Question 1

What types of compounds are best analyzed using gas chromatography?

Accepted Answer

Gas chromatography is ideally suited for small volatile, nonpolar compounds less than 1,000 daltons in mass. GC requires analytes to vaporize into the gas phase, making it perfect for non-aqueous solutions. For larger, aqueous, or polar molecules that are difficult to vaporize, liquid chromatography is a more useful alternative.

Question 2

How does the stationary phase in a GC column separate different compounds?

Accepted Answer

Analytes separate based on their chemical affinity with the stationary phase coating the column's inner walls. Compounds with low affinity move quickly through the column, while molecules with high affinity are slowed as they adsorb to the column walls. The time a compound spends in the column, called retention time, allows compounds to be identified and distinguished from one another.

Question 3

What is flame-ionization detection and how does it quantify compounds?

Accepted Answer

Flame-ionization detection (FID) combusts analytes in a hydrogen-air flame as they exit the column, producing carbon ions that induce a current in nearby electrodes. The current is directly proportional to carbon mass, allowing compound concentration to be determined. FID is widely used because it detects virtually any organic compound and is unaffected by noncombustible gases and water.

Question 4

What does a chromatogram show and what do peak shapes indicate?

Accepted Answer

A chromatogram is a plot of FID signal versus time, showing each eluted component as a peak. Ideally, each peak has a symmetrical, Gaussian shape. Asymmetrical features like peak tailing and peak fronting can indicate overloading, injection problems, or the presence of functional groups such as carboxylic acids that stick to the column.

Question 5

How does temperature affect sample separation in gas chromatography?

Accepted Answer

Increasing column temperature accelerates sample movement through the column. At higher temperatures, samples move faster, reducing analysis time. However, peak heights may change while the area under the curve remains constant, preserving quantitative accuracy. Temperature can be held constant for isothermal runs or programmed as a gradient for more complex separations.

Question 6

What are the key steps for preparing and running a GC sample?

Accepted Answer

Fill a vial with wash solvent like acetonitrile or methanol, then prepare your sample using glass syringes and vials to avoid plastic contamination. Add the sample to a vial with a pipette, filling at least halfway so the autosampler syringe is fully submerged. Load vials into the autosampler rack, zero the baseline on the computer, and press start to begin the analysis.

Question 7

How is GC combined with other techniques for chemical identification?

Accepted Answer

GC is commonly used in tandem with mass spectrometry, called GC-MS, to unambiguously identify chemicals in samples. GC first separates complex mixtures into individual components, while mass spectrometry separates molecules based on their mass-to-charge ratio, providing precise mass information and chemical identity. This combination is a powerful tool for environmental monitoring and chemical analysis.

כרומטוגרפיה של גז (GC) עם גילוי יינון להבה - חידון הערכה