Häufige Fehler und Irrtümer beim Nivellieren

Misreadings occur when the line of sight of the telescope is partially obstructed by obstacles like tall grass, causing the crosshair to misalign with the rod graduation. Instead of reading the correct value, surveyors may record an incorrect measurement. Calling out and verifying rod readings using a target prevents recording wrong values in field notes.

The rod must be held vertically to ensure accurate measurements. When the rod leans due to uneven ground, the smallest rod reading, which indicates verticality, is not identified. This tilting increases the measured height and distorts elevation differences between survey points.

Equal backsight and foresight distances minimize errors caused by earth curvature and atmospheric refraction. When distances are unequal—for example, backsight at 5.0 m and foresight at 25.0 m—the imbalance increases inaccuracy in elevation calculations. Balancing these distances reduces systematic errors in survey measurements.

After relocating the level, surveyors may take a reading to the level rod positioned at the wrong turning point. This incorrect turning point handling leads to foresight readings at a different elevation than intended, causing miscalculation of the elevation difference between survey points.

The rod base must be clean of mud and held on firm ground. When extending the rod, ensure the upper part is properly secured to prevent collapse during reading. Retract the rod carefully after taking measurements to maintain structural integrity and measurement accuracy.

Center the bubble on the level properly, focus the telescope correctly, and verify the telescope's line of sight is parallel to the level tube. Confirm the horizontal crosshair is perpendicular to the vertical axis of the level. These adjustments ensure the line of sight remains horizontal and measurements are accurate.

Strong winds shake the leveling instrument, making it difficult to maintain a steady line of sight. Heat waves from the sun distort the telescope's view, particularly over long-sight distances, leading to fluctuations in rod readings. Securing the instrument against wind and limiting sight lengths during extreme weather reduces environmental errors.