Name: aggregate grading for strong concrete mixes
Uploaded: 2024-11-07T14:48:25.000Z
Duration: 1 min 15 s
Channel: JoVE

骨材の等級付けは、骨材のサンプル内の粒度分布を示します。
適切に等級付けされた骨材には、ボイドが最小の高密度マトリックスを形成するために必要な比率で、必要なすべての骨材サイズ画分が含まれています。
対応するグラデーション曲線は連続した滑らかな曲線であり、幅広い粒子サイズを示しています。
骨材の大部分が特定のふるいを通過し、次に細かいふるいに保持される場合、粒子は主に同じサイズであることを意味します。
これは、均一または1サイズの傾斜した骨材を表し、グラデーション曲線上にほぼ垂直な線で描かれています。
骨材は、ほぼ同じ割合の骨材がサイズがかなり異なる2つの異なるふるいを通過する場合、中間サイズ範囲に骨材が存在しないことを示し、グラデーション曲線上の水平線で表される場合、ギャップグレーディングされます。
細骨材がない場合、混合物はオープングレードと呼ばれ、粗い粒子の間に大きな空隙が生じます。対応するグラデーション曲線は平坦で、小さいサイズ範囲ではほぼゼロです。

骨材の粒度分類の種類

骨材の粒度分類は、十分な強度、適度な作業性、および分離が最小限のコンクリート混合物を経済的に得るために重要です。骨材の粒度分類には、よく粒度分類された骨材、均一に粒度分類された骨材 (または 1 つのサイズ)、ギャップ粒度分類された骨材、およびオープン粒度の 4 つの種類があります。


 よく粒度分類された骨材には、必要なサイズ分画がすべて含まれており、滑らかで連続した粒度分布曲線で表される、最小限の空隙を持つ高密度マトリックスを形成します。このタイプの粒度分類により、コンクリートの作業性と安定性が確保されます。


 対照的に、1 つのサイズまたは均一に粒度分類された骨材は、ほぼ垂直な粒度分布曲線から明らかなように、主に同じサイズの粒子で構成されています。これらの骨材は透過性に優れていますが、安定性に欠け、通常は舗装のチップシールなどの特定の用途に使用されます。


 ギャップ粒度分類された骨材は、特定のサイズ分画が存在しないという特徴があり、粒子の大部分が 2 つの大きく異なるふるいを通過します。その結果、中間サイズが欠落していることを示す、ほぼ水平の箇所を持つ粒度曲線が生まれます。材料サイズが欠落しているため、これらの骨材はコンクリートの安定性に問題を引き起こす可能性があります。


 オープン粒度骨材は、大きな骨材間の隙間を埋める小さな骨材が欠落しているため、小さいサイズの箇所で最小値を持つ平坦な粒度曲線を示します。これらの骨材は透水性が高いですが、安定性が低下します。


 <img alt="Figure1" src="/files/ftp_upload/16873/16873_Figure%201.jpg">

骨材の等級付けは、骨材のサンプル内の粒度分布を示します。
適切に等級付けされた骨材には、必要なすべての骨材サイズが含まれています...

Education

JoVE Core

Civil Engineering

土木工学

Unit 1

ユニット1

Aggregates and Water

骨材および水

KEY TERMS AND CONCEPTS

主要用語と概念

Types of Aggregate Grading

aggregate grading for strong concrete mixes

Aggregate grading describes the particle size distribution in a sample of aggregate. It is important for making a concrete mix that has enough strength, reasonable workability, and minimal segregation. The right grading also helps concrete stay economical.

There are four main types of aggregate gradation: well-graded, uniformly graded, gap-graded, and open-graded. Each type has a different pattern on a gradation curve, which shows how particle sizes are spread across sieve sizes. These patterns help explain how the aggregate will behave in concrete or other uses.

Well-graded aggregate contains a full range of particle sizes. The sizes fit together to form a dense matrix with minimal voids, and the gradation curve is smooth and continuous. This type of grading gives good workability and stability.

Uniformly graded, or one-sized, aggregate is made mostly of particles of the same size. Its gradation curve is nearly vertical. This type allows good permeability, but it does not provide much stability. It is used in specific applications such as chip seals in pavements.

Gap-graded aggregate is missing certain size fractions. As a result, a large amount of material may pass through two very different sieves, and the gradation curve shows a nearly horizontal section where sizes are missing. Because intermediate sizes are absent, this type can create stability problems in concrete.

Open-graded aggregate is missing the smaller sizes that would fill the spaces between larger particles. Its gradation curve is flat and shows very low values in the small size range. Open-graded aggregate is highly permeable, but it has reduced stability.

Aggregate Grading for Strong Concrete Mixes

aggregate-grading-for-strong-concrete-mixes

unsoundness of aggregate due to volume change

unsoundness-of-aggregate-due-to-volume-change

Aggregate Durability in Freeze-Thaw Cycles

Aggregate durability can decline when volume changes damage the particles. Freezing and thawing, thermal change, and wetting and drying all place stress on aggregates. When unsound aggregates break down under these conditions, they can contribute to scaling, pop-outs, and cracking in concrete. Some aggregates are more vulnerable than others. Porous flints, cherts, and aggregates that contain clay minerals are especially prone to this kind of damage. Their internal structure can make them...

deleterious substances in aggregate

Testing Aggregate Impurities in Concrete

Aggregate impurities can lower the quality and durability of concrete. Organic matter, such as loam in sand, can interfere with cement hydration and weaken the bond between the aggregate and the cement paste. Organic impurities are often checked with a colorimetric test. In this test, the darkness of the solution after agitation shows the level of organic content. Clay and fine material can also coat aggregate particles and reduce the bond with the cement paste. The amount of clay and silt in...

sieve analysis and grading curves

Aggregate Size Testing with Sieve Grading

Aggregate size testing with sieve grading measures the particle size distribution of aggregate materials. It starts with a dried sample of aggregate that is weighed first. The sample is then sorted through a stack of square-opening sieves arranged from largest opening on top to smallest opening below. The sieve stack is shaken or vibrated so the particles move through the openings by size. After a set time, the material left on each sieve is weighed. That weight is then written as a percentage...

fineness modulus

Fineness Modulus from Sieve Analysis

Fineness modulus is a numerical index used to describe how coarse or fine aggregate particles are. For sand, it is found from sieve analysis using a standard set of ASTM sieves. The result helps show whether the sample is finer or more coarse. To calculate fineness modulus, first record the weight of aggregate retained on each sieve and in the pan at the bottom. Then find the cumulative weight retained on each sieve. Next, express each cumulative weight as a percentage of the total sample...

types of aggregate grading

Aggregate grading describes the particle size distribution in a sample of aggregate. It is important for making a concrete mix that has enough strength, reasonable workability, and minimal segregation. The right grading also helps concrete stay economical. There are four main types of aggregate gradation: well-graded, uniformly graded, gap-graded, and open-graded. Each type has a different pattern on a gradation curve, which shows how particle sizes are spread across sieve sizes. These...

maximum size of aggregate

How Aggregate Size Affects Concrete Mix

Aggregate size affects how concrete is mixed, placed, and strengthened. The maximum size of aggregate is defined by the sieve aperture that retains 15 percent or more of the particles in the sample. This size choice helps determine the concrete’s water demand, workability, and final strength. Larger aggregate particles reduce the surface area that must be covered by cement paste. As a result, they can lower the water needed in the mix. When the desired workability and richness are kept, this...

quality of water

Water Standards for Concrete Mixing

Water standards for concrete mixing help control strength and durability. Potable water is usually preferred. Even so, it should not contain too much sodium or potassium, because these salts can weaken concrete integrity. Water quality is judged by impurities such as dissolved solids, chlorides, and sulfates. The pH value is ideally between 6 and 8. Slightly acidic natural water may still be acceptable if it does not contain harmful organic matter or algae. Limits for these impurities depend...

testing water quality

Water Tests for Concrete Performance

Water tests for concrete performance help determine whether an uncertain water source is safe to use in cement and mortar. The main checks compare the water against de-ionized or distilled water benchmarks. Engineers look at both setting time and the compressive strength of mortar made with the test water. Standards set clear limits for these results. ASTM C1602 requires setting times to stay within 90 minutes of the control. BS 3146:1980 allows a 30-minute change in initial setting, while BS...

aggregates classification

Aggregate Types by Size, Weight, and Source

Aggregate types are grouped by size, petrographic characteristics, weight, and source. These categories help describe how different aggregates are identified and used in concrete. Size is one of the most common ways to classify them. Based on particle size, aggregates are either coarse or fine. Coarse aggregates are particles that do not pass through ASTM sieve No. 4. Fine aggregates are the particles that do pass through that sieve. Petrographic classification looks at shared mineral features.

shape and texture of coarse aggregate

How Aggregate Form Changes Concrete

Aggregate form affects how concrete mixes, packs, and bonds. Coarse aggregate is classified by the sharpness or roundness of its edges and corners. The main shapes are rounded, angular, elongated, and flaky. These shapes help show how the particles will behave in concrete. Rounded aggregates are fully shaped by attrition, which means they have been worn down by rubbing and impact. River gravel and seashore gravel are common examples. Angular aggregates, such as crushed rock, have clear edges...

bonding and strength of aggregate

How Aggregate Shape Affects Concrete Bond

Aggregate shape and surface texture affect how well concrete holds together. Rough, angular aggregates usually bond more strongly with the cement matrix than smooth, rounded ones. This stronger adhesion can help produce high-strength concrete. Angular aggregates also have a larger surface area. That gives the cement paste more area to grip, which improves the bond. Bond quality is hard to measure directly, and there is no single test that is accepted everywhere. A broken concrete sample can...

toughness and hardness of aggregate

Testing Aggregate Impact and Abrasion

Aggregate toughness and hardness are important for concrete used on pavement surfaces and industrial floors that must carry heavy loads. Toughness means an aggregate can resist failure from impact. Hardness means it can resist wear.

specific gravity of aggregate

Aggregate Pore Effects on Specific Gravity

Aggregate specific gravity depends on the pores inside the material. These pores may be permeable or impermeable, so the same aggregate can be described in more than one way. For this reason, specific gravity is grouped into bulk or gross specific gravity, apparent specific gravity, and absolute specific gravity. Bulk or gross specific gravity uses the mass of aggregate in the saturated surface-dry state. It is compared with the total volume of the aggregate, including both the solids and the...

bulk density of aggregate

How Aggregate Size Affects Bulk Density

Bulk density describes the mass of aggregate that fills a unit volume, including the empty spaces between particles. Those void spaces remain because aggregate particles cannot be packed so tightly that every gap disappears. In practice, bulk refers to the total volume of both the particles and the spaces around them. This measurement matters when aggregates are batched by volume. It also helps convert materials measured by mass into a volume-based quantity. Natural mineral aggregates such as...

porosity and absorption of aggregate

Aggregate Pore States and Water Uptake

Aggregate contains pores of different sizes, and those pores may be sealed inside the particle or open to the surface. Open pores let water enter the aggregate. Because aggregate makes up about three-quarters of concrete by volume, its porosity strongly affects the porosity of the finished concrete. Aggregate can also be described by its moisture state. When water fills every pore, the material is saturated and surface-dry. If it sits in dry air, some water evaporates and the aggregate becomes...

moisture content and bulking of aggregate

moisture-content-and-bulking-of-aggregate

How Aggregate Moisture Affects Concrete Mixes

Aggregate moisture affects concrete mixing by changing how much water must be added to the batch. Moisture content is the water coating the outside of aggregate that is in a saturated and surface-dry state. The total water in moist aggregate includes both moisture content and water absorption. When aggregates sit in stockpiles or are exposed to rain, they can take in moisture. That extra water must be counted during concrete batching so the water-to-cement ratio stays correct. The moisture...

key terms and concepts

Learn how well-graded, uniform, gap-graded, and open-graded aggregates affect concrete strength, workability, permeability, and stability.

Aggregate Grading for Strong Concrete Mixes | JoVE K12

JoVE Core Civil Engineering provides a foundational exploration of essential construction materials in civil engineering, focusing on bricks, stones, steel, wood, and concrete through easy-to-understand animated videos. This collection covers the properties, manufacturing processes, and practical applications of these materials. Additionally, the accompanied science-in-action videos demonstrate the research experiments performed in laboratories.

civil engineering

Aggregate Grading for Strong Concrete Mixes

Description

Transcript