Question 1

How is torque defined and what role does the lever arm play?

Accepted Answer

Torque is the cross product of the lever arm—the distance from the axis of rotation—and the applied force. Only the perpendicular component of the force contributes to torque magnitude, calculated using the sine of the angle between the force and rotation arm. Increasing the lever arm distance directly increases torque, which is why using the end of a wrench rather than the middle produces greater rotational effect.

Question 2

What is the relationship between torque and angular acceleration?

Accepted Answer

Torque causes angular acceleration in rotational systems, analogous to how force causes linear acceleration in translational systems. This relationship is expressed as the rotational equivalent of Newton's second law, where torque equals rotational inertia multiplied by angular acceleration. Greater torque generates greater angular acceleration for systems with the same rotational inertia.

Question 3

When does a rotating system achieve equilibrium?

Accepted Answer

A rotating system achieves equilibrium when the net torque equals zero, resulting in zero angular acceleration. At equilibrium, the system will not rotate if released from rest. This can be established by balancing weights on opposite sides of the axis of rotation so torques equally oppose one another, with counter-clockwise torques positive and clockwise torques negative.

Question 4

How does changing the angle of applied force affect the torque required for equilibrium?

Accepted Answer

When a beam rotates from horizontal by an angle, only the component of gravitational weight perpendicular to the beam contributes to torque. As rotation angle increases, the perpendicular force component decreases, requiring less measured force to maintain equilibrium. This demonstrates that torque depends critically on the perpendicular relationship between force and lever arm.

Question 5

What real-world examples demonstrate how torque affects mechanical systems?

Accepted Answer

A seesaw demonstrates torque principles: when both sides have similar lever arms, the heavier set of people generates more torque and lifts the lighter side. Vehicle performance depends on torque; greater torque produces greater angular acceleration and linear acceleration. Vehicles with increased torque can accommodate more inertia, enabling them to tow massive loads while maintaining the same acceleration.

Question 6

Why does only the perpendicular component of force contribute to torque?

Accepted Answer

Torque is defined as the cross product of the lever arm and force, meaning only the force component perpendicular to the lever arm produces rotational effect. The parallel component pushes along the lever arm without causing rotation. Using the sine of the angle between force and rotation arm isolates this perpendicular component, which is why angling a wrench reduces its effectiveness.

Question 7

How can multiple weights balance a beam to achieve rotational equilibrium?

Accepted Answer

Multiple weights can balance a beam by positioning them so their individual torques sum to zero. Each weight's torque depends on its mass, distance from the axis, and the perpendicular force component. By strategically placing different mass combinations at various distances on opposite sides, the clockwise and counter-clockwise torques cancel, creating equilibrium where the beam remains stationary.

מומנט - חידון הערכה