Bewegungsfugen in Gebäuden

Building movements occur from moisture exposure causing expansion, foundation heaving when soil water freezes, and thermal fluctuations. These movements can form cracks unless accommodated by movement joints. Temperature changes, moisture content variations, and structural deflections are primary drivers of these inevitable motions that must be managed during design and construction.

Working joints in shingled roofs use small strips assembled in an overlapping pattern that tolerate slight movements without distress. This simple joint type is integrated during construction and allows thermal and moisture movements to occur freely. Similar applications include wood bevel siding, which accommodates material movement through overlapping design.

Structure enclosure joints separate structural from nonstructural elements to prevent load transfer that could cause damage. In cavity walls, soft joints are placed under shelf angles supporting the non-structural exterior wythe. This design prevents deflection and stress concentration, protecting both structural and nonstructural components from harmful interactions.

Isolation joints enable independent movement between new and existing materials without interference, commonly used during renovations. Control joints create predetermined lines of weakness where cracks occur in a controlled manner, seen in concrete sidewalks and plaster walls. Both manage material movement but serve different purposes: isolation prevents interaction, while control directs cracking.

Expansion joints are open slots designed to allow building materials to expand and contract freely. They accommodate material movement evident in brick walls and curtain wall systems, preventing stress buildup. These joints work alongside expansion and contraction in masonry walls to manage dimensional changes caused by temperature and moisture variations.

Building separation joints divide complex building structures into discrete segments that move independently of each other. These joints are categorized into volume-change joints, settlement joints, and seismic separation joints, each addressing specific structural movement challenges. This subdivision prevents one section's movement from damaging adjacent sections.

Movement joints prevent unsightly or dangerous damage caused by inevitable building motions. Without proper joints, thermal expansion, moisture absorption, and foundation heaving create cracks and structural stress. Movement joints accommodate these stresses by allowing materials to move freely, maintaining building integrity and safety throughout its lifespan.