Name: ac circuit node method in an angioplasty model
Uploaded: 2024-04-11T12:48:49.000Z
Duration: 1 min 14 s
Channel: JoVE

회전혈관 성형술 시스템에서 터빈은 카테터 버의 회전을 일으켜 관상 동맥에서 플라크 침전물을 제거하는 데 도움이 됩니다.
이 시스템의 작동 및 제어 회로는 전류 제어 전류 소스가 있는 이중 노드 RLC 회로로 모델링할 수 있습니다.
입력 소스 전압, 인덕턴스 및 커패시턴스 값을 알고 있으면 노드 분석을 사용하여 샤프트의 구동 전압을 계산할 수 있습니다.
각 주파수, 인덕턴스 및 커패시턴스 값을 활용하여 인덕터와 커패시터의 임피던스를 계산하고 해당 주파수 도메인 회로를 그립니다.
첫 번째 노드에서 Kirchhoff의 전류 법칙과 옴의 법칙을 적용하고 소스 전류를 표현식으로 대체하면 단순화 된 방정식이 제공됩니다.
마찬가지로, Kirchhoff의 현재 법칙과 Ohm의 법칙을 두 번째 노드에 적용하면 다른 방정식이 생성됩니다. 첫 번째 노드 방정식을 대체하고 방정식을 더 단순화하면 노드 1의 전압이 소스 전압과 같습니다.
마지막으로, 샤프트 전압은 시간 도메인으로 변환됩니다.

ac 회로의 노드 분석

관상동맥에서 플라크 침전물을 제거하는 데 중요한 도구인 터빈이 장착된 카테터를 갖춘 혈관성형술 시스템을 생각해 보세요. 이 복잡한 의료 장치는 전류 제어 전압 소스로 구동되는 이중 노드 RLC 회로를 연상시키는 회로 모델을 사용하여 작동합니다.

이 시스템의 복잡성을 풀기 위해 페이저에 유효한 키르히호프의 현행 법칙(KCL)을 기반으로 하는 강력한 기술인 노드 분석이 사용됩니다. AC 회로는 노드 분석을 사용하여 효과적으로 분석할 수 있습니다.

과정은 입력 소스 전압, 온저항 및 전기용량 값에 대한 정보를 수집하는 것으로 시작됩니다. 이러한 데이터 포인트는 카테터 샤프트의 구동 전압을 계산할 수 있습니다. 각주파수, 온저항 및 전기용량 값을 활용하여 인덕터와 커패시터의 임피던스가 결정되어 주파수 도메인 회로를 매핑합니다.

<img alt="Equation1" src="/files/ftp_upload/15110/15110_PT_Equation_1.svg" style="text-align: center; height: 16px;">
<img alt="Equation2" src="/files/ftp_upload/15110/15110_PT_Equation_2.svg" style="text-align: center; height: 40px;">

KCL과 옴의 법칙은 두 노드 모두에 적용되어 시스템 동작을 설명하는 방정식을 생성합니다. 단순화하고 통합하면 이러한 방정식은 샤프트 전압이 소스 전압과 정확히 동일하다는 것을 나타냅니다.

이 포괄적인 분석은 혈관성형술 시스템의 전기적 작동에 대한 필수적인 통찰력을 제공합니다. 그런 다음 전압 자료를 시간 영역으로 변환하여 의료 절차에서 효과적인 플라그 제거를 위한 시스템 성능을 평가하고 최적화할 수 있습니다.

AC 회로의 노드 분석

로타블러터 혈관 성형술 시스템에서 터빈은 카테터 버의 회전을 일으켜 관상 동맥에서 플라크 침전물을 제거하는 데 도움이 됩니다 
...

Education

교육

JoVE Core

Electrical Engineering

전기공학

Unit 1

제1단원

AC Circuit Analysis

교류 회로 분석

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Node Analysis for AC Circuits

ac circuit node method in an angioplasty model

AC circuit node analysis is used to study an angioplasty system with a catheter turbine. The system helps remove plaque deposits from coronary arteries. Its electrical model is similar to a dual-node RLC circuit driven by a current-controlled voltage source.

The analysis begins by collecting the input source voltage, inductance, and capacitance values. These measurements are used to find the driving voltage for the catheter shaft. The circuit is then viewed in the frequency domain, where angular frequency helps determine the impedance of the inductor and capacitor.

Kirchhoff's current law, or KCL, is applied at both nodes. Ohm's law is also used to write the node equations. Because KCL remains valid for phasors, the AC circuit can be analyzed with nodal analysis in a clear and organized way.

After the equations are simplified and combined, the result shows that the shaft voltage equals the source voltage. The voltage can then be converted back into the time domain. This helps assess and optimize the system's performance for effective plaque removal in medical procedures.

AC Circuit Node Method in an Angioplasty Model

ac-circuit-node-method-in-an-angioplasty-model

sinusoidal sources

AC Waveform Basics and Phase

Alternating current, or AC, changes direction and magnitude over time, unlike direct current, or DC, which flows in one direction with constant polarity. AC is the main form of electricity used for modern power transmission and distribution because it can travel long distances efficiently. In homes, power supplies use sinusoidal sources to deliver electricity. A sinusoidal source creates a voltage that rises and falls in a smooth wave-like pattern. This waveform is called a sinusoid, which is...

graphical and analytic representation of sinusoids

graphical-and-analytic-representation-of-sinusoids

Measuring Sinusoid Phase on an Oscilloscope

Measuring sinusoid phase on an oscilloscope helps compare two sinusoidal voltages with the same amplitude and period. An oscilloscope is an instrument used to display and analyze waveforms. The process starts by reading the peak-to-peak value, which is twice the amplitude of the sinusoid. This shows the maximum voltage swing of the waveform. Next, the period and angular frequency are measured. The period is the time for one complete cycle. Angular frequency, often written as omega, is the rate...

phasors

Phasors for AC Circuit Analysis

Phasors are a mathematical tool for analyzing alternating current, or AC, circuits. They represent sinusoids with complex numbers. The phasor magnitude matches the sinusoid amplitude, and the phasor angle shows the phase measured from the positive x-axis. Phasors make AC circuit analysis simpler by removing time from the current and voltage expressions. That lets an AC circuit be treated like its equivalent direct current, or DC, form for calculations. Phasors can also be written in...

phasor arithmetics

Phasor Rules for AC Circuit Analysis

Phasor rules make AC circuit analysis easier by linking sinusoids to their matching phasors. A phasor is a complex-number form of a sinusoidal signal. This connection helps explain how alternating current changes with time. Differentiation and integration work in both the time domain and the phasor domain. If you take the derivative of a sinusoid in time, its phasor is multiplied by jω, where j is the imaginary unit and ω is the angular frequency. If you integrate a sinusoid in time, its...

phasor relationships for circuit elements

phasor-relationships-for-circuit-elements

AC Circuit Phasors: Resistor, Inductor, Capacitor

AC circuit phasors help show how voltage and current behave for resistors, inductors, and capacitors. Phasor representation moves these relationships from the time domain to the frequency domain, which makes AC circuit analysis easier. For a resistor, Ohm's law still applies. The voltage across the resistor and the current through it stay in phase, so their phasors point in the same direction. An inductor works differently because its voltage depends on the rate of change of current. The...

kirchoff's laws using phasors

AC Circuit Rules with Phasor Diagrams

AC circuit analysis uses Kirchhoff's voltage law and Kirchhoff's current law with phasors. In household wiring, AC power from a distribution panel is sent to appliances connected in parallel. These rules help describe how voltage and current behave in sinusoidal steady state. Kirchhoff's voltage law, or KVL, says that the sum of phasor voltages around a closed loop in an AC circuit is zero. The voltages can first be written in the time domain and then changed into phasor form. In phasor...

impedances and admittance

AC Circuit Response: Impedance and Admittance

AC circuit response changes with frequency, and impedance describes how resistors, inductors, and capacitors affect sinusoidal current flow. In phasor form, voltage and current are used to show this behavior in a clear way. Impedance is a key idea in AC circuit analysis because it measures opposition to current in an alternating circuit. These components behave differently in AC than in DC. In DC circuits, inductors act like short circuits and capacitors act like open circuits. In AC circuits,...

impedance combination

Series and Parallel Impedance Rules

Impedance in series and parallel circuits follows the same rules used for resistors. A string of Christmas lights is a simple example. Each bulb represents one impedance element. In a series connection, the current stays the same through every component. This series behavior matches Kirchhoff’s Voltage Law, or KVL. The total impedance in the circuit is the sum of the individual impedances. The source voltage is then divided among the components based on their values. This is the voltage...

node analysis for ac circuits

AC circuit node analysis is used to study an angioplasty system with a catheter turbine. The system helps remove plaque deposits from coronary arteries. Its electrical model is similar to a dual-node RLC circuit driven by a current-controlled voltage source. The analysis begins by collecting the input source voltage, inductance, and capacitance values. These measurements are used to find the driving voltage for the catheter shaft. The circuit is then viewed in the frequency domain, where...

mesh analysis for ac circuits

Impedance Matching with Mesh Currents

Impedance matching in radio communication uses resistor, capacitor, and inductor circuits to help signals move efficiently between a transmitter and a receiver. The circuit must balance the input and output signals before the current in the capacitor can be found. This makes the problem a good example of AC circuit analysis for high school students. The first step is to identify the input voltage and the output signal. The angular frequency is then taken from the time-domain form of the input...

source transformation for ac circuits

AC Source Conversion in Circuit Analysis

AC source conversion is a circuit analysis method used in the frequency domain. It changes a voltage source in series with an impedance into a current source in parallel with the same impedance, or it converts a current source back into a voltage source. The source values must keep the correct relationship during each change. This method helps solve for an unknown voltage in a circuit that includes a current source and components such as resistors, capacitors, and inductors. Each of these...

th&#233venin equivalent circuits

Finding Voltage and Impedance in Circuit A

The household power distribution system can be simplified with Thevenin's theorem. In this system, distribution lines and transformers form the main network. Electrical appliances can be treated as load impedance, which makes the circuit easier to analyze. An AC circuit can be split into two parts, circuit A and circuit B, with a single pair of terminals between them. Circuit A can then be replaced by its Thevenin equivalent circuit. That equivalent has a voltage source in series with an...

norton equivalent circuits

Norton Current in AC Circuit Analysis

Norton’s theorem helps simplify complex AC circuits by replacing a two-terminal linear network with a smaller equivalent circuit. That equivalent circuit uses an impedance in parallel with a constant current source. The method lets students break one complicated circuit into two parts and analyze them more easily. To build the Norton equivalent, the source is replaced by its internal impedance. The result is the Norton impedance, which is the same as the Thévenin impedance. This parallel...

superposition theorem for ac circuits

Analyzing Mixed-Frequency Linear Circuits

Analyzing mixed-frequency linear circuits starts with the principle of superposition. In a linear circuit, the total output from several inputs is the sum of the outputs from each input acting alone. Here, the inputs are the voltages from independent voltage sources and the currents from independent current sources. When one source is kept active, every other independent source is set to zero. A 0-V voltage source becomes a short circuit, and a 0-A current source becomes an open circuit. This...

op amp ac circuits

Analyzing an Op Amp Audio Filter

An op amp audio filter shapes an amplified sound signal by strongly reducing the lower-frequency parts. In this circuit, the focus is on a basic filter setup used after an amplifier in an audio system. The filter uses an operational amplifier in an inverting arrangement with resistors R1 and R2 and a capacitor C1. The analysis starts with a known input signal and asks for the output signal. To solve it, the capacitor impedance is found first. That requires the angular frequency from the...

design example: capacitance multiplier circuit

design-example-capacitance-multiplier-circuit

Capacitance Multiplier Circuit for Larger Capacitance

A capacitance multiplier circuit creates a larger effective capacitance from a small physical capacitor. In integrated circuit technology, this approach is useful when a small capacitor is not enough. The circuit can multiply capacitance by as much as 1000, so a 10-pF capacitor can act like a 100-nF capacitor. The design uses two op-amps. The first op-amp works as a voltage follower, which helps isolate the generated capacitance from the loading caused by the second stage. The second op-amp...

key terms and concepts

Learn how nodal analysis and KCL are used to model an angioplasty catheter turbine as a dual-node RLC AC circuit and determine shaft voltage.

AC Circuit Node Method in an Angioplasty Model | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

electrical engineering

AC Circuit Node Method in an Angioplasty Model

Description

Transcript

Tags