Question 1

What is photolithography and why is it used in microfabrication?

Accepted Answer

Photolithography is a microfabrication technique that uses light to transfer precise patterns onto a substrate, typically a silicon wafer. It enables the fabrication of microscale structures essential for creating bio microelectromechanical devices and methods of synthesis. This process is widely used because it can pattern complex designs with high precision, making it ideal for miniaturized biomedical devices.

Question 2

What are the main steps in the photolithography process?

Accepted Answer

The photolithography process begins with substrate preparation and thermal oxidation to form a silicon dioxide layer. Photoresist is then spin-coated uniformly onto the substrate, exposed to UV light through a photomask, and developed to remove soluble regions. The exposed substrate is etched using reactive ion etching or wet-etch techniques, and finally the remaining photoresist is removed to reveal the patterned microstructure.

Question 3

How do positive and negative photoresists differ in photolithography?

Accepted Answer

Positive photoresist becomes soluble when exposed to UV light, allowing exposed regions to be removed during development. Negative photoresist behaves oppositely: exposed regions become cross-linked and insoluble, while unexposed areas dissolve during development. The choice between them depends on the desired pattern and application requirements.

Question 4

Why is a cleanroom environment necessary for photolithography?

Accepted Answer

A cleanroom is essential for photolithography because it routinely filters air to minimize dust contamination. Even microscopic particles can disrupt precise pattern transfer onto the substrate, compromising device quality and functionality. The controlled environment ensures consistent, high-fidelity microfabrication of BioMEM devices.

Question 5

What etching methods are used after photoresist development?

Accepted Answer

Two primary etching methods follow photoresist development: dry etching using reactive ion etching, which employs chemically reactive plasma to remove material, and wet-etch techniques such as hydrofluoric acid for etching silicon dioxide. The choice depends on the material being processed and desired pattern characteristics.

Question 6

How can photolithography be used to create metal patterns on substrates?

Accepted Answer

Metal patterns are created by depositing metal layers, such as chromium and gold, directly onto the photoresist pattern using sputter coating or metal evaporation. After deposition, the photoresist is removed to expose the metal patterns underneath. These metal structures can serve as electrodes for bioelectronics or guide controlled cell assembly on the substrate.

Question 7

What techniques extend photolithography capabilities beyond the microscale?

Accepted Answer

While photolithography is limited to microscale patterns, nanoscale fabrication can be achieved using focused ion beam (FIB) technology. FIB uses a beam of ions to precisely ablate or deposit materials on a surface, enabling creation of nanostructures like platinum bridges connecting gold electrodes. This extends microfabrication capabilities for advanced BioMEM device development.

מיקרו-פיבריות באמצעות פוטוליתוגרפיה

Browse More Videos