Question 1

Why are synchronous motors preferred for applications requiring constant speed?

Accepted Answer

Synchronous motors maintain constant rotor speed independent of shaft load because the rotor speed equals the stator magnetic field rotation rate. This near-zero speed regulation makes them ideal for fixed-speed applications like ball mills and power plant frequency regulation, where tight speed control is essential regardless of mechanical load variations.

Question 2

How does a synchronous motor start if it cannot initially run at synchronous speed?

Accepted Answer

A synchronous motor initially operates as an induction motor, where the stator's rotating magnetic field induces current in the squirrel cage rotor, creating rotation. Once the machine approaches synchronous speed, DC voltage is applied to the field winding, locking the rotor and stator magnetic fields together. This transition enables the motor to achieve and maintain synchronous operation.

Question 3

What is torque angle and how does it change with motor load?

Accepted Answer

Torque angle is the angular displacement between rotor and stator magnetic field poles. At lower loads, torque angle remains small, but increases as mechanical load rises. If load becomes excessive, torque angle grows so large that the rotor loses synchronism with the stator field, exceeding the motor's breakdown torque limit and causing failure.

Question 4

What role does the DC power supply play in synchronous motor operation?

Accepted Answer

The DC power supply excites the field winding to generate the rotor's fixed magnetic field, replacing initial induction-based excitation. Field resistance controls field current, while field voltage can be varied to adjust field current magnitude. This electromagnetic excitation locks the rotor and stator fields, enabling synchronous operation and allowing the motor to maintain constant speed under varying loads.

Question 5

How is phase resistance measured in a synchronous motor characterization?

Accepted Answer

Phase resistance is determined by applying DC voltage between a phase terminal and neutral, then measuring the resulting DC current. The resistance equals the voltage-to-current ratio. Phase resistance contributes to machine losses and causes voltage drop across the armature, making it a critical parameter in motor performance analysis and efficiency calculations.

Question 6

What structural components make up a synchronous machine?

Accepted Answer

A synchronous machine consists of a rotating inner core called the rotor and a stationary outer ring called the stator. The rotor magnetic field is generated using permanent magnets or a DC power source. In three-phase motors, current flows through the stator's three separate coil sets, each connected to its own phase, producing a rotating magnetic field that couples with the rotor field.

Question 7

How does output power relate to torque angle in a synchronous motor?

Accepted Answer

Output power is directly related to torque angle, with maximum power occurring when torque angle is zero. As torque angle increases due to increased mechanical load, the relationship between power and angle becomes nonlinear. Understanding this relationship helps engineers optimize motor performance and prevent operation beyond safe torque angle limits.

אפיון מכונה סינכרוני AC

Browse More Videos