Beton mischen

The primary goal of mixing concrete is to stir its ingredients, ensuring aggregates are evenly coated with cement paste, resulting in a uniform mixture. This uniform distribution is essential for achieving consistent concrete quality and performance across the entire batch.

Batch mixers process one complete batch at a time, mixing ingredients and discharging them before the next batch begins. Continuous mixers automatically receive ingredients in a steady flow, uniformly combining them with constant outflow. Batch mixers offer flexibility, while continuous mixers provide consistent production rates.

Tilting drum mixers use internal blades to mix concrete and discharge the mixture by tilting the drum. Non-tilting drum mixers discharge through a chute or by reversing the drum's rotation. Both are batch mixer types but employ different discharge mechanisms to empty their contents.

Pan-type mixers use rotating paddles about a vertical axis to blend concrete in batches. Dual drum mixers employ a two-stage mixing process within tandem drums, allowing sequential mixing. Both are batch mixer options that provide alternative mixing mechanisms for different production needs.

Mixing a volume that is only a minor portion of the mixer's total capacity is inefficient and leads to inconsistent mixes. Similarly, overloading the mixer beyond its recommended capacity by more than 10% results in non-uniform mix. Operating within the mixer's optimal capacity range ensures proper ingredient distribution and concrete quality.

To ensure mixer efficiency in yielding uniform mix, samples are collected at specific discharge points and evaluated for consistency according to set criteria such as density, air content, slump, and compressive strength. This sampling process confirms that the mixer is properly combining all ingredients throughout production.

Four main types of batch mixers are used: tilting drum mixers, non-tilting drum mixers, pan-type mixers, and dual drum mixers. Each type uses different mechanisms for mixing and discharging concrete. After mixing is complete, concrete is typically ready for placing concrete or other downstream processes.