Name: magnetic flux and induced emf
Uploaded: 2023-04-30T12:42:35.000Z
Duration: 1 min 10 s
Channel: JoVE
Description: Faraday’s law connects magnetic flux changes to induced emf, or voltage. A change in the magnetic field or in the coil’s orientation with respect to the field can produce this voltage. Magnetic flux describes how many magnetic field lines pass through a given surface area.

K12 Standards

north-carolina-k-12-science-standard-course-of-study

NC K-12 Science Standard Course of Study

9-12

Physical Science

motion-and-stability-forces-and-interactions

Motion and Stability- Forces and Interactions

PS.PSc.6.5

Faraday's Law

Faraday&#39;s law states that in a closed conducting loop, the induced emf equals the negative time derivative of the magnetic flux through that loop. The direction of the induced emf was later given by Lenz.
If the conducting loop consists of N number of identical turns and the flux passing through each one is the same, then the total magnetic flux is N times the magnetic flux through each turn. Hence, the total induced emf will be N multiplied by the rate of change of magnetic flux.
Consider a square coil of length 0.25 meters, which consists of closely wound 500 turns of wire. This coil is placed in the magnetic field that is increasing with the rate of 0.2 tesla per second.
Then the magnitude of induced emf in the coil can be calculated using Faraday&#39;s law. Substituting the values, the magnitude of the induced emf can be estimated.
It is important to observe that the emf can be induced by changing any one of these parameters or a combination of them.

faraday's law

Faraday&#39;s law state that the induced emf is the negative change in the magnetic flux per unit of time. Any change in the magnetic field or change in the orientation of the area of the coil with respect to the magnetic field induces a voltage (emf). The magnetic flux measures the number of magnetic field lines through a given surface area. Magnetic flux is estimated from the integral of the dot product of the magnetic field vector and the area vector. The negative sign describes the direction in which the induced emf drives the current around a circuit. However, that direction is most easily determined with a rule known as Lenz&#39;s law.
In many practical applications, the circuit of interest consists of a number (N) of tightly wound turns. Each turn experiences the same magnetic flux. Therefore, the net magnetic flux through the circuit is N times the flux through one turn, and Faraday&#39;s law is written as the negative of N multiplied by the rate of change of magnetic flux through them.
Users of electrical appliances use a ground fault interrupter (GFI) device, which works as a circuit breaker, to avoid getting an electrical shock. This device works on the principle of Faraday&#39;s law. Another application of Faraday&#39;s law is seen in the electric guitar. In the electric guitar, a pick coil is placed near a vibrating string, and the coil is made of metal that can be magnetized. A permanent magnet inside the coil magnetizes the portion of the string while it is vibrating at a particular frequency, which results in a change in the magnetic flux. This change in flux produces an emf that is fed to the amplifier to produce a sound that listeners can hear.

Faraday&#39;s law state that the induced emf is the negative change in the magnetic flux per unit of time. Any change in the magnetic field or change in ...

Education

JoVE Core

Physics

Unit 1

Electromagnetic Induction

KEY TERMS AND CONCEPTS

magnetic flux and induced emf

Faraday’s law connects magnetic flux changes to induced emf, or voltage. A change in the magnetic field or in the coil’s orientation with respect to the field can produce this voltage. Magnetic flux describes how many magnetic field lines pass through a given surface area.

Magnetic Flux and Induced Emf

induction

Magnetic Flux and Induced Current

Magnetic flux and induced current are linked when a magnetic field changes near a coil. Moving a bar magnet into or out of a coil induces an emf, which is an electromotive force. If the motion goes in the opposite direction, the emf has the opposite sign. Reversing the magnet poles also reverses the direction of the induced emf. The same effect appears when the coil moves instead of the magnet. Relative motion is what matters. A faster motion produces a larger emf. If the magnet and coil stay...

ampere-maxwell's law: problem-solving

Displacement Current in an RC Circuit

Displacement current in an RC circuit can be found by tracking the charging capacitor. A parallel-plate capacitor with capacitance C, plate area A, and plate separation d is connected to a resistor R and a battery of voltage V. When the current starts to flow at t = 0, the charge and voltage on the capacitor change with time. The first step is to use the RC-circuit result for the capacitor voltage at time t. With the z-axis pointing from the positive plate to the negative plate, the electric...

differential form of maxwell's equations

Maxwell’s Equations at a Point

Maxwell’s equations at a point describe how electric and magnetic fields change in space and time. They connect field behavior to charge and current density at a single location. This point-by-point form is useful when studying electromagnetic fields in detail. James Clerk Maxwell was a major physicist of the nineteenth century. He combined earlier laws of electricity and magnetism into one electromagnetic theory. The basic experimental laws came from scientists such as Oersted, Coulomb,...

dc generator

How a DC Generator Makes Current

A DC generator makes electrical energy from mechanical motion. It produces DC pulses with the same polarity, unlike an alternator, which gives sinusoidal AC current. The two machines have similar construction, but a DC generator uses a single split ring instead of a pair of slip rings. That split ring is called a commutator. It works like a rotary switch that changes the contact with the brushes after each half turn of the conducting loop. This action keeps the induced emf at the same...

magnetic damping

Eddy Currents and Magnetic Braking

Eddy currents can create strong drag on moving objects. This drag is called magnetic damping. A metallic pendulum bob swinging between the poles of a strong magnet feels this force as it enters and leaves the field, so its motion dies out quickly. The effect is much smaller for a slotted metal plate. As the plate enters the magnetic field, a changing flux induces an emf, or electromotive force. The slots limit the size of the current loops, and nearby loops can carry currents in opposite...

superconductor

Superconductor Critical Temperature

Superconductivity is the state in which a material has no electrical resistance and magnetic fields cannot penetrate it. A material that reaches this state is called a superconductor. The key idea in the transcript is the critical temperature, which is the temperature at which the change happens. Heike Kamerlingh Onnes of Leiden University first observed this behavior in mercury in 1911. He cooled a mercury sample in liquid helium to study how resistance changed with temperature. As the...

types of superconductors

Superconductors and Magnetic Levitation

Superconductors are materials that can carry electric current with zero resistance when they are cooled below a critical temperature. At this point, they also show the Meissner effect, which means they push magnetic fields out of their interior. A light permanent magnet can then levitate in a stable position above the superconducting sample. This magnetic levitation has real uses. High-speed trains have been built with strong superconducting magnets so they can float above the track and avoid...

Faraday’s law connects magnetic flux changes to induced emf, or voltage. A change in the magnetic field or in the coil’s orientation with respect to the field can produce this voltage. Magnetic flux describes how many magnetic field lines pass through a given surface area.

lenz's law

Magnet Motion and Induced Current

Magnet motion and induced current are linked by Lenz’s law. The law says that the induced emf, or electromotive force, drives current around a wire loop in a direction that opposes the change in magnetic flux that caused it. A moving bar magnet can create this effect in a coil. If the magnet moves toward the coil, the magnetic flux increases and an induced current appears. That current produces a magnetic field that pushes against the stronger field from the magnet. The same idea works in...

motional emf

Induced Current from Changing Magnetic Flux

Induced current from changing magnetic flux depends on how a magnetic field interacts with an area. Magnetic flux changes when the field strength changes, when the area it passes through changes, or when the field turns relative to the surface. When any of these factors vary, the magnetic flux also varies. A change in area can happen in two common ways. The flux through a rectangular loop increases as the loop moves into a magnetic field. The magnetic flux through a rotating coil also changes...

faraday disk dynamo

Faraday Disk Dynamo and DC Output

A Faraday disk dynamo is a DC generator that produces an emf constant in time. It uses a conducting disk that spins at constant angular velocity in a magnetic field. The magnetic field is perpendicular to the plane of the disk. As the disk rotates, the magnetic flux changes and an emf is induced. This causes opposite charges to build up at the rim and at the center of the disk. The direction of the induced emf depends on the direction of the magnetic field and the direction of rotation. If...

induced electric fields

Faraday’s Law and Induced EMF

Faraday’s law explains how a changing magnetic flux can create an induced emf in a circuit. When current is induced, work is being done on the conduction electrons in the wire. That work must come from a source, and the source is not a battery or a magnetic field. A battery does not have to be present in a circuit for current to be induced. Magnetic fields also do not do work on moving charges. Instead, the change in magnetic flux produces an electric field in the wire. This is called an...

induced electric fields: applications

Electric Fields from Changing Magnetism

An electric field can be induced by a changing magnetic field. This induced electric field is nonconservative, which means it does not do net work when a charge moves around a closed path. That behavior is different from an electrostatic field, which comes from a fixed charge distribution. An electrostatic field is conservative, so it does no net work over a closed path. Because of this difference, electric potential can be linked to the electrostatic field, but not to the induced field. When...

eddy currents

Eddy Currents in Recycling, Brakes, and Heat

Eddy currents affect how metals move, stop, and heat up. They form only in conductors, so they are useful for separating metals from nonmetals and for other practical devices. In recycling centers, trash can be sent down a ramp under a strong magnet. Metals in the trash slow down because eddy currents resist their motion. Nonmetals keep moving, so the materials separate. This method works for metals in general, not only ferromagnetic ones. Eddy currents also help in metal detectors. A...

displacement current

Maxwell’s Fix for Changing Currents

Maxwell’s correction to Ampère’s law explains how changing electric fields can create magnetic fields. The key idea is the displacement current, Id, which Maxwell added to the real conduction current, I. This extra term helps the law work when current is not steady. The displacement current is defined using the permittivity of free space, ε0, and the electric flux, ΦE. It is not a real flow of charge. Instead, it is an added term in Maxwell’s equations that acts like current in Ampère’s law. <br...

significance of displacement current

Maxwell’s Fix for Charging Capacitors

Maxwell’s fix for a charging capacitor is the displacement current in Ampère’s law. A displacement current is not a flow of charge like conduction current. It comes from a changing electric field. That is why it is defined using a time-varying electric field and has its own displacement current density. Maxwell added this term to the original Ampère’s law. The result is called generalized Ampère’s law. The added displacement current term lets the law work in regions where no charges are moving.

electromagnetic fields

Electric and Magnetic Fields in Motion

Electric and magnetic fields can come from different sources, but they can act in surprisingly similar ways. Static charges create electrostatic fields. These fields are conservative, which means a test charge does no net work after moving around a complete loop. Fields made by changing magnetic fields behave differently. They are not conservative, and they do net work on a charge. That work is proportional to how fast the magnetic flux changes. These fields also do not follow Gauss’s law for...

maxwell's equation of electromagnetism

Maxwell's Equations and Light Waves

Maxwell's equations bring electricity, magnetism, and light together in one electromagnetic theory. James Clerk Maxwell was a major nineteenth-century physicist, and his work helped shape modern physics. He also made important contributions to the kinetic theory of gases, color vision, and the study of Saturn's rings. Maxwell built on earlier experiments in electricity and magnetism from Oersted, Coulomb, Gauss, and Faraday. These physicists had discovered the basic laws separately. Maxwell...

symmetry in maxwell's equations

Electric and Magnetic Field Symmetry

Electric and magnetic field symmetry is a key part of Maxwell's equations. After the fields are calculated with Maxwell's four equations, the Lorentz force equation gives the force those fields exert on a charged particle moving at a certain velocity. The Lorentz force law combines the effect of the electric field and the magnetic field on the moving charge. Maxwell's equations and the Lorentz force law together describe electricity and magnetism. The symmetry in Maxwell's framework is easier...

electric generator: alternator

How Alternators Produce AC Power

Alternators produce alternating current by rotating a conducting loop in a magnetic field. As the loop turns inside the field, the magnetic flux through the coil changes with time. That changing flux induces an emf, or electric voltage, in the circuit. A simple alternator uses a loop placed in a uniform magnetic field. The loop connects to split rings, and brushes carry the current to the external circuit. As the loop rotates, the magnetic flux changes sinusoidally, so the induced emf also...

back emf

Motor Current and Speed Changes

Motor current and speed changes are linked by back emf in an electric motor. A motor sends current through a wire loop in a magnetic field. The magnetic field pushes on the loop and creates torque, which turns a shaft and does mechanical work. As the coil turns, the magnetic flux through it changes. That changing flux induces an emf, or voltage, by Faraday’s law. The motor then acts like a generator whenever its coil rotates, whether the shaft is turned by an external drive or by the motor...

key terms and concepts

Learn how changing magnetic flux creates induced emf, how Lenz’s law shows current direction, and how the same idea powers GFIs and electric guitars.

Magnetic Flux and Induced Emf | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

PS.Phy.5.2

Virginia  Standards of Learning

HIgh School

PS.9

PS.9.a

PS.9.e

Minnesota Academic Standards in Science

1.2.1 9C.4.2.1.1

new-jersey-student-learning-standards-for-science

New Jersey Student Learning Standards for Science

High School

Motion and Stability: Forces and Interactions

HS-PS2-5

Arizona Science Standards

HS+Phy.P2

HS+Phy.P2U1.1

Alabama Course of Study Science

waves-and-their-applications-in-technologies-for-information-transfer

Waves and Their Applications in Technologies for Information Transfer

9-12.PS.2.3

9-12.PS.2.3.e

Florida Department of Education

SC.912.P.10

SC.912.P.10.16

Texas Essential Knowledge and Skills

PHYS.6

PHYS.6.B

Chemistry and Physics

IPC.6

IPC.6.B

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Forces and Interactions

HS-PS2-5.

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Instantaneous Velocity - I

The average velocity during a time interval cannot tell us how fast or in what direction a particle is moving at any given time during the interval. To ...

Instantaneous Velocity - II

Instantaneous velocity is the quantity that measures how fast an object is moving along its path. In other words, the instantaneous velocity of an object ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

Position and Displacement Vectors

To describe the motion of an object, one should first be able to describe its position (where it is at any particular time). More precisely, the position ...

average-and-instantaneous-velocity-vectors

Average and Instantaneous Velocity Vectors

To calculate other physical quantities in kinematics, the time variable must be introduced. The time variable not only allows us to state where an object ...

Acceleration Vectors

In everyday conversation, accelerating means speeding up. Acceleration is a vector in the same direction as the change in velocity, &#916;v, therefore the ...

Direction of Acceleration Vectors

Acceleration occurs when velocity changes in magnitude (an increase or decrease in speed), direction, or both. Although acceleration is in the direction ...

Linear Momentum

The term momentum is used in various ways in everyday language, most of which are consistent with the precise scientific definition. Generally, momentum ...

Force and Momentum

Force and momentum are intimately related. Force acting over time can change momentum, and Newton&#39;s second law of motion can be stated in its most ...

Analyze and interpret data to explain the motion of an object moving with a constant velocity or that is accelerating.

PS.PSc.4.1

Electrical Current

Electrical current is defined as the rate at which charge flows. When there is a large current present, such as that used to run a refrigerator, a large ...

Drift Velocity

The high speed of electrical signals results from the fact that the force between charges acts rapidly at a distance. Thus, when a free charge is forced ...

Current Density

The total amount of current flowing through one unit value of a cross-sectional area is referred to as current density. If the current flow is uniform, ...

Resistivity

When a voltage is applied to a conductor, an electrical field is generated, and charges in the conductor feel the force due to the electrical field. The ...

Resistance

When a current moves through any conductor, the conductor causes some level of difficulty for the current to flow. The measure of that difficulty is known ...

Ohm's Law

Many materials exhibit a simple relationship between the values of current, voltage, and resistance, known as Ohm&#8217;s law. The current that flows ...

Non-ohmic Devices

In most substances, the current flow is proportional to the voltage applied to it. A simple relationship between the values of current, voltage, and ...

Construct an explanation to compare simple series and parallel circuits in terms of Ohm's Law.

PS.PSc.6.2

Continuity Equation

The total amount of current flowing per unit cross-sectional area is called the current density. Hence, the current passing through a cross-sectional area ...

Boundary Conditions for Current Density

Current density becomes discontinuous across an interface of materials with different electrical conductivities. The normal component of the current ...

Electrical Conductivity

In perfect conductors, the electric field inside is always zero due to the abundance of free electrons, which nullify any field by flowing. As a result, ...

Theory of Metallic Conduction

The conduction of free electrons inside a conductor is best described by quantum mechanics. However, a classical model makes predictions close to the ...

Obtain, evaluate, and communicate information to explain how current is affected by changes in composition, length, temperature, and diameter of wire.

PS.PSc.6.3

Magnetism

Magnets are commonly found in everyday objects, such as toys, hangers, elevators, doorbells, and computer devices. Experimentation on these magnets shows ...

Magnetic Fields

A moving charge or a current creates a magnetic field in the surrounding space, in addition to its electric field. The magnetic field exerts a force on ...

Magnetic Field Lines

The representation of magnetic fields by magnetic field lines is very useful in visualizing the strength and direction of the magnetic field. Each of the ...

Magnetic Flux

The magnetic flux measures the number of magnetic field lines passing through a given surface area. The SI unit for magnetic flux is the weber (Wb). ...

motion-of-a-charged-particle-in-a-magnetic-field

Motion Of A Charged Particle In A Magnetic Field

A charged particle experiences a force when moving through a magnetic field. Consider the field to be uniform and the charged particle to move ...

Magnetic Force

In addition to the electric forces between electric charges, moving electric charges exert magnetic forces on each other. A magnetic field is created by a ...

magnetic-force-on-a-current-carrying-conductor

Magnetic Force On A Current-Carrying Conductor

Moving charges experience a force in a magnetic field. Since the magnetic fields produced by moving charges are proportional to the current, a conductor ...

magnetic-force-on-current-carrying-wires-example

Magnetic Force On Current-Carrying Wires: Example

In a magnetic field, moving charges encounter a force. If a wire contains these moving charges, i.e., if the wire is carrying a current, then a force acts ...

force-on-a-current-loop-in-a-magnetic-field

Force On A Current Loop In A Magnetic Field

Magnetic forces on wires carrying current are most frequently applied in motors. A DC motor is a device that converts electrical energy into mechanical ...

torque-on-a-current-loop-in-a-magnetic-field

Torque On A Current Loop In A Magnetic Field

The most common application of magnetic force on current-carrying wires is in electric motors. These consist of loops of wire, which are placed between ...

Use models to explain magnetism in terms of domains, interactions of poles, and magnetic fields.

PS.PSc.6.4

Analyze motion in terms of speed, velocity, acceleration, and momentum.

Magnetic Flux and Induced Emf

Description

Transcript

Tags

More videos by Standards