Name: naming secondary, tertiary, and quaternary amines
Uploaded: 2025-05-22T09:05:42.000Z
Duration: 1 min 12 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

NC K-12 Science Standard Course of Study

9-12

Physical Science

Matter and its Interactions

PS.PSc.2.2

nomenclature-of-secondary-and-tertiary-amines

Nomenclature of Secondary and Tertiary Amines

אמינים שניוניים ושלישוניים יכולים להיות סימטריים עם קבוצות אלקיל זהות המחוברות לאטום החנקן או לא סימטריים כאשר קיים יותר מסוג אחד של קבוצת אלקיל (alkyl).
במינוח משותף, אמינים משניים ושלישוניים נקראים אלקילאמינים. עבור אמינים סימטריים, קידומות, di- ו tri- משמשים. במקרה של אמינים לא סימטריים, מחליפים בודדים מזוהים ורשומים בסדר אלפביתי.
במינוח IUPAC, האמינים נקראים N-alkylalkanamines.
כדי להקצות את השם IUPAC, זהה את קבוצות אלקיל המחוברות לאטום החנקן. לאחר מכן, בחר את השרשרת הארוכה ביותר כאב, בעוד שקבוצות אלקיל אחרות רשומות כמרכיבים.
כעת, ספרו את שרשרת האב על ידי הקצאת המספר הנמוך ביותר לאטום הפחמן הנושא חנקן.
הקצה לוקאנטים לכל מחליף. האות N משמשת כמאתר עבור קבוצות אלקיל המחוברות לאטום החנקן.
לבסוף, להרכיב את השם ולציין את התצורה של המרכז הכיראלי, אם קיים, בתחילת השם.

﻿המינוח של אמינים משניים ושלישוניים

<div style="direction:rtl"> 

האמינים המשניים והשלישיים הם נגזרות של אמוניה, כאשר שניים ושלושה מהמימנים שלה מוחלפים בקבוצות אלקיל, בהתאמה. אמינים משניים ושלישוניים יכולים להיות סימטריים עם קבוצות אלקיל זהות המחוברות לאטום החנקן או לא סימטריים כאשר קיים יותר מסוג אחד של קבוצת אלקיל. המינוח הסטנדרטי של אמינים משניים ושלישוניים דומה לשמות שניתנו לאמינים הראשוניים. הם נקראים בדרך כלל אלקילאמינים. כפי שמתואר באיור 1, עבור אמינים משניים ושלישוניים סימטריים, נעשה שימוש בקידומות di- ו-tri- בהתאמה. מצד שני, במקרה של אמינים לא סימטריים, מתמירים בודדים מזוהים ומופיעים בסדר אלפביתי. 

<img alt="Figure1" src="/files/ftp_upload/12853/12853-PT_Figure_1.svg" style="text-align: center; height: 90px;"> 

איור 1. המינוח של אמינים משניים ושלישוניים סימטריים ואסימטריים. 

במינוח IUPAC, האמינים המשניים והשלישיים נקראים N-אלקילאלקנאמינים. שם IUPAC למבנה ניתן באמצעות הפרוטוקול הבא: 

ראשית, זהו את קבוצות האלקיל המחוברות לאטום החנקן. 

לאחר מכן, בחרו את השרשרת הארוכה ביותר בתור הראשית, בעוד שקבוצות אלקיל אחרות מופיעות בתור מתמירים. תוך כדי מספור שרשרת הפחמימנים הראשית, הקצו את המספר הנמוך ביותר לאטום הפחמן הנושא אטום חנקן. 

לאחר מכן, הקצו מיקומים לכל מתמיר. השתמשו באות N בתור המיקום לקבוצות האלקיל המחוברות לאטום החנקן. 

לבסוף, ציינו את הקונפיגורציה של המרכז הכיראלי בתחילת השם, אם קיים כזה. 

שתי דוגמאות של האמור לעיל מומחשות באיור 2. 

<img alt="Figure2" src="/files/ftp_upload/12853/12853-PT_Figure_2v2.svg" style="text-align: center; height: 115px;">

איור 2. שמות IUPAC של שני אמינים לדוגמה. 

שמות IUPAC עבור יוני אמוניום רבעוניים ניתנים על פי שמם כאמינים משניים ושלישוניים. עם זאת, הסיומת -amine מוחלפת באמוניום, ואחריה השם של היון בעל המטען ההפוך, כפי שמתואר באיור 3.

<img alt="Figure3" src="/files/ftp_upload/12853/12853-PT_Figure_3v2.svg" style="text-align: center; height: 115px;">

איור 3. שמות IUPAC של אמינים רבעוניים שונים.

</div>

האמינים המשניים והשלישוניים הם נגזרות של אמוניה, כאשר שניים ושלושה מהמימנים שלה מוחלפים על ידי קבוצות אלקיליות, בהתאמה. משני...

Education

JoVE Core

Organic Chemistry

כימיה אורגנית

Unit 1

יחידה 1

Amines

אמינים

KEY TERMS AND CONCEPTS

מונחים ומושגים מרכזיים

naming secondary, tertiary, and quaternary amines

Secondary and tertiary amines are ammonia derivatives with two or three hydrogen atoms replaced by alkyl groups. They may be symmetrical, with the same alkyl groups attached to nitrogen, or unsymmetrical, with more than one kind of alkyl group present.

These compounds are often named as alkylamines in standard naming. For symmetrical secondary and tertiary amines, the prefixes di- and tri- are used. For unsymmetrical amines, each substituent is named and listed in alphabetical order.

IUPAC naming uses the form N-alkylalkanamine for secondary and tertiary amines. To build the name, first identify the alkyl groups attached to nitrogen. Then choose the longest chain as the parent and number it so the carbon bonded to nitrogen gets the lowest possible number.

Next, assign locants to the substituents. Use the letter N to show alkyl groups attached directly to the nitrogen atom. If a chiral center is present, write its configuration at the beginning of the name.

Quaternary ammonium ions are named in a similar way. The suffix -amine is replaced with -ammonium, and the counterion is added to the name.

Naming Secondary, Tertiary, and Quaternary Amines

naming-secondary-tertiary-quaternary-amines

amines: introduction

Amines: Types and Classifications

Amines are organic derivatives of ammonia. They form when one or more ammonia protons are replaced by alkyl or aryl groups. Chemists sort amines by the number of organyl groups attached to the nitrogen atom. Primary amines have one organyl group on nitrogen. Secondary amines have two, and tertiary amines have three. If a fourth organyl group is present, the nitrogen carries a formal positive charge. These compounds are called quaternary ammonium salts. Amines are also grouped as aliphatic or...

nomenclature of primary amines

Naming Primary Amines in Organic Chemistry

Primary amines are named by following a few clear organic chemistry rules. These rules help identify the amino group, written as –NH2, and show how it connects to the carbon chain. Common names for primary amines use the alkyl group name plus the suffix -amine. In IUPAC naming, the final -e of the parent alkane is changed to -amine, which gives an alkanamine name. The longest carbon chain attached to the amine nitrogen is chosen, and the carbon bonded to nitrogen gets the lowest locant. Any...

nomenclature of secondary and tertiary amines

Secondary and tertiary amines are ammonia derivatives with two or three hydrogen atoms replaced by alkyl groups. They may be symmetrical, with the same alkyl groups attached to nitrogen, or unsymmetrical, with more than one kind of alkyl group present. These compounds are often named as alkylamines in standard naming. For symmetrical secondary and tertiary amines, the prefixes di- and tri- are used. For unsymmetrical amines, each substituent is named and listed in alphabetical order. IUPAC...

nomenclature of aryl and heterocyclic amines

nomenclature-of-aryl-and-heterocyclic-amines

Naming Aniline and Ring Amine Derivatives

Naming aniline and ring amine derivatives follows clear rules for aromatic and heterocyclic amines. The simplest aromatic amine is phenylamine, which has an –NH2 group directly attached to an aromatic ring. The common name for this skeleton is aniline. Functionalized anilines often use the prefixes ortho-, meta-, and para- to show where a substituent is placed on the ring. Many of these compounds also have trivial, or common, names. For systematic naming, the ring is numbered from the carbon...

structure of amines

Amines: Shape, Bonding, and Chirality

Amines have a nitrogen atom with a lone pair of electrons. That lone pair affects the shape of the molecule, the bond angles, and the bond lengths around nitrogen. In most amines, nitrogen is hybridized and attached to three substituents. The bond angle is about 108°, which is a little less than the 109.5° tetrahedral angle. The C–N–H bond angle is slightly larger at 112°, and the carbon-nitrogen bond length is 147 pm. This bond is longer than the carbon-oxygen bond in alcohols, which is 143...

physical properties of amines

Amines: Smell, Solubility, and Boiling Points

Amines show clear physical properties that depend on molecular size and structure. Low molecular weight amines are usually gases at room temperature, while higher molecular weight amines are often liquids or solids. Many low molecular weight amines also have a rotten fish-like smell, and diamines usually have a pungent odor. Amines are polar molecules, so they can take part in intermolecular hydrogen bonding. Primary and secondary amines have N–H bonds that allow these interactions. Because of...

basicity of aliphatic amines

How Aliphatic Amines Act as Bases

Aliphatic amines act as bases because the nitrogen atom can accept a proton from an acid. They can also behave as Lewis bases, since the nitrogen lone pair can form a covalent bond with an electrophile. These properties make amines useful examples of basic behavior in organic chemistry. Amine basicity is commonly described in two ways. One method uses the basicity constant, K b, for the reaction in which the amine removes a proton from water. A lower K b means a stronger base. By this measure,...

basicity of aromatic amines

Why Aromatic Amines Are Less Basic

Aromatic amines are less basic than aliphatic amines because the nitrogen lone pair can share electrons with the aryl ring through resonance. When the lone pair is delocalized, it is less available to accept a proton, so the amine shows weaker basicity. Substituents on the aryl ring can change this effect. Electron-donating groups increase electron density on the ring and raise the basicity of the amine. Electron-withdrawing groups have the opposite effect and can lower basicity sharply. A...

basicity of heterocyclic aromatic amines

Why Ring Nitrogen Changes Amine Basicity

Heterocyclic amines can show very different basicity depending on where the nitrogen atom sits in the ring. When nitrogen is part of an alicyclic ring, the amine behaves much like an alkylamine. When nitrogen is part of an aromatic ring, the compound is usually much less basic than its alicyclic counterpart. Piperidine and pyridine show this difference clearly. Piperidine is significantly more basic than pyridine, with pKb values of 2.8 and 8.8, respectively. The reason is the orbital that...

nmr spectroscopy of amines

Amines in NMR: Key Signal Patterns

Amines in NMR spectroscopy show clear signal patterns that help identify their structure. In proton NMR, primary amines and secondary amines give a broad N–H signal between δ 0.5 and 5 ppm. The exact position can change with sample concentration, hydrogen bonding, and the solvent used. The N–H protons in amines are labile, which means they exchange quickly in solution. Because of this fast proton exchange, they do not split with nearby protons. Their peak stays broad and does not reveal the...

mass spectrometry of amines

Amines in Mass Spectra

Amines in mass spectra show a clear pattern that helps identify them. Their parent ions often have odd molecular weights, which follows the nitrogen rule. That rule says a molecule with an odd number of nitrogen atoms gives a molecular ion with an odd molecular weight. Amines also break apart in a characteristic way during alpha cleavage. Alpha cleavage means the bond next to the nitrogen atom splits. This forms nitrogen-containing cations called iminium ions and alkyl radicals. The molecular...

preparation of amines: alkylation of ammonia and amines

preparation-of-amines-alkylation-of-ammonia-and-amines

Alkylation of Ammonia to Make Amines

To make only primary amines, chemists use specific reaction conditions such as excess ammonia. Ammonia is the most common substrate because it is cheap and readily available. Tertiary alkyl halides are not the best choice for alkylation because they are too hindered. Secondary alkyl halides can react, but they are also less preferred because they tend to undergo elimination reactions.

preparation of 1&deg; amines: azide synthesis

Azide Route to Primary Amines

Azide synthesis is a useful route to primary amines. It helps avoid the polyalkylation that can happen when ammonia is alkylated directly. In that direct reaction, unwanted polyalkylated amines and a quaternary ammonium salt can form. In the azide method, azide ions act as strong nucleophiles. A nucleophile is a species that donates an electron pair in a reaction. They react with unhindered alkyl halides to make alkyl azides. Alkyl azides do not take part in more nucleophilic substitution...

preparation of 1&deg; amines: gabriel synthesis

preparation-of-1-amines-gabriel-synthesis

Gabriel Synthesis for Primary Amines

Gabriel synthesis is a selective way to make primary amines. It avoids direct alkylation, which can create polyalkylated products. For that reason, it is a preferred method when the goal is to make only one alkylated amine product. The reaction starts with phthalimide, which holds nitrogen in a protected form. A strong base such as NaOH or KOH removes a hydrogen from phthalimide and forms an anion. This anion acts as a nucleophile and attacks an alkyl halide, giving N-alkylphthalimide. The...

preparation of amines: reduction of oximes and nitro compounds

preparation-of-amines-reduction-of-oximes-and-nitro-compounds

Routes to Amines from Oximes and Nitro Groups

Oximes and nitro compounds can both be converted into primary amines. Oximes are reduced by catalytic hydrogenation, hydride reduction, or sodium metal reduction. A primary amine is an amine with one carbon group attached to nitrogen, so this step is an important way to build nitrogen-containing molecules. Nitro compounds follow a similar path to primary amines. Aliphatic and aromatic nitro compounds can be reduced by catalytic hydrogenation or by active metals such as Fe, Zn, and Sn in the...

preparation of amines: reduction of amides and nitriles

preparation-of-amines-reduction-of-amides-and-nitriles

Making Amines from Nitriles and Amides

Nitriles and amides can both be turned into amines by reduction. Nitriles are reduced to primary amines with reducing agents such as lithium aluminum hydride or by catalytic hydrogenation. In this reaction, the amino group is added with one extra carbon in the chain. Nitriles are often made first from alkyl halides and sodium cyanide. This step follows an S N 2 mechanism, and primary alkyl halides are the best substrates for preparing nitriles. The nitrile can then be reduced to the primary...

preparation of amines: reductive amination of aldehydes and ketones

preparation-of-amines-reductive-amination-of-aldehydes-and-ketones

Making Amines with Reductive Amination

Reductive amination is a way to make amines from carbonyl compounds and primary amines. A carbonyl compound is a molecule with a carbon-oxygen double bond. The reaction first forms an imine, and then the same mixture is reduced to give a secondary amine. Selective reducing agents make this step work. Sodium cyanoborohydride and sodium triacetoxyborohydride are commonly used because they reduce the imine without reacting too aggressively. Reductive amination with sodium cyanoborohydride is...

preparation of 1&deg; amines: hofmann and curtius rearrangement overview

preparation-of-1-amines-hofmann-and-curtius-rearrangement-overview

Carbon-Loss Routes to Primary Amines

Carbon-loss reactions can turn certain amides into primary amines. The Hofmann rearrangement uses an aqueous base and a halogen to remove the carbonyl group as carbon dioxide and form a primary amine. It often gives aryl and alkyl primary amines in high yield, and the products are free of secondary and tertiary amine contamination. The Curtius rearrangement follows a similar goal but starts from an acyl azide. When heated, the acyl azide converts into a primary amine and releases nitrogen gas...

preparation of 1&deg; amines: hofmann and curtius rearrangement mechanism

preparation-of-1-amines-hofmann-and-curtius-rearrangement-mechanism

Primary Amine Synthesis by Rearrangement

Hofmann and Curtius rearrangements are used to make primary amines from carboxylic acid derivatives. In the Hofmann rearrangement, a primary amide is treated with a base and then halogenated to form an N-haloamide. A second proton loss gives a stable anionic species that rearranges to an isocyanate after an alkyl group migrates from the carbonyl carbon to the nearby nitrogen. The isocyanate then reacts with water to form carbamic acid. Carbamic acid breaks down on its own to release carbon...

amines to amides: acylation of amines

Using Acylation to Modify Amines

Amines can be modified by acylation to form amides. In this reaction, a carboxylic acid derivative such as an acid chloride, ester, or anhydride provides the acyl group. The process uses two equivalents of amine, and each one has a different job. The first amine acts as a nucleophile. It attacks the carbonyl carbon and forms a tetrahedral intermediate. The leaving group then leaves, and the C=O bond is restored. The second amine acts as a Brønsted base, meaning it removes a proton from the...

amines to alkenes: hofmann elimination

Hofmann Elimination and Alkene Formation

Hofmann elimination turns an amine into an alkene through an E2 elimination. The amine is first changed into a good leaving group. A quaternary ammonium salt is formed by treating the amine with an excess of alkyl halide, which gives a halide salt. Next, the halide salt is converted into a hydroxide salt. This hydroxide salt acts as a base during the elimination. With heat, the hydroxide removes a proton from the beta carbon. At the same time, an alkene forms and a neutral amine molecule...

amines to alkenes: cope elimination

Syn Elimination in Cope Reaction

The Cope elimination reaction converts tertiary amines into alkenes. It uses hydrogen peroxide and heat. The process starts with oxidation of the tertiary amine to form an amine oxide. The amine oxide then acts as a base during the elimination step. The reaction follows syn stereochemistry, which means the groups leave from the same side. It also proceeds through a cyclic transition state. The N,N-dimethyl hydroxylamine group is formed as the leaving group. The major product is usually the...

1&deg; amines to diazonium or aryldiazonium salts: diazotization with nano2 overview

1-amines-to-diazonium-or-aryldiazonium-salts-diazotization-with-nano2

Nitrous Acid Reactions with Amines

Nitrous acid reacts with amines in acidic conditions, and the products depend on the type of amine. It is a key nitrogen-containing acid, but it is weaker than nitric acid. Nitrous acid has a pKa of 3.37, so it ionizes in water to form nitrite ion and hydronium ion. Nitrous acid is unstable, so it is made in situ, or formed in the reaction mixture as needed. A sodium nitrite solution is combined with a cold aqueous acid such as hydrochloric acid or sulfuric acid. In acid, the –OH group of...

1&deg; amines to diazonium or aryldiazonium salts: diazotization with nano2 mechanism

Diazotizing Primary Amines with Nitrous Acid

Diazotizing primary amines with nitrous acid forms diazonium salts. The reaction begins with nitrous acid, a weak and unstable acid made in situ from sodium nitrite and cold, dilute hydrochloric acid. In acidic solution, nitrous acid is protonated and loses water to form the nitrosonium ion, which acts as the electrophile. Primary amines react with the nitrosonium ion to start diazotization. The amine serves as the nucleophile and attacks the electrophile. After deprotonation, an N-nitrosamine...

2&deg; amines to n-nitrosamines: reaction with nano2

2-amines-to-n-nitrosamines-reaction-with-nano2

Nitrosamine Formation from Secondary Amines

Secondary amines can form N-nitrosamines when they react with nitrous acid. Nitrous acid is weak and unstable, so it is made in the reaction mixture from sodium nitrite and a strong acid such as hydrochloric acid or sulfuric acid. The reaction is carried out in cold conditions. In acid, nitrous acid becomes protonated. It then loses water and forms the nitrosonium ion, a reactive electrophile. The secondary amine acts as a nucleophile and attacks this ion. That step gives an N-nitrosammonium...

diazonium group substitution with halogens and cyanide: sandmeyer and schiemann reactions

diazonium-group-substitution-with-halogens-cyanide-sandmeyer

Making Aryl Halides from Diazonium Salts

Arenediazonium salts can be used to make substituted aromatic compounds. In these reactions, the diazonium group is replaced by other functional groups such as halides, hydroxyl, and nitrile. The transcript focuses on how this chemistry is used to form aryl chlorides, bromides, fluorides, iodides, and nitriles. When arenediazonium salts react with copper(I) salts of chloride, bromide, or cyanide, they form the corresponding aryl chloride, aryl bromide, or aryl nitrile. These are called...

diazonium group substitution: &ndash;oh and &ndash;h

Arenediazonium Salt Reactions: Phenols and H

Arenediazonium salt reactions show how a diazonium group can be replaced by other functional groups. These reactions begin with diazotization, the formation of an arenediazonium salt from a primary arylamine. The process uses nitrous acid, which is made in situ from sodium nitrite and a strong acid under cold conditions. In acidic solution, nitrous acid breaks down to form nitrosonium ions. A primary arylamine then attacks the nitrosonium ion. This first step leads to an N-nitrosoaminium ion...

aryldiazonium salts to azo dyes: diazo coupling

aryldiazonium-salts-to-azo-dyes-diazo-coupling

Diazo Coupling and Azo Dye Formation

Diazo coupling is the reaction that forms azo dyes from aryldiazonium salts and highly activated aromatic compounds. The product contains an —N=N— azo linkage, and the nitrogen atoms from the diazonium salt remain in the product. Phenols and arylamines are common activated partners for this reaction. The coupling usually takes place at the para position on the aromatic ring. If the para position is already occupied, the reaction shifts to the ortho position instead. The mechanism is an...

amines to sulfonamides: the hinsberg test

Amines and the Hinsberg Reagent Test

The Hinsberg test identifies primary, secondary, and tertiary amines by their reaction with benzenesulfonyl chloride, also called the Hinsberg reagent. It is named after Oscar Hinsberg. The test uses excess aqueous base, and the mixture is then acidified to show different results for each amine type. A primary amine reacts with the Hinsberg reagent to form an N-substituted benzenesulfonamide. The sulfonyl group pulls electron density away and makes the N-H proton acidic. Because of this, base...

key terms and concepts

Learn how to name secondary and tertiary amines, including symmetric and unsymmetric cases, IUPAC N-alkylalkanamine rules, and quaternary ammonium ions.

Naming Secondary, Tertiary, and Quaternary Amines | JoVE K12

organic chemistry

JoVE Core Organic Chemistry explains basic concepts of stereochemistry, reactions, and mechanisms using concise and easy-to-understand animated video lessons. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

Classifying Matter by State

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

Elements: Chemical Symbols and Isotopes

A chemical symbol is an abbreviation used to indicate an element or an atom of an element. For example, the symbol for mercury is Hg. The same symbol is ...

Molecules and Compounds

Atoms and Molecules

Everything in the universe is made up of matter, and matter is composed of a combination of elements. An atom is the smallest unit of ...

Solution Formation

There is no one solvent that can dissolve every type of solute. Some substances that readily dissolve in a certain solvent might be insoluble in a ...

Colloids

Children at play often make suspensions such as mixtures of mud and water, flour and water, or a suspension of solid pigments in water known as tempera ...

Construct an explanation to classify matter as a pure substance or mixture; homogeneous or heterogeneous; element or compound; solution, colloid or suspension.

PS.PSc.1.1

Phase Transitions

Whether solid, liquid, or gas, a substance&#39;s state depends on the order and arrangement of its particles (atoms, molecules, or ions). Particles in the ...

phase-transitions-vaporization-and-condensation

Phase Transitions: Vaporization and Condensation

The physical form of a substance changes on changing its temperature. For example, raising the temperature of a liquid causes the liquid to vaporize ...

Vapor Pressure

When a liquid vaporizes in a closed container, gas molecules cannot escape. As these gas phase molecules move randomly about, they will occasionally ...

Clausius-Clapeyron Equation

The equilibrium between a liquid and its vapor depends on the temperature of the system; a rise in temperature causes a corresponding rise in the vapor ...

Phase Transitions: Melting and Freezing

Heating a crystalline solid increases the average energy of its atoms, molecules, or ions, and the solid gets hotter. At some point, the added energy ...

phase-transitions-sublimation-and-deposition

Phase Transitions: Sublimation and Deposition

Some solids can transition directly into the gaseous state, bypassing the liquid state, via a process known as sublimation. At room temperature and ...

Heating and Cooling Curves

When a substance&#8212;isolated from its environment&#8212;is subjected to heat changes, corresponding changes in temperature and phase of the substance ...

Phase Diagrams

A phase diagram combines plots of pressure versus temperature for the liquid-gas, solid-liquid, and solid-gas phase-transition equilibria of a substance. ...

Use models to compare the phases of matter and the physical changes they undergo.

PS.PSc.1.2

physical-and-chemical-properties-of-matter

Physical and Chemical Properties of Matter

The characteristics that enable us to distinguish one substance from another are called properties.

Physical Properties of Matter

A physical property is ...

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

Intermolecular vs Intramolecular Forces

Intermolecular forces (IMF) are electrostatic attractions arising from charge-charge interactions between molecules. The strength of the intermolecular ...

Intermolecular Forces

Atoms and molecules interact through bonds (or forces): intramolecular and intermolecular. The forces are electrostatic as they arise from interactions ...

comparing-intermolecular-forces-melting-point-boiling-point

Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility

Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

Carry out investigations to compare physical and chemical properties of matter.

PS.PSc.1.3

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Subatomic Particles

Dalton was only partially correct about the particles that make up matter. All matter is composed of atoms, and atoms are composed of three smaller ...

The Bohr Model

Following the work of Ernest Rutherford and his colleagues in the early twentieth century, the picture of atoms consisting of tiny dense nuclei surrounded ...

Emission Spectra

When solids, liquids, or condensed gases are heated sufficiently, they radiate some of the excess energy as light. Photons produced in this manner have a ...

The de Broglie Wavelength

In the macroscopic world, objects that are large enough to be seen by the naked eye follow the rules of classical physics. A billiard ball moving on a ...

The Uncertainty Principle

Werner Heisenberg considered the limits of how accurately one can measure properties of an electron or other microscopic particles. He determined that ...

Use models to interpret the data presented in Bohr diagrams and electron dot diagrams for neutral atoms of elements 1 through 18.

PS.PSc.1.4

Ions and Ionic Charges

In ordinary chemical reactions, the nucleus &mdash; which contains the protons and neutrons of each atom and thus identifies the element &mdash; remains ...

Use models to compare representations of atoms, ions, and isotopes.

PS.PSc.1.5

The Periodic Table

As early chemists discovered more elements, they realized that various elements could be grouped by their similar chemical behaviors. One such grouping ...

Periodic Classification of the Elements

The periodic table arranges atoms based on increasing atomic number so that elements with the same chemical properties recur periodically. When their ...

Use the Periodic Table as a model to predict the relative properties (metallic/nonmetallic character, ionic charge, and reactivity) and arrangement of elements based on the pattern of valence electrons in the outermost energy levels of atoms.

PS.PSc.1.6

Understand types, properties, and structure of matter.

Naming Secondary, Tertiary, and Quaternary Amines

Description

Transcript

Tags

More videos by Standards