Name: eddy currents and magnetic braking
Uploaded: 2023-09-18T17:11:20.000Z
Duration: 1 min 17 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Physics

motion-and-stability-forces-and-interactions

Motion and Stability- Forces and Interactions

PS.Phy.5.2

Magnetic Damping

Consider a metallic plate fixed to one end swinging freely about its mean position, placed between two electromagnets.
When there is no magnetic field, the plate keeps oscillating. Once the electromagnets are turned on, the plate slows down and stops quickly.
This reduction in motion without any physical contact is called magnetic damping, caused by the opposing nature of eddy currents.
Now swing the plate again to understand this mechanism.
When the plate enters the magnetic field, the magnetic flux on the plate changes.
As per Faraday&#39;s law, eddy currents are induced in the plate, and according to Lenz&#39;s law, their direction is anticlockwise. So, the plate experiences a magnetic force that opposes its motion.
Similarly, when the plate goes out of the magnetic field, magnetic flux decreases, and eddy currents are induced in the clockwise direction.
As a result, the plate again experiences a magnetic force that opposes its exit from the magnetic field.
So, as a combined effect, the oscillations of the metallic plate are quickly damped.

magnetic damping

Eddy currents can produce significant drag on motion, called magnetic damping. For instance, when a metallic pendulum bob swings between the poles of a strong magnet, significant drag acts on the bob as it enters and leaves the field, quickly damping the motion.
If, however, the bob is a slotted metal plate, the magnet produces a much smaller effect. When a slotted metal plate enters the field, an emf is induced by the change in flux; however, it is less effective because the slots limit the size of the current loops. Moreover, adjacent loops have currents in opposite directions, and their effects cancel. When an insulating material is used, the eddy current is extremely small, so magnetic damping on insulators is negligible. If eddy currents are to be avoided in conductors, they must be slotted or constructed of thin layers of conducting material separated by insulating sheets.
Magnetic damping is used in sensitive laboratory balances. To have maximum sensitivity and accuracy, the balance must be as friction-free as possible. If it is friction-free, it oscillates for a very long time. Magnetic damping is a simple and ideal solution. With magnetic damping, the drag is proportional to the speed and becomes zero at zero velocity. Thus, the oscillations are quickly damped, after which the damping force disappears, allowing the balance to be very sensitive. In most balances, magnetic damping is accomplished with a conducting disc that rotates in a fixed field.

Eddy currents can produce significant drag on motion, called magnetic damping. For instance, when a metallic pendulum bob swings between the poles of a ...

Education

JoVE Core

Unit 1

Electromagnetic Induction

KEY TERMS AND CONCEPTS

eddy currents and magnetic braking

Eddy currents can create strong drag on moving objects. This drag is called magnetic damping. A metallic pendulum bob swinging between the poles of a strong magnet feels this force as it enters and leaves the field, so its motion dies out quickly.

The effect is much smaller for a slotted metal plate. As the plate enters the magnetic field, a changing flux induces an emf, or electromotive force. The slots limit the size of the current loops, and nearby loops can carry currents in opposite directions, so their effects cancel.

Insulating materials behave differently. Their eddy currents are extremely small, so magnetic damping on insulators is negligible. If eddy currents must be reduced in conductors, the material can be slotted or made from thin conducting layers separated by insulating sheets.

Magnetic damping is useful in sensitive laboratory balances. These balances need to be as friction-free as possible for maximum sensitivity and accuracy. A friction-free balance can oscillate for a long time, so magnetic damping provides a simple solution. The drag is proportional to speed and drops to zero when the object stops moving, which quickly calms the motion while keeping the balance sensitive. In most balances, this is done with a conducting disc rotating in a fixed magnetic field.

Eddy Currents and Magnetic Braking

induction

Magnetic Flux and Induced Current

Magnetic flux and induced current are linked when a magnetic field changes near a coil. Moving a bar magnet into or out of a coil induces an emf, which is an electromotive force. If the motion goes in the opposite direction, the emf has the opposite sign. Reversing the magnet poles also reverses the direction of the induced emf. The same effect appears when the coil moves instead of the magnet. Relative motion is what matters. A faster motion produces a larger emf. If the magnet and coil stay...

ampere-maxwell's law: problem-solving

Displacement Current in an RC Circuit

Displacement current in an RC circuit can be found by tracking the charging capacitor. A parallel-plate capacitor with capacitance C, plate area A, and plate separation d is connected to a resistor R and a battery of voltage V. When the current starts to flow at t = 0, the charge and voltage on the capacitor change with time. The first step is to use the RC-circuit result for the capacitor voltage at time t. With the z-axis pointing from the positive plate to the negative plate, the electric...

differential form of maxwell's equations

Maxwell’s Equations at a Point

Maxwell’s equations at a point describe how electric and magnetic fields change in space and time. They connect field behavior to charge and current density at a single location. This point-by-point form is useful when studying electromagnetic fields in detail. James Clerk Maxwell was a major physicist of the nineteenth century. He combined earlier laws of electricity and magnetism into one electromagnetic theory. The basic experimental laws came from scientists such as Oersted, Coulomb,...

dc generator

How a DC Generator Makes Current

A DC generator makes electrical energy from mechanical motion. It produces DC pulses with the same polarity, unlike an alternator, which gives sinusoidal AC current. The two machines have similar construction, but a DC generator uses a single split ring instead of a pair of slip rings. That split ring is called a commutator. It works like a rotary switch that changes the contact with the brushes after each half turn of the conducting loop. This action keeps the induced emf at the same...

Eddy currents can create strong drag on moving objects. This drag is called magnetic damping. A metallic pendulum bob swinging between the poles of a strong magnet feels this force as it enters and leaves the field, so its motion dies out quickly. The effect is much smaller for a slotted metal plate. As the plate enters the magnetic field, a changing flux induces an emf, or electromotive force. The slots limit the size of the current loops, and nearby loops can carry currents in opposite...

superconductor

Superconductor Critical Temperature

Superconductivity is the state in which a material has no electrical resistance and magnetic fields cannot penetrate it. A material that reaches this state is called a superconductor. The key idea in the transcript is the critical temperature, which is the temperature at which the change happens. Heike Kamerlingh Onnes of Leiden University first observed this behavior in mercury in 1911. He cooled a mercury sample in liquid helium to study how resistance changed with temperature. As the...

types of superconductors

Superconductors and Magnetic Levitation

Superconductors are materials that can carry electric current with zero resistance when they are cooled below a critical temperature. At this point, they also show the Meissner effect, which means they push magnetic fields out of their interior. A light permanent magnet can then levitate in a stable position above the superconducting sample. This magnetic levitation has real uses. High-speed trains have been built with strong superconducting magnets so they can float above the track and avoid...

faraday's law

Magnetic Flux and Induced Emf

Faraday’s law connects magnetic flux changes to induced emf, or voltage. A change in the magnetic field or in the coil’s orientation with respect to the field can produce this voltage. Magnetic flux describes how many magnetic field lines pass through a given surface area.

lenz's law

Magnet Motion and Induced Current

Magnet motion and induced current are linked by Lenz’s law. The law says that the induced emf, or electromotive force, drives current around a wire loop in a direction that opposes the change in magnetic flux that caused it. A moving bar magnet can create this effect in a coil. If the magnet moves toward the coil, the magnetic flux increases and an induced current appears. That current produces a magnetic field that pushes against the stronger field from the magnet. The same idea works in...

motional emf

Induced Current from Changing Magnetic Flux

Induced current from changing magnetic flux depends on how a magnetic field interacts with an area. Magnetic flux changes when the field strength changes, when the area it passes through changes, or when the field turns relative to the surface. When any of these factors vary, the magnetic flux also varies. A change in area can happen in two common ways. The flux through a rectangular loop increases as the loop moves into a magnetic field. The magnetic flux through a rotating coil also changes...

faraday disk dynamo

Faraday Disk Dynamo and DC Output

A Faraday disk dynamo is a DC generator that produces an emf constant in time. It uses a conducting disk that spins at constant angular velocity in a magnetic field. The magnetic field is perpendicular to the plane of the disk. As the disk rotates, the magnetic flux changes and an emf is induced. This causes opposite charges to build up at the rim and at the center of the disk. The direction of the induced emf depends on the direction of the magnetic field and the direction of rotation. If...

induced electric fields

Faraday’s Law and Induced EMF

Faraday’s law explains how a changing magnetic flux can create an induced emf in a circuit. When current is induced, work is being done on the conduction electrons in the wire. That work must come from a source, and the source is not a battery or a magnetic field. A battery does not have to be present in a circuit for current to be induced. Magnetic fields also do not do work on moving charges. Instead, the change in magnetic flux produces an electric field in the wire. This is called an...

induced electric fields: applications

Electric Fields from Changing Magnetism

An electric field can be induced by a changing magnetic field. This induced electric field is nonconservative, which means it does not do net work when a charge moves around a closed path. That behavior is different from an electrostatic field, which comes from a fixed charge distribution. An electrostatic field is conservative, so it does no net work over a closed path. Because of this difference, electric potential can be linked to the electrostatic field, but not to the induced field. When...

eddy currents

Eddy Currents in Recycling, Brakes, and Heat

Eddy currents affect how metals move, stop, and heat up. They form only in conductors, so they are useful for separating metals from nonmetals and for other practical devices. In recycling centers, trash can be sent down a ramp under a strong magnet. Metals in the trash slow down because eddy currents resist their motion. Nonmetals keep moving, so the materials separate. This method works for metals in general, not only ferromagnetic ones. Eddy currents also help in metal detectors. A...

displacement current

Maxwell’s Fix for Changing Currents

Maxwell’s correction to Ampère’s law explains how changing electric fields can create magnetic fields. The key idea is the displacement current, Id, which Maxwell added to the real conduction current, I. This extra term helps the law work when current is not steady. The displacement current is defined using the permittivity of free space, ε0, and the electric flux, ΦE. It is not a real flow of charge. Instead, it is an added term in Maxwell’s equations that acts like current in Ampère’s law. <br...

significance of displacement current

Maxwell’s Fix for Charging Capacitors

Maxwell’s fix for a charging capacitor is the displacement current in Ampère’s law. A displacement current is not a flow of charge like conduction current. It comes from a changing electric field. That is why it is defined using a time-varying electric field and has its own displacement current density. Maxwell added this term to the original Ampère’s law. The result is called generalized Ampère’s law. The added displacement current term lets the law work in regions where no charges are moving.

electromagnetic fields

Electric and Magnetic Fields in Motion

Electric and magnetic fields can come from different sources, but they can act in surprisingly similar ways. Static charges create electrostatic fields. These fields are conservative, which means a test charge does no net work after moving around a complete loop. Fields made by changing magnetic fields behave differently. They are not conservative, and they do net work on a charge. That work is proportional to how fast the magnetic flux changes. These fields also do not follow Gauss’s law for...

maxwell's equation of electromagnetism

Maxwell's Equations and Light Waves

Maxwell's equations bring electricity, magnetism, and light together in one electromagnetic theory. James Clerk Maxwell was a major nineteenth-century physicist, and his work helped shape modern physics. He also made important contributions to the kinetic theory of gases, color vision, and the study of Saturn's rings. Maxwell built on earlier experiments in electricity and magnetism from Oersted, Coulomb, Gauss, and Faraday. These physicists had discovered the basic laws separately. Maxwell...

symmetry in maxwell's equations

Electric and Magnetic Field Symmetry

Electric and magnetic field symmetry is a key part of Maxwell's equations. After the fields are calculated with Maxwell's four equations, the Lorentz force equation gives the force those fields exert on a charged particle moving at a certain velocity. The Lorentz force law combines the effect of the electric field and the magnetic field on the moving charge. Maxwell's equations and the Lorentz force law together describe electricity and magnetism. The symmetry in Maxwell's framework is easier...

electric generator: alternator

How Alternators Produce AC Power

Alternators produce alternating current by rotating a conducting loop in a magnetic field. As the loop turns inside the field, the magnetic flux through the coil changes with time. That changing flux induces an emf, or electric voltage, in the circuit. A simple alternator uses a loop placed in a uniform magnetic field. The loop connects to split rings, and brushes carry the current to the external circuit. As the loop rotates, the magnetic flux changes sinusoidally, so the induced emf also...

back emf

Motor Current and Speed Changes

Motor current and speed changes are linked by back emf in an electric motor. A motor sends current through a wire loop in a magnetic field. The magnetic field pushes on the loop and creates torque, which turns a shaft and does mechanical work. As the coil turns, the magnetic flux through it changes. That changing flux induces an emf, or voltage, by Faraday’s law. The motor then acts like a generator whenever its coil rotates, whether the shaft is turned by an external drive or by the motor...

key terms and concepts

Learn how eddy currents create magnetic damping, why slotted plates reduce the effect, and how balances use it to improve sensitivity and accuracy.

Eddy Currents and Magnetic Braking | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Instantaneous Velocity - I

The average velocity during a time interval cannot tell us how fast or in what direction a particle is moving at any given time during the interval. To ...

Instantaneous Velocity - II

Instantaneous velocity is the quantity that measures how fast an object is moving along its path. In other words, the instantaneous velocity of an object ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

Kinematic Equations - I

When an object moves with constant acceleration, the velocity of the object changes at a constant rate throughout the motion. The kinematic equations of ...

Kinematic Equations - II

The second kinematic equation expresses the final position of an object in terms of its initial position, the distance traveled with the initial constant ...

Kinematic Equations - III

The first two kinematic equations have time as a variable, but the third kinematic equation is independent of time. This equation expresses final velocity ...

Kinematic Equations: Problem Solving

When analyzing one-dimensional motion with constant acceleration, the problem-solving strategy involves identifying the known quantities and choosing the ...

Free-falling Bodies: Introduction

All objects, neglecting air resistance, fall with the same acceleration towards the Earth&#39;s center due to the force exerted by the Earth&#39;s ...

Free-falling Bodies: Example

An object falling without any air resistance under the influence of gravitational force is said to be in free-fall. For free-falling bodies, the ...

velocity-and-position-by-graphical-method

Velocity and Position by Graphical Method

Velocity and position can be calculated from the known function of acceleration as a function of time. The total area under the acceleration-time graph ...

Velocity and Position by Integral Method

If acceleration as a function of time is known, then velocity and position functions can be derived using integral calculus. For constant acceleration, ...

Use models (graphs, equations, diagrams) to infer motion in one dimension.

PS.Phy.1.1

Position and Displacement Vectors

To describe the motion of an object, one should first be able to describe its position (where it is at any particular time). More precisely, the position ...

average-and-instantaneous-velocity-vectors

Average and Instantaneous Velocity Vectors

To calculate other physical quantities in kinematics, the time variable must be introduced. The time variable not only allows us to state where an object ...

Acceleration Vectors

In everyday conversation, accelerating means speeding up. Acceleration is a vector in the same direction as the change in velocity, &#916;v, therefore the ...

Direction of Acceleration Vectors

Acceleration occurs when velocity changes in magnitude (an increase or decrease in speed), direction, or both. Although acceleration is in the direction ...

Projectile Motion

An object thrown in the air follows a parabolic path under the influence of Earth&#39;s gravitational force. The motion of such an object is called ...

/files/media/science-education/science-education-thumbs/12634.jpg

Projectile Motion: Equations

Projectile motion is commonly observed in our day-to-day life. For example, a basketball thrown by a player, an arrow shot from a bow, and kids jumping ...

Projectile Motion: Example

The theory of projectile motion is very useful for players of several sports to improve their performance. For example, a javelin thrower needs to throw ...

principle-linear-impulse-momentum-for-single-particle-problem

Principle of Linear Impulse and Momentum for a Single Particle: Problem Solving

Consider a massless pulley system consisting of a wooden box and a cylinder of known masses. Determine the speed of the attached objects at a specific ...

Non-uniform Circular Motion

In&#160;uniform circular motion, the particle executing circular motion has a constant speed, and the circle is at a fixed radius. However, not all ...

Relative Velocity in One Dimension

The understanding of the concept of reference frames is essential to discuss relative motion in one or more dimensions. When we say that an object has a ...

Relative Velocity in Two Dimensions

Relative velocity is the velocity of an object as observed from a particular reference frame, or the velocity of one reference frame with respect to ...

Use models (graphs, equations, diagrams) to infer motion in two dimensions.

PS.Phy.1.2

Force

Forces affect every moment of our life. Our bodies are held to the Earth by force, and they are held together by the forces of charged particles. When we ...

Types of Forces

In most situations, forces can be grouped into two categories: contact forces and field forces.&#160; Contact forces occur as a result of direct physical ...

Drawing Free-body Diagrams: Rules

The first step in describing and analyzing most phenomena in physics involves the careful drawing of a free-body diagram. Free-body diagrams are useful in ...

Free Body Diagrams: Examples

Solving problems that involve forces is easy using free-body diagrams. A free-body diagram is a sketch showing all the external forces that are acting on ...

Use free body models to qualitatively and quantitatively analyze systems of forces in one dimension and two dimensions.

PS.Phy.2.1

Newton's First Law: Introduction

Motion draws our attention. Motion itself can be beautiful, causing us to marvel at the forces needed to create spectacular sights, such as that of a ...

Newton's First Law: Application

Experience suggests that an object at rest remains at rest if left alone, and that an object in motion tends to slow down and stop unless some effort is ...

Internal and External Forces

Newton&#39;s first law states that a net external force causes a change in motion. External forces act on an object or system, originating outside of the ...

Newton's Second Law

Newton&#39;s second law is closely related to his first law of motion. It mathematically gives the cause-and-effect relationship between force and changes ...

Mass and Weight

Mass and weight are often used interchangeably in everyday conversation. For example,&#160; medical records often show our weight in kilograms, but never ...

Weightlessness

When an object is dropped, it accelerates toward the center of the Earth. If the net external force on the object is its weight, it is said to be in free ...

Apparent Weight

True weight is the measure of the gravitational force acting on an object. However, if the object accelerates, its measured weight is different from its ...

/files/media/science-education/science-education-thumbs/14695.jpg

Newton's Third Law: Introduction

Whenever one body exerts a force on a second body, the first body experiences a force equal in magnitude and opposite in direction, to the force that it ...

Newton's Third Law: Examples

Newton&#39;s third law states that every action has an equal and opposite reaction. Consider a swimmer pushing off the side of a pool. They push against ...

first-law-particles-in-one-dimensional-equilibrium

First Law: Particles in One-dimensional Equilibrium

Newton&#39;s first law of motion states that a body at rest remains at rest, or if in motion, remains in motion at constant velocity, unless acted on by a ...

first-law-particles-in-two-dimensional-equilibrium

First Law: Particles in Two-dimensional Equilibrium

Recall that a particle in equilibrium is one for which the external forces are balanced. Static equilibrium involves objects at rest, and dynamic ...

Second Law: Motion under Same Force

Newton&#39;s laws can be applied to bodies at rest and bodies in motion. Newton&#39;s first law is applied to bodies in equilibrium, whereas the second ...

second-law-motion-under-same-acceleration

Second Law: Motion under Same Acceleration

Newton&#39;s second law of motion applies to bodies moving under the same acceleration. For example, when a baggage tractor pulls luggage carts, each cart ...

Drag Force and Terminal Speed

An interesting force in everyday life is the force of drag on an object when it is moving in a fluid. Like friction, the drag force always opposes the ...

/files/media/science-education/science-education-thumbs/14697.jpg

Tension

Tension is a force along the length of a medium, in particular, a force carried by a flexible medium, such as a rope or cable. The word &#34;tension&#34; ...

/files/media/science-education/science-education-thumbs/14698.jpg

Carry out investigations to explain the interactions of forces on an object according to Newton's Laws of Motion.

PS.Phy.2.2

Frictional Force

When a body is in motion, it encounters resistance because the body interacts with its surroundings. This resistance is known as friction, a common yet ...

Static and Kinetic Frictional Force

One of the simpler characteristics of sliding friction is that it is parallel to the contact surfaces between systems, and is always in a direction that ...

Dynamics of Circular Motion

An object undergoing circular motion, like a race car, is accelerating because it is changing the direction of its velocity. This centrally directed ...

Dynamics Of Circular Motion: Applications

Suppose a car moves on flat ground and turns to the left. The centripetal force causing the car to turn in a circular path is due to friction between the ...

Use models to qualitatively and quantitatively analyze basic forces related to movement of an object in a circular path (centripetal force).

PS.Phy.2.3

Analyze the motion of objects using time, distance, displacement, speed, velocity, and acceleration.

Eddy Currents and Magnetic Braking

Description

Transcript

Tags

More videos by Standards