Question 1

Why is clean glassware important in organic synthesis?

Accepted Answer

Clean glassware is crucial for the efficacy and efficiency of chemical synthesis. Contamination from dirty glassware can affect the reaction and make isolating the final product more challenging. Even glassware that looks clean may contain residues, so when in doubt, clean it to ensure successful synthesis.

Question 2

What is the general method for cleaning all laboratory glassware?

Accepted Answer

The general cleaning method involves rinsing with an organic solvent like acetone to remove oils, scrubbing with warm soapy water using a brush, rinsing with warm tap water, washing with deionized water to avoid hard water stains, and finally rinsing with acetone to expedite drying. This method is sufficient for routine cleaning and is also used after specialized residue removal techniques.

Question 3

When should you use an acid wash to clean glassware?

Accepted Answer

An acid wash is needed when organic residues, metal salts, or stuck-on bases cannot be removed by soapy water alone. Prepare a 1 M hydrochloric acid solution in deionized water, add it to the glassware in a fume hood, swirl to contact dirty areas, and dispose appropriately. Non-oxidizing acids can go down the drain, while organic acids must be neutralized first.

Question 4

How does a base bath help clean heavily contaminated glassware?

Accepted Answer

A base bath uses a 2 M potassium hydroxide solution in isopropyl alcohol to remove stubborn residues when mild acid washes fail. After cleaning with soapy water, place glassware in the bath overnight to soak. The base bath can be reused multiple times, making it cost-effective for routine laboratory use.

Question 5

What is aqua regia and when is it used for glassware cleaning?

Accepted Answer

Aqua regia is a mixture of nitric and hydrochloric acid in a 3:1 ratio, used to remove residual metals from glassware. When mixed, these colorless acids fume and turn dark orange. After pipetting into dirty glassware and swirling to dissolve metals, neutralize the used aqua regia with sodium bicarbonate before depositing in an aqueous waste container.

Question 6

How do you prevent glass ground joints from becoming stuck?

Accepted Answer

Clean glass joints appear frosted, while dirty joints are clear due to oil or grease contamination. After cleaning glassware with an appropriate method, use a paper towel soaked in ethyl acetate and a small spatula to clean the inside, outside, and edges of the joint. Allow the glassware to dry completely to prevent sticking.

Question 7

Why is oven drying preferred for water-sensitive reactions?

Accepted Answer

Oven drying is the safest and preferred method to remove water and limit air exposure in water-sensitive reactions. Place glassware in an oven at 30 to 60 minutes, then quickly cap with a septum and flow nitrogen through while hot. Once cooled, the glassware contains an inert atmosphere with no water vapor, ready for polymerization types polymerizations and applications.

유리 제품 청소 - 평가 퀴즈