions at the electrode surface. Electrons transfer between the electrode and analyte species in solution, generating faradaic current. Measuring current before and after each pulse isolates this faradaic component from background charging current.
Q7: What makes DPV effective for distinguishing multiple electroactive species in solution?
Differential-pulse voltammetry offers excellent resolution, allowing separation of voltammetric signals from multiple species present simultaneously in solution. The technique's ability to suppress capacitive currents and measure differential faradaic current at each potential step produces sharp, well-defined peaks for each electroactive species, enabling accurate identification and quantification.