Frequenzgang

Active filters consist of operational amplifiers, resistors, and capacitors combined to remove unwanted frequency components from signals. Unlike passive filters that use inductors, active filters leverage op-amps to achieve gain control and precise frequency response shaping. These circuits are widely employed in audio processing, telecommunications, and power supply units for flexible signal conditioning.

Low-pass active filters pass signals below the corner frequency and attenuate those above it, with gain determined by the feedback-to-input resistor ratio. High-pass active filters do the opposite, allowing frequencies above the corner frequency while suppressing those below. Both filter types use operational amplifiers to achieve independent gain control separate from cutoff frequency selection.

The feedback-to-input resistor ratio directly determines the passband gain in active filters, independent of the cutoff frequency. This design feature allows engineers to set gain and frequency response separately, providing flexibility unavailable in passive filters. By adjusting resistor values, designers can achieve specific gain requirements while maintaining desired corner frequencies.

Band-pass filters combine low-pass and high-pass filter properties to transmit only frequencies between two corner frequencies while rejecting those outside this range. Band-reject filters, also called notch filters, do the opposite by blocking frequencies within a specific range and allowing external frequencies to pass. Both use summing amplifiers to merge filter stages for precise frequency selectivity.

Active filters are categorized as first-order low-pass, first-order high-pass, band-pass, and band-reject filters. Each category serves distinct applications: low-pass filters smooth signals, high-pass filters remove DC components, band-pass filters isolate specific frequency ranges, and band-reject filters eliminate interference at particular frequencies. This classification helps engineers select appropriate filters for their signal processing needs.

Active filters offer significant advantages over passive filters, including independent gain control that doesn't depend on cutoff frequency, elimination of expensive inductors, and improved attenuation efficacy across frequency ranges. The use of operational amplifiers enables precise frequency response shaping and flexible design parameters. These benefits make active filters ideal for audio processing, telecommunications, and power supply applications.

Design parameters such as resistor and capacitor values are selected to set the cutoff frequencies and shape the overall frequency response to meet specific requirements. The corner frequency depends on the RC time constant, while the feedback resistor ratio controls gain. Engineers use transfer function analysis to determine component values that achieve desired passband gain and frequency selectivity.