Question 1

How does a spectrophotometer measure the concentration of a solute in a solution?

Accepted Answer

A spectrophotometer measures concentration by quantifying how much light a sample absorbs. When a beam of light passes through the sample, molecules absorb photons, reducing light intensity. The instrument measures absorbance, which relates directly to solute concentration through the Beer-Lambert Law. This linear relationship between absorbance and concentration allows researchers to determine unknown concentrations from measured absorbance values.

Question 2

What is the difference between transmittance and absorbance in spectrophotometry?

Accepted Answer

Transmittance is the fraction of light that passes through a sample, calculated as the intensity of transmitted light divided by incident light intensity. Absorbance is the inverse logarithm of transmittance and represents how much light the sample absorbs. Spectrophotometers directly measure absorbance, which is the more useful parameter for determining solute concentration using the Beer-Lambert Law.

Question 3

What are the main components of a spectrophotometer and what does each do?

Accepted Answer

A spectrophotometer contains a light source, collimator that focuses light into a straight beam, monochromator that separates light into component wavelengths, and a wavelength selector or slit for choosing the desired wavelength. It also includes a sample holder for cuvettes, a photoelectric detector that measures absorbed photons, and a display screen. Newer models connect directly to computers for experiment control and data display.

Question 4

Why is it important to prepare a blank solution before measuring a sample?

Accepted Answer

A blank solution contains the same solvent and buffer as the sample but without the analyte. The cell and solvent can scatter light, creating background absorbance. By zeroing the instrument with the blank, this background is subtracted from your sample measurement, ensuring accurate absorbance readings. The blank must have the same pH and similar ionic strength as your sample for proper calibration.

Question 5

How can spectrophotometry be used to monitor enzyme activity in real time?

Accepted Answer

Spectrophotometry monitors enzyme activity by tracking changes in absorbance over time. For example, if an enzymatic reaction produces or consumes a compound with a specific absorbance maximum, researchers can measure absorbance at that wavelength repeatedly. The rate of absorbance change reflects the reaction rate, allowing calculation of enzyme kinetics. This method is particularly useful for monitoring disappearance of reaction intermediates at specific wavelengths like 452 nanometers.

Question 6

What are the advantages of microvolume spectrophotometers for measuring biomolecules?

Accepted Answer

Microvolume spectrophotometers use surface tension to hold samples, eliminating the need for traditional cuvette holders. They are optimal for measuring expensive, limited-volume samples such as proteins and nucleic acids. These instruments can determine protein concentration from absorbance at 280 nanometers based on aromatic amino acid content, and assess nucleic acid concentration and purity from absorbance readings at 260 nanometers.

Question 7

What precautions should be taken when operating a spectrophotometer?

Accepted Answer

Always wear appropriate gloves when handling biological or chemical solutions. Allow the instrument to warm up before use. Never leave the cuvette compartment door open, as UV radiation can damage eyes and skin. Before inserting the cuvette, wipe away fingerprints and spills from the outside. Allow samples to reach the appropriate temperature and mix gently to avoid introducing bubbles that could affect measurements.

מבוא לספקטרופוטומטר - חידון הערכה