Question 1

How does ultrasound imaging work to create images of internal structures?

Accepted Answer

Ultrasound emits acoustic waves from a transducer and records echoes as waves reflect at tissue boundaries. The intensity of reflected waves and distance from the transducer create anatomical images. Acoustic impedance, which depends on tissue density and sound wave speed, determines how much sound reflects. Higher impedance differences produce stronger reflections, while lower differences result in partial reflections.

Question 2

What are the main advantages of ultrasound compared to other imaging modalities?

Accepted Answer

Ultrasound is relatively inexpensive, portable, and versatile compared to CT, MRI, and NIRF imaging. It requires no contrast agents and is noninvasive. However, ultrasound has limitations in resolution and penetration depth. Abdominal gas and excess body weight can diminish image quality by limiting sound wave propagation or attenuating waves through overlying tissues.

Question 3

What is the difference between B-mode, M-mode, and Doppler ultrasound imaging?

Accepted Answer

B-mode displays acoustic impedance of a two-dimensional tissue slice. M-mode captures rapid tissue movement, such as cardiac function. Doppler mode evaluates blood flow direction and velocity. Color Doppler provides qualitative assessment where red indicates flow toward the transducer and blue indicates flow away, with darker colors representing low velocity and lighter colors representing higher velocity.

Question 4

How is circumferential cyclic strain measured using M-mode ultrasound?

Accepted Answer

M-mode imaging shows the anterior and posterior vessel walls as bright lines. Circumferential cyclic strain is calculated from inner aortic diameter values at peak systole, when the aorta is largest, and end diastole, when it is smallest. The anterior wall exhibits more motion than the posterior wall, allowing strain quantification from these diameter measurements.

Question 5

What preparation steps are necessary before performing ultrasound imaging on a small animal?

Accepted Answer

The animal must be anesthetized using isoflurane and positioned on the imaging stage with secured paws and electrodes. Abdominal hair is removed with depilatory cream, and a rectal probe is inserted for body temperature measurement. Warmed ultrasonic transducing gel is applied to the abdomen. Physiological monitoring including heart rate, temperature, ECG, and respiration signals must be active during imaging.

Question 6

How can pulsed wave Doppler mode quantify blood flow velocity in vessels?

Accepted Answer

Pulsed wave Doppler mode uses two yellow angled lines to align with vessel walls. The beam angle is adjusted so the dotted line runs parallel to anterior and posterior vessel walls. Once aligned, baseline, velocity, and Doppler gain controls center and brighten the waveforms, enabling quantitative measurement of blood flow velocity through the vessel.

Question 7

What clinical applications does high-frequency ultrasound imaging support?

Accepted Answer

High-frequency ultrasound visualizes the umbilical vein and uterine artery to measure vessel diameter and maximum blood flow velocity in placental research. Cranial ultrasound is reliable for neonates with congenital anomalies or brain lesions, performed noninvasively at the bedside. Color Doppler visualizes intracerebral vessels and detects clots in transverse sinuses, supporting diagnosis of neonatal brain conditions.

הדמיית אולטרסאונד בתדר גבוה של אב העורקים בבטן

Browse More Videos