Question 1

Why is only a fraction of energy transferred between trophic levels in this caterpillar experiment?

Accepted Answer

Energy transfer between trophic levels is inefficient because organisms lose energy through respiration, waste production, and heat. In this experiment, caterpillars consume cabbage but convert only a portion into biomass; the remainder is lost as frass and respiratory energy. This demonstrates why energy available at each trophic level decreases moving up the food chain.

Question 2

How do you calculate the percent biomass of an organism in this lab?

Accepted Answer

Percent biomass is calculated by dividing the final dry mass by the final wet mass and multiplying by 100. For example, if cabbage has a final dry mass of 15 grams and final wet mass of 100 grams, the percent biomass is 15%. This calculation reveals how much of an organism's total weight consists of actual biomass versus water content.

Question 3

What is the purpose of comparing fed and unfed caterpillar groups?

Accepted Answer

Comparing fed caterpillars with access to cabbage against unfed caterpillars without food demonstrates energy dynamics in a trophic system. The fed group gains energy from cabbage consumption and converts it into biomass, while the unfed group loses energy through respiration and frass production. This comparison illustrates how energy flows through feeding relationships.

Question 4

Why is dry mass used instead of wet mass to represent biomass?

Accepted Answer

Dry mass represents actual biomass because it excludes water content, which varies and does not represent stored energy. Wet mass includes water weight that fluctuates based on hydration levels. By measuring dry mass after drying organisms at 37°C for 48 hours, you obtain an accurate measure of the energy-containing organic material in caterpillars and cabbage.

Question 5

How does the first law of thermodynamics apply to this caterpillar energy experiment?

Accepted Answer

The first law of thermodynamics states that energy cannot be created or destroyed, only transformed. In this experiment, the net energy for both caterpillar groups equals zero because all energy gained from cabbage consumption is accounted for in biomass growth, frass production, and respiration. This confirms energy conservation within the system.

Question 6

What does caterpillar frass reveal about energy transfer efficiency?

Accepted Answer

Caterpillar frass represents energy lost from the food chain because it contains undigested or partially digested plant material. By measuring frass dry mass and calculating its energy content in kilocalories, you quantify energy that passed through caterpillars but was not converted into biomass. This demonstrates significant energy loss at each trophic level.

Question 7

How do you estimate initial biomass from wet mass measurements?

Accepted Answer

Initial biomass is estimated by multiplying the percent biomass by the initial wet mass. For example, if cabbage has 15% biomass and initial wet mass of 100 grams, initial biomass equals 15 grams. This calculation allows you to determine starting energy content before the experiment, enabling comparison with final biomass and energy values.

דינמיקת אנרגיה