Name: induced current from changing magnetic flux
Uploaded: 2023-04-30T12:42:51.000Z
Duration: 1 min 22 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Physical Science

motion-and-stability-forces-and-interactions

Motion and Stability- Forces and Interactions

PS.PSc.6.5

Motional Emf

화면 평면을 가리키는 자기장 B에서 일정한 속도 v로 움직이는 길이 L의 전도 막대를 고려하십시오.
전도성 막대 내의 양전하에 작용하는 자기력은 위쪽을 향하여 막대의 양쪽 끝에 반대 전하가 축적됩니다. 이것은 아래쪽 방향으로 전기장을 생성합니다.
전기력이 자기력의 균형을 맞출 수 있을 만큼 충분히 클 때까지 전하가 계속 누적됩니다. 막대를 가로지르는 전위차는 막대가 움직이는 한 존재합니다.
이 로드가 고정된 U자형 도체와 함께 닫힌 전도 루프를 형성하면 로드의 자유 전하가 루프를 따라 재분배됩니다. 이것은 폐쇄 루프에서 전류를 생성하고 움직이는 막대는 운동 기전력으로 알려진 운동 기전력을 생성합니다.
여기서 폐쇄 루프를 통과하는 자속은 자기장에 루프 면적을 곱한 값과 같습니다. 패러데이의 법칙에 따르면 자속의 변화율은 운동 emf의 크기와 같습니다.

<ol>
	<li>Young, H.D 및 Freedman, RA (2012). 현대 물리학을 가진 대학 물리학. 샌프란시스코, 캘리포니아 : 피어슨. 섹션 29.4, 969-970페이지.</li>
	<li>오픈스택스. (2019). 대학 물리학 Vol. 2. [웹 버전]. 섹션 13.1, 591-592페이지. 원본 주소 <a href="https://openstax.org/books/university-physics-volume-2/pages/13-3-motional-emf">https://openstax.org/books/university-physics-volume-2/pages/13-3-motional-emf</a></li>
</ol>

모션 emf

자속은 세 가지 요소, 즉 자기장의 강도, 자기력선이 통과하는 면적, 표면적에 대한 자기장의 방향에 따라 달라집니다. 이 양 중 하나라도 변하면 그에 따른 자속 변화가 발생합니다. 자기력선이 통과하는 영역이 변하면 자속도 변합니다. 영역의 이러한 변화는 두 가지 유형일 수 있습니다. 직사각형 루프를 통한 자속은 자기장으로 이동함에 따라 증가하거나 회전 코일을 통한 자속은 변경됩니다.

도체 막대가 막대의 움직임에 수직인 자기장을 통해 이동하면 막대에 EMF가 유도됩니다. 이 유도 EMF는 전도성 막대가 U자형 도체로 닫힌 전도성 루프를 형성할 때 유도 전류를 생성합니다. 유도된 EMF의 크기와 방향은 패러데이의 법칙과 렌츠의 법칙을 사용하여 결정할 수 있습니다. 이러한 시스템에서 에너지 보존을 위해서는 막대의 움직임으로 인해 전달되는 전력과 유도 전류로 인해 소실되는 전력이 동일해야 합니다.

이 원리는 레일건의 작동에서도 볼 수 있습니다. 레일건에서는 전도성 막대가 발사체나 무기로 교체되어 발사됩니다. 이러한 유형의 총에서 자기장의 최적 차단/감속은 레일 사이의 자속을 감소시켜 발사체를 고정하는 막대에 전류가 흐르게 합니다. 전기자를 통한 이 전류는 자기력을 경험하여 앞으로 추진됩니다. 그러나 레일건은 높은 생산 비용과 높은 전류로 인해 군에서 널리 사용되지 않습니다.

모션 EMF

자속은 세 가지 요인에 따라 달라집니다 : 자기장의 강도, 자기장 선이 통과하는 영역, 자기장의 방향 ...

Education

교육

JoVE Core

Physics

물리학

Unit 1

제1단원

Electromagnetic Induction

전자기 유도

KEY TERMS AND CONCEPTS

주요 용어 및 개념

induced current from changing magnetic flux

Induced current from changing magnetic flux depends on how a magnetic field interacts with an area. Magnetic flux changes when the field strength changes, when the area it passes through changes, or when the field turns relative to the surface. When any of these factors vary, the magnetic flux also varies.

A change in area can happen in two common ways. The flux through a rectangular loop increases as the loop moves into a magnetic field. The magnetic flux through a rotating coil also changes as the coil turns. These changes can create an emf, or electromotive force, in a conductor.

If a conducting rod moves through a magnetic field and its motion is perpendicular to the rod, an emf is induced in the rod. That induced emf can produce an induced current when the rod is part of a closed loop with a U-shaped conductor. Faraday's law and Lenz's law are used to determine the size and direction of the induced emf.

These systems also show conservation of energy. The power from the rod's motion equals the power lost as heat from the induced current. The same idea appears in a rail gun, where the conducting rod is replaced by a projectile or weapon. When the magnetic field is shut off or ramped down, the flux between the rails decreases, current flows in the rod holding the projectile, and the armature feels a magnetic force that pushes it forward. Rail guns are not widely used in the military because they are expensive to build and require very high currents.

Induced Current from Changing Magnetic Flux

induced-current-from-changing-magnetic-flux

induction

Magnetic Flux and Induced Current

Magnetic flux and induced current are linked when a magnetic field changes near a coil. Moving a bar magnet into or out of a coil induces an emf, which is an electromotive force. If the motion goes in the opposite direction, the emf has the opposite sign. Reversing the magnet poles also reverses the direction of the induced emf. The same effect appears when the coil moves instead of the magnet. Relative motion is what matters. A faster motion produces a larger emf. If the magnet and coil stay...

ampere-maxwell's law: problem-solving

Displacement Current in an RC Circuit

Displacement current in an RC circuit can be found by tracking the charging capacitor. A parallel-plate capacitor with capacitance C, plate area A, and plate separation d is connected to a resistor R and a battery of voltage V. When the current starts to flow at t = 0, the charge and voltage on the capacitor change with time. The first step is to use the RC-circuit result for the capacitor voltage at time t. With the z-axis pointing from the positive plate to the negative plate, the electric...

differential form of maxwell's equations

Maxwell’s Equations at a Point

Maxwell’s equations at a point describe how electric and magnetic fields change in space and time. They connect field behavior to charge and current density at a single location. This point-by-point form is useful when studying electromagnetic fields in detail. James Clerk Maxwell was a major physicist of the nineteenth century. He combined earlier laws of electricity and magnetism into one electromagnetic theory. The basic experimental laws came from scientists such as Oersted, Coulomb,...

dc generator

How a DC Generator Makes Current

A DC generator makes electrical energy from mechanical motion. It produces DC pulses with the same polarity, unlike an alternator, which gives sinusoidal AC current. The two machines have similar construction, but a DC generator uses a single split ring instead of a pair of slip rings. That split ring is called a commutator. It works like a rotary switch that changes the contact with the brushes after each half turn of the conducting loop. This action keeps the induced emf at the same...

magnetic damping

Eddy Currents and Magnetic Braking

Eddy currents can create strong drag on moving objects. This drag is called magnetic damping. A metallic pendulum bob swinging between the poles of a strong magnet feels this force as it enters and leaves the field, so its motion dies out quickly. The effect is much smaller for a slotted metal plate. As the plate enters the magnetic field, a changing flux induces an emf, or electromotive force. The slots limit the size of the current loops, and nearby loops can carry currents in opposite...

superconductor

Superconductor Critical Temperature

Superconductivity is the state in which a material has no electrical resistance and magnetic fields cannot penetrate it. A material that reaches this state is called a superconductor. The key idea in the transcript is the critical temperature, which is the temperature at which the change happens. Heike Kamerlingh Onnes of Leiden University first observed this behavior in mercury in 1911. He cooled a mercury sample in liquid helium to study how resistance changed with temperature. As the...

types of superconductors

Superconductors and Magnetic Levitation

Superconductors are materials that can carry electric current with zero resistance when they are cooled below a critical temperature. At this point, they also show the Meissner effect, which means they push magnetic fields out of their interior. A light permanent magnet can then levitate in a stable position above the superconducting sample. This magnetic levitation has real uses. High-speed trains have been built with strong superconducting magnets so they can float above the track and avoid...

faraday's law

Magnetic Flux and Induced Emf

Faraday’s law connects magnetic flux changes to induced emf, or voltage. A change in the magnetic field or in the coil’s orientation with respect to the field can produce this voltage. Magnetic flux describes how many magnetic field lines pass through a given surface area.

lenz's law

Magnet Motion and Induced Current

Magnet motion and induced current are linked by Lenz’s law. The law says that the induced emf, or electromotive force, drives current around a wire loop in a direction that opposes the change in magnetic flux that caused it. A moving bar magnet can create this effect in a coil. If the magnet moves toward the coil, the magnetic flux increases and an induced current appears. That current produces a magnetic field that pushes against the stronger field from the magnet. The same idea works in...

motional emf

Induced current from changing magnetic flux depends on how a magnetic field interacts with an area. Magnetic flux changes when the field strength changes, when the area it passes through changes, or when the field turns relative to the surface. When any of these factors vary, the magnetic flux also varies. A change in area can happen in two common ways. The flux through a rectangular loop increases as the loop moves into a magnetic field. The magnetic flux through a rotating coil also changes...

faraday disk dynamo

Faraday Disk Dynamo and DC Output

A Faraday disk dynamo is a DC generator that produces an emf constant in time. It uses a conducting disk that spins at constant angular velocity in a magnetic field. The magnetic field is perpendicular to the plane of the disk. As the disk rotates, the magnetic flux changes and an emf is induced. This causes opposite charges to build up at the rim and at the center of the disk. The direction of the induced emf depends on the direction of the magnetic field and the direction of rotation. If...

induced electric fields

Faraday’s Law and Induced EMF

Faraday’s law explains how a changing magnetic flux can create an induced emf in a circuit. When current is induced, work is being done on the conduction electrons in the wire. That work must come from a source, and the source is not a battery or a magnetic field. A battery does not have to be present in a circuit for current to be induced. Magnetic fields also do not do work on moving charges. Instead, the change in magnetic flux produces an electric field in the wire. This is called an...

induced electric fields: applications

Electric Fields from Changing Magnetism

An electric field can be induced by a changing magnetic field. This induced electric field is nonconservative, which means it does not do net work when a charge moves around a closed path. That behavior is different from an electrostatic field, which comes from a fixed charge distribution. An electrostatic field is conservative, so it does no net work over a closed path. Because of this difference, electric potential can be linked to the electrostatic field, but not to the induced field. When...

eddy currents

Eddy Currents in Recycling, Brakes, and Heat

Eddy currents affect how metals move, stop, and heat up. They form only in conductors, so they are useful for separating metals from nonmetals and for other practical devices. In recycling centers, trash can be sent down a ramp under a strong magnet. Metals in the trash slow down because eddy currents resist their motion. Nonmetals keep moving, so the materials separate. This method works for metals in general, not only ferromagnetic ones. Eddy currents also help in metal detectors. A...

displacement current

Maxwell’s Fix for Changing Currents

Maxwell’s correction to Ampère’s law explains how changing electric fields can create magnetic fields. The key idea is the displacement current, Id, which Maxwell added to the real conduction current, I. This extra term helps the law work when current is not steady. The displacement current is defined using the permittivity of free space, ε0, and the electric flux, ΦE. It is not a real flow of charge. Instead, it is an added term in Maxwell’s equations that acts like current in Ampère’s law. <br...

significance of displacement current

Maxwell’s Fix for Charging Capacitors

Maxwell’s fix for a charging capacitor is the displacement current in Ampère’s law. A displacement current is not a flow of charge like conduction current. It comes from a changing electric field. That is why it is defined using a time-varying electric field and has its own displacement current density. Maxwell added this term to the original Ampère’s law. The result is called generalized Ampère’s law. The added displacement current term lets the law work in regions where no charges are moving.

electromagnetic fields

Electric and Magnetic Fields in Motion

Electric and magnetic fields can come from different sources, but they can act in surprisingly similar ways. Static charges create electrostatic fields. These fields are conservative, which means a test charge does no net work after moving around a complete loop. Fields made by changing magnetic fields behave differently. They are not conservative, and they do net work on a charge. That work is proportional to how fast the magnetic flux changes. These fields also do not follow Gauss’s law for...

maxwell's equation of electromagnetism

Maxwell's Equations and Light Waves

Maxwell's equations bring electricity, magnetism, and light together in one electromagnetic theory. James Clerk Maxwell was a major nineteenth-century physicist, and his work helped shape modern physics. He also made important contributions to the kinetic theory of gases, color vision, and the study of Saturn's rings. Maxwell built on earlier experiments in electricity and magnetism from Oersted, Coulomb, Gauss, and Faraday. These physicists had discovered the basic laws separately. Maxwell...

symmetry in maxwell's equations

Electric and Magnetic Field Symmetry

Electric and magnetic field symmetry is a key part of Maxwell's equations. After the fields are calculated with Maxwell's four equations, the Lorentz force equation gives the force those fields exert on a charged particle moving at a certain velocity. The Lorentz force law combines the effect of the electric field and the magnetic field on the moving charge. Maxwell's equations and the Lorentz force law together describe electricity and magnetism. The symmetry in Maxwell's framework is easier...

electric generator: alternator

How Alternators Produce AC Power

Alternators produce alternating current by rotating a conducting loop in a magnetic field. As the loop turns inside the field, the magnetic flux through the coil changes with time. That changing flux induces an emf, or electric voltage, in the circuit. A simple alternator uses a loop placed in a uniform magnetic field. The loop connects to split rings, and brushes carry the current to the external circuit. As the loop rotates, the magnetic flux changes sinusoidally, so the induced emf also...

back emf

Motor Current and Speed Changes

Motor current and speed changes are linked by back emf in an electric motor. A motor sends current through a wire loop in a magnetic field. The magnetic field pushes on the loop and creates torque, which turns a shaft and does mechanical work. As the coil turns, the magnetic flux through it changes. That changing flux induces an emf, or voltage, by Faraday’s law. The motor then acts like a generator whenever its coil rotates, whether the shaft is turned by an external drive or by the motor...

key terms and concepts

Explore how changing magnetic flux creates induced emf and current in loops, rods, and rail guns, using Faraday's law, Lenz's law, and energy conservation.

Induced Current from Changing Magnetic Flux | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

PS.Phy.5.2

Tennessee Academic Standards

High School

Energy

PHYS.PS3.9

Virginia  Standards of Learning

HIgh School

PS.9

PS.9.e

Minnesota Academic Standards in Science

1.2.1 9C.4.2.1.1

Alabama Course of Study Science

waves-and-their-applications-in-technologies-for-information-transfer

Waves and Their Applications in Technologies for Information Transfer

9-12.PS.2.3

9-12.PS.2.3.e

Florida Department of Education

SC.912.P.10

SC.912.P.10.16

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

P-PS3-5

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Forces and Interactions

HS-PS2-5.

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Instantaneous Velocity - I

The average velocity during a time interval cannot tell us how fast or in what direction a particle is moving at any given time during the interval. To ...

Instantaneous Velocity - II

Instantaneous velocity is the quantity that measures how fast an object is moving along its path. In other words, the instantaneous velocity of an object ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

Position and Displacement Vectors

To describe the motion of an object, one should first be able to describe its position (where it is at any particular time). More precisely, the position ...

average-and-instantaneous-velocity-vectors

Average and Instantaneous Velocity Vectors

To calculate other physical quantities in kinematics, the time variable must be introduced. The time variable not only allows us to state where an object ...

Acceleration Vectors

In everyday conversation, accelerating means speeding up. Acceleration is a vector in the same direction as the change in velocity, &#916;v, therefore the ...

Direction of Acceleration Vectors

Acceleration occurs when velocity changes in magnitude (an increase or decrease in speed), direction, or both. Although acceleration is in the direction ...

Linear Momentum

The term momentum is used in various ways in everyday language, most of which are consistent with the precise scientific definition. Generally, momentum ...

Force and Momentum

Force and momentum are intimately related. Force acting over time can change momentum, and Newton&#39;s second law of motion can be stated in its most ...

Analyze and interpret data to explain the motion of an object moving with a constant velocity or that is accelerating.

PS.PSc.4.1

Electrical Current

Electrical current is defined as the rate at which charge flows. When there is a large current present, such as that used to run a refrigerator, a large ...

Drift Velocity

The high speed of electrical signals results from the fact that the force between charges acts rapidly at a distance. Thus, when a free charge is forced ...

Current Density

The total amount of current flowing through one unit value of a cross-sectional area is referred to as current density. If the current flow is uniform, ...

Resistivity

When a voltage is applied to a conductor, an electrical field is generated, and charges in the conductor feel the force due to the electrical field. The ...

Resistance

When a current moves through any conductor, the conductor causes some level of difficulty for the current to flow. The measure of that difficulty is known ...

Ohm's Law

Many materials exhibit a simple relationship between the values of current, voltage, and resistance, known as Ohm&#8217;s law. The current that flows ...

Non-ohmic Devices

In most substances, the current flow is proportional to the voltage applied to it. A simple relationship between the values of current, voltage, and ...

Construct an explanation to compare simple series and parallel circuits in terms of Ohm's Law.

PS.PSc.6.2

Continuity Equation

The total amount of current flowing per unit cross-sectional area is called the current density. Hence, the current passing through a cross-sectional area ...

Boundary Conditions for Current Density

Current density becomes discontinuous across an interface of materials with different electrical conductivities. The normal component of the current ...

Electrical Conductivity

In perfect conductors, the electric field inside is always zero due to the abundance of free electrons, which nullify any field by flowing. As a result, ...

Theory of Metallic Conduction

The conduction of free electrons inside a conductor is best described by quantum mechanics. However, a classical model makes predictions close to the ...

Obtain, evaluate, and communicate information to explain how current is affected by changes in composition, length, temperature, and diameter of wire.

PS.PSc.6.3

Magnetism

Magnets are commonly found in everyday objects, such as toys, hangers, elevators, doorbells, and computer devices. Experimentation on these magnets shows ...

Magnetic Fields

A moving charge or a current creates a magnetic field in the surrounding space, in addition to its electric field. The magnetic field exerts a force on ...

Magnetic Field Lines

The representation of magnetic fields by magnetic field lines is very useful in visualizing the strength and direction of the magnetic field. Each of the ...

Magnetic Flux

The magnetic flux measures the number of magnetic field lines passing through a given surface area. The SI unit for magnetic flux is the weber (Wb). ...

motion-of-a-charged-particle-in-a-magnetic-field

Motion Of A Charged Particle In A Magnetic Field

A charged particle experiences a force when moving through a magnetic field. Consider the field to be uniform and the charged particle to move ...

Magnetic Force

In addition to the electric forces between electric charges, moving electric charges exert magnetic forces on each other. A magnetic field is created by a ...

magnetic-force-on-a-current-carrying-conductor

Magnetic Force On A Current-Carrying Conductor

Moving charges experience a force in a magnetic field. Since the magnetic fields produced by moving charges are proportional to the current, a conductor ...

magnetic-force-on-current-carrying-wires-example

Magnetic Force On Current-Carrying Wires: Example

In a magnetic field, moving charges encounter a force. If a wire contains these moving charges, i.e., if the wire is carrying a current, then a force acts ...

force-on-a-current-loop-in-a-magnetic-field

Force On A Current Loop In A Magnetic Field

Magnetic forces on wires carrying current are most frequently applied in motors. A DC motor is a device that converts electrical energy into mechanical ...

torque-on-a-current-loop-in-a-magnetic-field

Torque On A Current Loop In A Magnetic Field

The most common application of magnetic force on current-carrying wires is in electric motors. These consist of loops of wire, which are placed between ...

Use models to explain magnetism in terms of domains, interactions of poles, and magnetic fields.

PS.PSc.6.4

Analyze motion in terms of speed, velocity, acceleration, and momentum.

Induced Current from Changing Magnetic Flux

Description

Transcript

More videos by Standards