Faktoren, die das Kriechen beeinflussen

Lower water-to-cement ratios increase concrete strength, which directly reduces creep. Stronger concrete at the time of loading exhibits less creep because the material is more resistant to stress-induced deformation. This relationship is fundamental to controlling creep through concrete mix design and material selection.

Aggregates restrain creep because they are stiffer than hardened cement paste. Their modulus of elasticity determines their stiffness, and greater aggregate volume in the concrete reduces overall creep. The cement paste, not the aggregates, is the primary contributor to creep deformation in normal-weight aggregate concrete.

Within design limits, creep increases linearly with applied stress. However, when stress exceeds design limits, creep increases non-linearly and accelerates due to microcracking in the concrete material. This distinction is critical for predicting creep behavior under different loading conditions and stress ranges.

Creep decreases as the age of load application increases because concrete gains strength over time. Applying loads at later stages diminishes creep significantly. Additionally, curing at elevated temperatures before loading enhances strength and further reduces creep development in structural members.

Higher relative humidity reduces creep in concrete. Admixtures that increase fine pore volume holding moisture lead to increased creep. The concrete member's size, expressed as volume-to-surface ratio, also affects creep; larger members exhibit less creep at constant relative humidity conditions.

Early-loaded members with high-early-strength cement exhibit less creep than those with ordinary Portland cement. High-early-strength cement allows concrete to gain strength faster before loading, reducing subsequent creep significantly. Cement type selection is therefore important for controlling creep in structural applications and design.

Concrete strength is inversely related to creep; stronger concrete exhibits significantly less creep. Strength can be enhanced through lower water-to-cement ratios, elevated temperature curing, and delayed loading. All these factors work together to minimize stress-induced deformation and creep in concrete members.