Name: elements, compounds, and bonding
Uploaded: 2026-06-01T06:27:58.944Z
Duration: 1 min 27 s
Channel: JoVE

K12 Standards

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

High School

Chemistry

Matter and Its Interactions

C-PS1-1

Elements and Compounds

In nature, pure substances are classified as either elements that cannot be broken down into simpler substances or compounds made up of two or more elements combined in fixed ratios.Depending on the type of atom, elements exist either as single atoms or as molecular elements, while compounds can be either molecular or ionic.Single atoms are the simplest units of atomic elements, such as helium, neon, and krypton.Molecular elements, on the other hand, contain two or more identical atoms bonded together, forming a molecule as the base unit, like hydrogen or sulfur.Molecular compounds form when atoms of two or more nonmetallic elements combine by sharing valence electrons through covalent bonds.For example, water forms through the covalent bonding of one oxygen atom and two hydrogen atoms.Ionic compounds form when ions of metallic elements combine with ions of one or more nonmetallic elements through electrostatic forces.For example, in table salt, sodium metal atoms lose their valence electrons and form positively charged cations, while chloride nonmetal atoms gain electrons and form negatively charged anions.

יסודות ותרכובות

Pure substances consist of only one type of matter. A pure substance can be an element or a compound. An element consists of only one type of atom, while ...

https://cloudfront.jove.com/files/ftp_upload/10659/10659_article_thumb_10659.jpg

Education

JoVE Core

Biology

ביולוגיה

Fundamentals

יסודות

Chemistry of Life

כימיה של החיים

KEY TERMS AND CONCEPTS

מונחים ומושגים מרכזיים

Learn by watching this video about Molecules and Compounds : O2 and H2O at JoVE.com

elements, compounds, and bonding

Elements and compounds are the two main kinds of pure substances. A pure substance contains only one kind of matter. An element contains only one type of atom. A compound contains two or more types of atoms joined by a chemical bond.

Elements can be atomic or molecular, depending on their basic units. They are unique forms of matter with specific chemical and physical properties. Ordinary chemical reactions cannot break an element into a smaller substance. There are 118 elements, but only 98 occur naturally. The rest are unstable and must be made by scientists in laboratories.

The four elements found in all living organisms are oxygen, carbon, hydrogen, and nitrogen. Outside living things, elements are not distributed evenly. The atmosphere is rich in nitrogen and oxygen but has little carbon and hydrogen. The earth's crust has little nitrogen and carbon, but it does contain oxygen and a small amount of hydrogen. Even with these differences in abundance, the same chemical and physical laws apply to elements in both living and nonliving systems.

Compounds are pure substances made of two or more elements in fixed proportions. They are classified as molecular, also called covalent, or ionic, based on the bonds in them. Molecular compounds form when two or more different nonmetal atoms share electrons. Their basic units are neutral molecules. Methanol is an example. Its CH3OH molecules contain one carbon atom, one oxygen atom, and four hydrogen atoms joined by covalent bonds.

Ionic compounds contain ions and are held together by ionic bonds. These compounds often form when a metal reacts with a nonmetal. The metal usually loses electrons, and the nonmetal usually gains them. This transfer creates ions with opposite charges. Sodium chloride is an example. In NaCl, sodium becomes Na+ and chlorine becomes Cl−, and the compound forms in a 1:1 ratio of sodium ions to chloride ions.

Elements, Compounds, and Bonding

the periodic table and organismal elements

the-periodic-table-and-organismal-elements

Periodic Table Basics for Living Things

The periodic table helps explain which elements living things need and how those elements are related. Elements are the smallest units of matter that cannot be broken down further by chemical processes. There are 118 known elements, but not all occur naturally, and even fewer are essential for life. Living matter is made mostly of carbon, nitrogen, hydrogen, and oxygen. Together, these elements make up most of the human body and are also found in all life on Earth. Smaller amounts of calcium,...

atomic structure

Atoms and Their Subatomic Particles

Atoms are the smallest units of elements, and they make up all matter. Each atom contains three subatomic particles: protons, neutrons, and electrons. These particles give an atom its mass and its charge. The idea that matter is made of tiny particles goes back to Democritus, a Greek philosopher around 450 B.C. He used the word atomos, which means “indivisible.” The idea was not accepted at the time, but it returned many centuries later. In the 19th century, John Dalton proposed an atomic...

isotopes

Atomic Mass and Isotope Basics

Atomic mass and isotopes are linked by the number of protons and neutrons in an atom. The number of protons sets an element’s atomic number, or Z. For example, every atom with eight protons is oxygen. Atoms of the same element can still differ because they can have different numbers of neutrons. The mass number, or A, is the total of protons and neutrons. Atoms with the same atomic number but different mass numbers are called isotopes. Elements can have several isotopes. Carbon-12, carbon-13,...

electron behavior

Electron Shells and Valence Electrons

Electrons are negatively charged subatomic particles that occupy regions around the positively charged nucleus of an atom. Their location is linked to energy levels called shells. They are also grouped into sub-shells and orbitals within each shell. An electron’s shell shows its general energy level. Electrons closer to the nucleus have less energy, while electrons farther away have more energy. The sub-shell gives a more exact location and energy level. An orbital is the shape of the region...

electron orbital model

Electron Orbitals and Energy Levels

Electron orbitals show where electrons are most likely to be found around the atomic nucleus. They also help explain energy levels, orbital shapes, and three-dimensional orientation. In an atom, electron location is described first by a shell, or principal energy level. It is then described by a subshell within that shell and by the individual orbitals inside each subshell. The first shell is closest to the nucleus. It has only one subshell and one spherical orbital, called the 1s orbital.

covalent bonds

Electronegativity and Covalent Bond Polarity

Covalent bonds form when two atoms share electrons to fill their valence shells. The way those shared electrons are pulled depends on electronegativity, which is an atom’s ability to attract electrons in a bond. When atoms have similar electronegativities, they form nonpolar covalent bonds. When their electronegativities differ, the bond is polar because the electrons are shared unevenly. The number of covalent bonds an atom can make depends on its valence electrons. Oxygen has six valence...

ionic bonds

Ionic Compounds and Electrolytes

Ionic compounds form when atoms gain or lose electrons to reach a more stable electron configuration. The charged particles that result are called ions. Ionic bonds are electrostatic attractions between oppositely charged ions. The most reactive elements include those with one valence electron, such as potassium, and those that need one more valence electron, such as chlorine. Ions that lose electrons become positive cations. Ions that gain electrons become negative anions. Cations and anions...

hydrogen bonds

Hydrogen Bonds in Water

Hydrogen bonds in water are weak attractions between atoms that are already part of other chemical bonds. One atom is electronegative, such as oxygen, and carries a partial negative charge. The other is a hydrogen atom that is bonded to another electronegative atom and has a partial positive charge. These attractions form because hydrogen has very weak electronegativity when it binds with a strongly electronegative atom like oxygen or nitrogen. The electrons in that bond are shared unequally.

van der waals interactions

Intermolecular Forces in Polar Solutions

Intermolecular forces are the attractions and repulsions that act between atoms and molecules. These electrostatic forces come from particles with permanent, partial, or temporary charges. For neutral atoms and molecules, the main types are ion-dipole, dipole-dipole, and dispersion forces, which are together called van der Waals forces. Polar molecules have a partial positive end and a partial negative end. That separation of charge creates a dipole. In water, oxygen is more electronegative...

elements and compounds

Elements and compounds are the two main kinds of pure substances. A pure substance contains only one kind of matter. An element contains only one type of atom. A compound contains two or more types of atoms joined by a chemical bond. Elements can be atomic or molecular, depending on their basic units. They are unique forms of matter with specific chemical and physical properties. Ordinary chemical reactions cannot break an element into a smaller substance. There are 118 elements, but only 98...

molecular shapes

Electron Geometry and Lone Pairs

Electron geometry and lone pairs help explain why molecules take specific shapes. The arrangement of electron groups around a central atom controls the molecular geometry. Valence electrons form bonding pairs, which sit mainly between bonded atoms, or lone pairs, which belong to one atom only. Electron pairs in the valence shell spread out to reduce repulsion. They do this by maximizing the distance between one another. A diatomic molecule has two regions of electron density, and these are...

pH Scale in Everyday Solutions

pH measures how acidic or basic a water-based solution is. It depends on the concentration of hydronium ions, H3O+, in the solution. In one liter of pure water at neutral pH, there are 1×10−7 moles of hydronium ions. Because hydronium ion levels can vary over a very wide range, measuring pH directly in moles is not practical. The pH scale converts hydronium ion concentration into a negative logarithm. Pure water has a pH of 7 and is neutral. Most solutions fall between 0 and 14, but some, such...

chemical reactions

Atoms, Bonds, and Chemical Reactions

Chemical reactions rearrange atoms to form new substances. In a reaction, the starting materials are called reactants, and the new substances are called products. The atoms stay the same type and number, but their bonds change, so the substances become different compounds. During a chemical reaction, bonds between atoms break and form again. This means the shared electrons are rearranged. Some reactions happen on their own, while others need an energy source such as heat or light. In biology,...

redox reactions

Electron Transfer in Redox

Redox reactions are chemical reactions that involve electron transfer between atoms or molecules. When one particle gains electrons, another must lose them at the same time. That is why oxidation and reduction always happen together. The two roles in a redox reaction are linked. The atom that is oxidized acts as the reducing agent, or reductant. The atom that is reduced acts as the oxidizing agent, or oxidant. A simple way to remember the ideas is OIL-RIG, which means oxidation is losing...

cohesion

Water Molecules and Surface Tension

Water molecules stick to each other through cohesion. Water is neutral overall, but it is a polar molecule. The oxygen atom in one water molecule has a partial negative charge, and it can bind with a hydrogen atom that has a partial positive charge in another water molecule. This forms a hydrogen bond. Each water molecule can form up to four hydrogen bonds with other water molecules, and these bonds give water its cohesive nature. Cohesion helps water form droplets on a surface. Water does not...

adhesion

Water Climbing by Adhesion

Water can climb or stick to surfaces because of adhesion, which is the attraction between different kinds of molecules. In water, this is easy to see on polar surfaces such as glass or cellulose in plants. The positive hydrogen side of water is more attracted to the negative oxygen in silica than to nearby water molecules. This attraction helps explain capillary action. If a narrow glass tube is placed in a beaker of water, water molecules attach to the tube’s surface and the water level rises.

states of water

Water Phase Changes and Ice Density

Water changes between solid, liquid, and gas states as temperature and molecular motion change. In this lesson, the focus is on how water freezes, melts, vaporizes, and returns to liquid or solid form. The balance between intermolecular forces, which pull molecules together, and kinetic energy, which pushes them apart, controls each state. Water freezes when intermolecular forces become stronger than kinetic energy. Unlike most substances, ice is less dense than liquid water. This happens...

specific heat

How Specific Heat Affects Temperature

Specific heat capacity describes how much energy a substance needs to rise by 1 degree Celsius for each gram. It is often written with calories, grams, and degrees Celsius, but it can also be shown in joules, kilograms, and Kelvin. For water, 1 gram needs 1 calorie to increase by 1°C, which is also written as 1 cal/g-°C or 4186 J/kg/K. Water has a high specific heat capacity, so it takes in a large amount of heat before its temperature changes much. It also gives off a lot of heat when it...

vaporization

Vaporization, Boiling, and Evaporation

Vaporization changes a liquid into vapor when temperature adds enough kinetic energy to overcome intermolecular forces. It is a surface phenomenon, which means it starts at the liquid’s surface. The energy needed to vaporize a set amount of liquid at a given pressure and constant temperature is called the heat of vaporization. Water shows this process clearly. When liquid water is vaporized, it becomes steam. One way this happens is boiling, which occurs when vapor bubbles form beneath the...

solvents

Water as a Biological Solvent

Water acts as a biological solvent in many living systems. A solvent is a substance, usually a liquid, that dissolves another substance called a solute. When a solvent and a solute mix, they form a solution, which is a uniform mixture of both parts. Water is called a universal biological solvent because its polar structure helps it dissolve many other polar compounds. Polarity means that one side of the molecule has a slight positive charge and the other side has a slight negative charge.

carbon skeletons

Carbon Backbones in Biomolecules

Carbon backbones give biological molecules their structure and flexibility. Living things are built from macromolecules that contain carbon atoms, and organic compounds are defined by a carbon backbone. Carbon is tetravalent, so each carbon atom can bond with four other atoms. Its valence electrons are stable, so carbon rarely becomes an ion. As carbon chains get longer, they can form ring structures, double bonds, and branching side chains. Carbon-carbon bonds create the carbon skeleton.

key terms and concepts

Explore elements, compounds, and how they differ. Learn about atomic and molecular elements, covalent molecules, ionic compounds, and examples like methanol and NaCl.

Elements, Compounds, and Bonding | JoVE K12

JoVE Core series brings biology to life through over 300 concise and easy-to-understand animated video lessons that explain key concepts in biology, plus more than 150 scientist-in-action videos that show actual research experiments conducted in today’s laboratories.

biology

C-PS1-2

What is Matter?

The substance of the universe&#8212;from a grain of sand to a star&#8212;is called matter. Scientists define matter as anything that occupies space and ...

physical-and-chemical-properties-of-matter

Physical and Chemical Properties of Matter

The characteristics that enable us to distinguish one substance from another are called properties.

Physical Properties of Matter

A physical property is ...

States of Matter

Solids, liquids, and gases are the three states of matter commonly found on Earth. A solid is rigid and possesses a definite shape. A liquid flows and ...

Classifying Matter by State

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

Metallic Solids

Metallic solids such as crystals of copper, aluminum, and iron are formed by metal atoms. The structure of metallic crystals is often described as a ...

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Structures of Solids

Solids in which the atoms, ions, or molecules are arranged in a definite repeating pattern are known as crystalline solids. Metals and ionic compounds ...

Classification of Elements and Compounds

Atomic Structure

The Greek philosopher Democritus proposed that everything on Earth is made up of tiny particles called atomos, Greek for &#34;indivisible,&#34; from which ...

Subatomic Particles

Dalton was only partially correct about the particles that make up matter. All matter is composed of atoms, and atoms are composed of three smaller ...

Electronic Structure of Atoms


An atom comprises protons and neutrons, which are contained inside the dense, central&#160;core called the nucleus, with electrons present around the ...

The Periodic Table

As early chemists discovered more elements, they realized that various elements could be grouped by their similar chemical behaviors. One such grouping ...

X-ray Diffraction

Source: Faisal Alamgir, School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA
X-ray diffraction (XRD) is a technique ...

Electron Behavior

Electrons are negatively charged subatomic particles that are attracted to an orbit around the positively-charged nucleus of an atom. They reside in ...

Electron Configurations

Electron configurations and orbital diagrams can be determined by applying the Aufbau principle (each added electron occupies the subshell of lowest ...

Atomic Number and Mass Number

The number of protons in the nucleus of an atom is its atomic number (Z). This is the defining trait of an element. Its value determines the identity of ...

Use the periodic table as a model to predict the relative properties of elements based on the patterns of electrons in the outermost energy level of atoms.

Periodic Classification of the Elements

The periodic table arranges atoms based on increasing atomic number so that elements with the same chemical properties recur periodically. When their ...

The Periodic Table and Organismal Elements

Elements are the smallest units of matter that cannot be broken down further by chemical processes. There are 118 known elements, but not all of these are ...

Properties of Transition Metals

Transition metals are defined as those elements that have partially filled d orbitals. As shown in Figure 1, the d-block elements in groups 3&#8211;12 are ...

Chemical Reactions

A chemical reaction is a process by which the bonds in the atoms of substances are rearranged to generate new substances. Matter cannot be created or ...

Chemical Equations

Chemical equations represent the identities and relative quantities of substances involved in a chemical reaction. The substances undergoing reaction are ...

Introduction to Chemical Reactions

All chemical reactions begin with a reactant, the general term for one or more substances entering the reaction. Sodium and chloride ions, for example, ...

stoichiometry-product-yield-and-limiting-reactants

Stoichiometry, Product Yield, and Limiting Reactants

Chemical equations represent how a chemical reaction proceeds from reactants to products through physical or chemical change using chemical formulas.
...

Dynamic Equilibrium

A reversible chemical reaction represents a chemical process that proceeds in both forward (left to right) and reverse (right to left) directions. When ...

types-of-chemical-reactions-exchange-and-reversible

Types of Chemical Reactions: Exchange and Reversible

An exchange reaction is a chemical reaction in which both synthesis and decomposition occur, chemical bonds are both formed and broken, and chemical ...

chemical-stoichiometry-gases-using-ideal-gas-law-to-determine

Chemical Stoichiometry and Gases: Using Ideal Gas Law to Determine Moles

Chemical stoichiometry describes the quantitative relationships between reactants and products in chemical reactions.

In addition to measuring quantities ...

Construct and revise an explanation for the outcome of a simple chemical reaction based on the outermost electron states of atoms, trends in the periodic table, and knowledge of the patterns of chemical properties.

Molecular and Ionic 
Solids

Crystalline solids are divided into four types: molecular, ionic, metallic, and covalent network based on the type of constituent units and their ...

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

Molecules and Compounds

Atoms and Molecules

Everything in the universe is made up of matter, and matter is composed of a combination of elements. An atom is the smallest unit of ...

Coulomb's Law

Experiments with electric charges have shown that if two objects each have an electric charge, they exert an electric force on each other. The magnitude ...

comparison-between-electrical-and-gravitational-forces

Comparison Between Electrical And Gravitational Forces

There are four fundamental forces in nature: the gravitational force, the electromagnetic force, the strong nuclear force, and the weak nuclear force. To ...

Electric Charges

From lightning during thunderstorms to electronic devices, the phenomenon of electromagnetism is all around us. The electromagnetic force is one of the ...

electric-field-of-two-equal-and-opposite-charges

Electric Field of Two Equal and Opposite Charges

Atoms generally contain the same number of positively and negatively charged particles, protons, and electrons. Hence, they are electrically neutral. ...

Intermolecular Forces

Atoms and molecules interact through bonds (or forces): intramolecular and intermolecular. The forces are electrostatic as they arise from interactions ...

Electric Fields

Source: Yong P. Chen, PhD, Department of Physics &#38; Astronomy, College of Science, Purdue University, West Lafayette, IN
An electric field is generated ...

Chemical Bonds


Atoms participate in a chemical bond formation&#160;to acquire a completed valence-shell electron configuration similar to that of the noble gas nearest ...

Van der Waals Interactions

Atoms and molecules interact with each other through intermolecular forces. These electrostatic forces arise from attractive or repulsive interactions ...

Electric Dipoles and Dipole Moment

Consider two charges of equal magnitude but opposite signs. If they cannot be separated by an external electric field, the system is called a permanent ...

Noncovalent Attractions in Biomolecules

Noncovalent attractions are associations within and between molecules that influence the shape and structural stability of complexes. These interactions ...

Plan and conduct an investigation to gather evidence to compare the structure of substances at a bulk scale to infer the strength of various forces between particles.

C-PS1-3.

The Bohr Model

Following the work of Ernest Rutherford and his colleagues in the early twentieth century, the picture of atoms consisting of tiny dense nuclei surrounded ...

molecular-spectroscopy-absorption-and-emission

Molecular Spectroscopy: Absorption and Emission

Molecules possess discrete energy levels called quantum states. Unlike atoms, which have simpler energy levels, molecules possess additional rotational ...

Bond Energies and Bond Lengths

Stable molecules exist because covalent bonds hold the atoms together. The strength of a covalent bond is measured by the energy required to break it, ...

energy-diagrams-transition-states-and-intermediates

Energy Diagrams, Transition States, and Intermediates

Free-energy diagrams, or reaction coordinate diagrams, are graphs showing the energy changes that occur during a chemical reaction. The reaction ...

Balmer Series

The Bohr Model
Niels Bohr proposed a model for the hydrogen atom in 1913 that described discrete energy states are associated with a fixed electron orbit ...

The Energies of Atomic Orbitals

In an atom, the negatively charged electrons are attracted to the positively charged nucleus. In a multielectron atom, electron-electron repulsions are ...

Molecular Orbital Theory I

Overview of Molecular Orbital Theory

Molecular orbital theory describes the distribution of electrons in molecules in the same way as the distribution of ...

Develop a model to illustrate that the release or absorption of energy from a chemical reaction system depends upon the changes in total bond energy.

C-PS1-4

Elements, Compounds, and Bonding

Description

Transcript

Tags

More videos by Standards