Name: how solubility reaches equilibrium
Uploaded: 2024-04-04T10:51:16.000Z
Duration: 1 min 9 s
Channel: JoVE

K12 Standards

Tennessee Academic Standards

High School

Chemistry

motion-and-stability-forces-and-interactions

Motion and Stability: Forces and Interactions

CHEM1.PS2.3

Solubility Equilibria: Overview

Consider a saturated solution of sparingly soluble salt calcium fluoride with excess solid calcium fluoride. The already dissolved calcium fluoride has dissociated into Ca2+ and fluoride ions.
At equilibrium, the dissociation rate of calcium fluoride is equal to its formation rate.&#160;
The extent of dissociation is calculated quantitatively from the equilibrium constant called the solubility product constant or the solubility product.
Ksp is defined as the product of all the concentrations of ions raised to the power of its coefficient in the balanced equation at equilibrium.
According to Le Ch&#226;telier&#39;s principle, the solubility of a sparingly soluble salt increases with an increase in temperature and decreases in the presence of a common ion because of the common ion effect.
If the sparingly soluble salt is the conjugate base of a weak acid, the solubility increases by increasing the acidity.&#160;

oplosbaarheidsevenwichten: overzicht

Wanneer een stof zoals natriumchloride aan water wordt toegevoegd, lost deze op en vormt een waterige oplossing. De mate van oplossing wordt oplosbaarheid genoemd. Het proces van ontbinding kan in evenwicht bestaan, net als andere chemische processen. Oplosbaarheid evenwichten worden ook precipitatie-evenwichten genoemd omdat het oplosbaarheid proces omkeerbaar kan zijn. Het omgekeerde van het oplosbaarheid proces wordt precipitatie genoemd.

Oplosbaarheid is belangrijk in biologische en ecologische processen. Een opmerkelijk voorbeeld van biologische oplosbaarheid is het effect van voedingsmiddelen op het tandglazuur, dat bestaat uit het mineraal hydroxyapatiet. Het eten van voedsel dat rijk is aan suikers produceert organische zuren die hydroxyapatiet oplossen, wat leidt tot tandbederf. Een ander voorbeeld is calciumoxalaat, een slecht oplosbaar zout dat, als het niet wordt weggespoeld door voldoende water te drinken, na verloop van tijd zal neerslaan en nierstenen zal vormen.

Oplosbaarheid evenwichten volgen het principe van Le Chatelier, dat stelt dat als er enige kracht wordt uitgeoefend op een reactie in evenwicht, de netto reactie verschuift naar de richting die de stress van deze kracht helpt verzachten. Factoren die de oplosbaarheid evenwichten van een slecht oplosbaar zout beïnvloeden, zijn onder meer temperatuur, oplosmiddel, gemeenschappelijk ioneneffect, pH van de oplossing en de mate van complexionen vorming.

Wanneer een matig of matig oplosbaar zout aan een oplosmiddel of oplossing wordt toegevoegd, bestaat er een dynamisch evenwicht tussen de gedissocieerde ionen en de vaste verbinding in de verzadigde oplossing. De evenwichtsconstante van een slecht oplosbaar zout is de oplosbaarheid product constante of oplosbaarheid product, Ksp, die onafhankelijk is van de concentratie van de vaste vorm van zout omdat de concentratie van de vaste stof in een verzadigde oplossing constant is.

Oplosbaarheidsevenwichten: overzicht

Consider a saturated solution of sparingly soluble salt calcium fluoride with excess solid calcium fluoride. The already dissolved calcium fluoride has ...

Education

JoVE Core

Analytical Chemistry

Analytische chemie

Unit 1

Chemical Equilibria

Chemische Evenwichten

KEY TERMS AND CONCEPTS

BELANGRIJKE BEGRIPPEN EN CONCEPTEN

how solubility reaches equilibrium

Solubility equilibrium describes what happens when a sparingly soluble salt dissolves in water and then reaches a balance with the solid left over. In a saturated solution, dissolved ions and the undissolved solid are in dynamic equilibrium. The process is reversible, so this topic is also called precipitation equilibrium.

This balance matters in real life. Sugar-rich foods can produce organic acids that dissolve hydroxyapatite, the mineral in tooth enamel, which can lead to tooth decay. A similar idea applies to calcium oxalate, a sparingly soluble salt that may precipitate over time and form kidney stones if it is not flushed out by enough water.

Solubility equilibria follow Le Chatelier's principle. If a stress is applied to an equilibrium system, the net reaction shifts in the direction that reduces that stress. For sparingly soluble salts, factors such as temperature, the solvent, the common ion effect, pH, and complex ion formation can change the balance.

The equilibrium constant for a sparingly soluble salt is called the solubility product constant, or Ksp. It describes the dissolved ions in a saturated solution. The solid form is not included in the constant because its concentration stays fixed in the saturated state.

How Solubility Reaches Equilibrium

ionic strength: overview

Ionic Strength in Salt and Acid Solutions

Ionic strength describes the total electrolyte concentration in a solution. It is a quantitative measure of how many ions are present and how strongly they contribute to the solution. The concept was introduced in 1921 by Gilbert N. Lewis and Merle Randall while they were describing the activity coefficient of strong electrolytes. To calculate ionic strength, written as I or μ, both cations and anions are included. The concentration of each ion matters, but the charge number z matters even...

ionic strength: effects on chemical equilibria

ionic-strength-effects-on-chemical-equilibria

Salt Effect on Salt Solubility

Salt effect can change the solubility of a sparingly soluble salt in water. When an inert ionic compound is added, the dissolved salt may become more soluble. A common example is potassium nitrate added to a saturated calcium sulfate solution, which increases the amount of calcium sulfate that dissolves. Le Châtelier’s principle does not explain this shift well. Instead, the change is described by the effective concentration of ions in solution. Each ion is surrounded by an ionic atmosphere,...

thermodynamics: chemical potential and activity

thermodynamics-chemical-potential-and-activity

Chemical Potential in Solution Activity

Chemical potential and activity describe how a species behaves in a solution. Activity is the effective concentration of a species. It accounts for the electrolytes near that species and depends on the ionic strength of the solution. Activity is calculated as molar concentration multiplied by the activity coefficient. This makes it a more precise way to describe a species in solution than concentration alone. The thermodynamic equilibrium constant is also defined more accurately using activity...

thermodynamics: activity coefficient

Activity Coefficient in Ionic Solutions

Activity coefficient in ionic solutions describes how much a species behaves like its measured concentration. Activity is the effective concentration of a solute in solution. It equals the molar concentration multiplied by the activity coefficient, which is a unitless number. The activity coefficient depends on the total ionic strength of the solution. It shows how far a solution is from ideal behavior. When ionic strength is very low, the activity coefficient of an ionic species is close to...

chemical equilibria: redefining equilibrium constant

chemical-equilibria-redefining-equilibrium-constant

Salt Effect in Equilibrium Constant Calculations

Salt effect changes how a sparingly soluble salt dissolves when an inert salt is added. The size of this effect depends on the ionic strength of the solution. Ionic strength reflects how strongly the ions in the solution interact. In solution, the activity of a species is the product of its concentration and its activity coefficient. A redefined equilibrium constant must account for these activity effects when the ionic strength is moderately high. This form is also called the thermodynamic...

factors affecting activity coefficient

How Ionic Strength Changes Activity Coefficient

The activity coefficient of an ion in water depends on ionic strength, ion charge, and ion size. The extended Debye-Hückel equation describes these effects for aqueous solutions at 25°C. These three factors are partly linked, so changes in one can influence the others. When a solution has almost zero ionic strength, the activity coefficient is close to one. That means the solution behaves almost ideally. As ionic strength rises from 0 to 0.1 mol/L, the activity coefficient usually drops.

chemical equilibria: systematic approach to equilibrium calculations

chemical-equilibria-systematic-approach-to-equilibrium-calculations

Equilibrium Calculations with Mass and Charge

Chemical equilibrium calculations become easier when they are organized around mass balance and charge balance. This approach is useful for systems with multiple equilibria, where several reactions must be considered together. It is especially helpful when finding the solubility of a sparingly soluble salt in water with a common ion present. The first step is to identify every chemical reaction in the system. Next, write the equilibrium constant expression for each reaction. These expressions...

acid&#8211;base equilibria: activity-based definition of ph

acidbase-equilibria-activity-based-definition-of-ph

How Ionic Strength Changes pH

pH depends on hydrogen ion activity, not just hydrogen ion concentration. In an ideal solution, pH is the negative logarithm of the hydrogen ion concentration. In a non-ideal solution, a more accurate pH uses hydrogen ion activity, which combines concentration with an activity coefficient. This difference matters most in very low ionic strength solutions, such as pure water. At first, the hydrogen ion activity coefficient is close to one. When an electrolyte that does not donate or accept a...

ladder diagrams: acid&#8211;base equilibria

Using Ladder Diagrams to Predict pH

Ladder diagrams help show how acid-base equilibria change with pH. They are graphical tools that make the chemistry of a system easier to read during analysis. In a ladder diagram, the vertical axis shows pH. Horizontal bars, or steps, place the pKa values in the system.

ladder diagrams: redox equilibria

Redox Potential Shifts in Ladder Diagrams

Ladder diagrams show redox equilibrium using electrochemical potential, E, as the vertical scale. They help students see how changes in concentration affect which species is most stable. The areas of predominance are set with the Nernst equation. A useful example is the Fe3+/Fe2+ half-reaction, which has a standard-state potential of +0.771 V. At potentials more positive than +0.771 V, Fe3+ predominates. At potentials more negative than +0.771 V, Fe2+ predominates. Ladder diagrams also show...

ladder diagrams: complexation equilibria

Reading Metal-Ligand Ladder Diagrams

Ladder diagrams help show equilibria in metal-ligand complexes. In these diagrams, the vertical scale shows pL, or the concentration of free ligand that has not reacted. The horizontal lines mark the log of formation constants and show which species is dominant in each region. For the Cd and ammonia system, the formation constant K1 for Cd(NH3)2+ is 3.55 × 10^2. Its log value is 2.55, so pNH3 = 2.55 is the dividing line between Cd2+ and Cd(NH3)2+ dominance. Above 2.55, Cd2+ is the predominant...

solubility equilibria: overview

Solubility equilibrium describes what happens when a sparingly soluble salt dissolves in water and then reaches a balance with the solid left over. In a saturated solution, dissolved ions and the undissolved solid are in dynamic equilibrium. The process is reversible, so this topic is also called precipitation equilibrium. This balance matters in real life. Sugar-rich foods can produce organic acids that dissolve hydroxyapatite, the mineral in tooth enamel, which can lead to tooth decay. A...

solubility equilibria: ionic product of water

solubility-equilibria-ionic-product-of-water

Water Ionization and Kw in Equilibrium

Water ionization and the ionic product of water describe how pure water reaches equilibrium. Water is a weak electrolyte, so only a small amount breaks into hydrogen ions and hydroxide ions. At a fixed temperature, the amount of undissociated water stays almost constant. Because of this, the ionic product of water is the product of the hydrogen ion concentration and the hydroxide ion concentration. It is written as K w . The square root of K w gives the concentration of each ion in pure water.

complexation equilibria: overview

Stepwise Metal-Ligand Complexation

Stepwise metal-ligand complexation forms coordination compounds when metal ions and ligands share electrons through dative, or coordinate covalent, bonds. In these reactions, the metal ion binds to one or more ligands until its coordination number is reached. This number tells how many bonds form between the metal ion and the ligands. In aqueous solution, many metal ions are already surrounded by water molecules. These species are called aqua complexes. Complexation reactions are described by...

complexation equilibria: the chelate effect

complexation-equilibria-the-chelate-effect

Chelating Ligands and Metal Complex Stability

Metal complexes form when metal atoms or cations interact with ligands in a complexation reaction. These donor-acceptor adducts are central to understanding how metal ions bind in chemistry. Ligands can bind in different ways. A monodentate ligand uses one donor site. A bidentate ligand uses two donor sites, and a polydentate ligand uses more than two. Ethylene diamine is a bidentate ligand that binds through two nitrogen donor atoms and forms a five-membered ring. Polydentate ligands can...

complexation equilibria: factors influencing stability of complexes

complexation-equilibria-factors-influencing-stability-of-complexes

Complex Ions: Metal and Ligand Stability

Complex ions form when a metal cation accepts electron pairs from ligands, which are the electron pair donors. The stability of these metal complexes depends mainly on the metal ion and on the ligands attached to it. The metal ion’s size and charge play a major role in stability. As the size of the metal ion increases, complex stability usually decreases when the valency of the metal ion and the ligands stays the same. As the charge on the metal ion increases, complex stability increases. <br...

redox equilibria: overview

Redox Electron Transfer and Half-Reactions

Redox reactions involve the transfer of electrons from one species to another. In this type of reaction, electrons are not shared between atoms. They move from the species that loses them to the species that gains them. The species that loses electrons is the reducing agent, also called the reductant. It is oxidized during the reaction. The species that gains electrons is the oxidizing agent, or oxidant, and it is reduced. Redox reactions are often written as two half-reactions. One...

titrimetric methods: types and commonly used strategies

titrimetric-methods-types-and-commonly-used-strategies

Direct, Back, and Displacement Titrations

Titrimetric methods use a standard solution to measure the amount of an analyte in chemistry. The main categories are volumetric, gravimetric, and coulometric methods. Each one reaches the endpoint in a different way. In volumetric titrations, the key measurement is the volume of a titrant with a known concentration. The titrant is added until it reacts completely with the analyte. In gravimetric titrations, the standard solution forms an insoluble precipitate with the analyte. That solid is...

classification of titrimetric analysis based on reaction types

classification-of-titrimetric-analysis-based-on-reaction-types

Four Reaction Types in Titrimetric Analysis

Titrimetric analysis measures solution volume and is also called volumetric analysis. A standard solution with a known concentration is placed in the burette and is called the titrant. The solution with an unknown concentration in the flask is the analyte, or titrand. Titrimetric analysis is grouped into four types based on the reaction between the titrant and the analyte. Acid-base titrations involve a neutralization reaction between an acid and a base. This reaction forms water molecules.

key terms and concepts

Learn how sparingly soluble salts reach solubility equilibrium, why precipitation can occur, and how Ksp, pH, and common ions affect the balance.

How Solubility Reaches Equilibrium | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

CHEM1.PS2.4

Types of Chemical Bonds

Chemical bonding theories were pioneered by American chemist Gilbert&#xA0;N. Lewis. He developed a model called the Lewis model to explain the type and ...

Chemical Bonds


Atoms participate in a chemical bond formation&#160;to acquire a completed valence-shell electron configuration similar to that of the noble gas nearest ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Lewis Symbols and the Octet Rule

Chemical bonds are complex interactions between two or more atoms or ions, which reduce the potential energy of the molecule. Gilbert N. Lewis developed a ...

Draw, identify, and contrast graphical representations of chemical bonds (ionic, covalent, and metallic) based on chemical formulas. Construct and communicate explanations to show that atoms combine by transferring or sharing electrons. EXPLANATION: This standard resumes discussions of interactions between atoms from 7.PS1. In seventh grade, students observed patterns within the periodic table that related the physical and chemical properties of substances to the location of the constituent elements on the periodic table. Revisiting general trends is likely to be necessary however a focus should be placed on the transfer of electrons underlying differences in the differences in properties. It is beneficial to show that electrostatic interactions occur even between two non-conductors. Demonstrations can be carried out by using static charge to hold a balloon against a wall or showing that oppositely charged pieces of invisible tape are attracted not only to each other but also to a neutral conductors and non-conductors such as foil strips or paper.

CHEM1.PS2.1

intermolecular-forces-and-physical-properties

Intermolecular Forces and Physical Properties



Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

comparing-intermolecular-forces-melting-point-boiling-point

Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility

Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

Intermolecular vs Intramolecular Forces

Intermolecular forces (IMF) are electrostatic attractions arising from charge-charge interactions between molecules. The strength of the intermolecular ...

Intermolecular Forces in Solutions

The formation of a solution is an example of a spontaneous process, a process that occurs under specified conditions without energy from some external ...

Exceptions to the Octet Rule

Many covalent molecules have central atoms that do not have eight electrons in their Lewis structures. These molecules fall into three categories:


	...

Understand that intermolecular forces created by unequal distribution of charges result in the varying degrees of attraction between molecules. Compare and contrast the intermolecular forces (hydrogen bonding, dipole-dipole bonding and London dispersion forces) within different types of simple substances (only those following the octet rule) and predict and explain their effect on chemical and physical properties of those substances using models or graphical representations. EXPLANATION: This standard resumes where students left off in 7.PS1. Students' first exposure to all three phases of matter was in third grade, by fifth grade students were investigating phase changes in matter. These discussions have not included a mechanism to explain why states of matter are dependent on temperature and pressure. Students should consider this standard in conjunction with CHEM1.PS2.1 to explore differences in intermolecular attractions within molecular and ionic compounds and the behavior of electrons leading to these differences.

CHEM1.PS2.2

Solution Formation

There is no one solvent that can dissolve every type of solute. Some substances that readily dissolve in a certain solvent might be insoluble in a ...

Energetics of Solution Formation

The formation of a solution is an example of a spontaneous process, which is a process that occurs under specified conditions without energy from some ...

Chemical and Solubility Equilibria

The free energy change associated with dissolving a solute in a liter of solvent is called the free energy of a solution, &#916;Gsolution. The overall ...

Entropy and Solvation

The process of surrounding a solute with solvent is called solvation. It involves evenly distributing the solute within the solvent. The rule of thumb for ...

Physical Properties Affecting Solubility

Solutions of Gases in Liquids
As for any solution, the solubility of a gas in a liquid is affected by the attractive intermolecular forces between solute ...

Solubility Equilibria: Ionic Product of Water

Water is a weak electrolyte and undergoes a small amount of self-ionization.
At any given temperature, the concentration of undissociated water is ...

Construct a model to explain the process by which solutes dissolve in solutes, and develop an argument to describe how intermolecular forces affect the solubility of different chemical compounds. EXPLANATION: A similar task and standard exist in the fifth grade (5.PS1.3). At that time, students performed an investigation (which is again mentioned in CHEM1.PS2.4) into factors affecting solubility. However, student background knowledge was not sufficient to explore any explanation of their results. Explorations into intermolecular attractions in the previous standard (CHEM1.PS2.2) have introduced students to the existence of forces between molecules in a substance. Students can now apply these attractions to form explanations for how solute-solute, solute-solvent, and solvent-solvent attractions all interact as substances dissolve. (Solubility constants and saturation of solutions are beyond the scope of this standard.)

Temperature Dependence on Reaction Rate

The Collision Theory
Atoms, molecules, or ions must collide before they can react with each other. Atoms must be close together to form chemical bonds. ...

Predicting Reaction Outcomes

Kinetics describes the rate and path by which a reaction occurs. In contrast, thermodynamics deals with state functions and describes the properties, ...

Conduct an investigation to determine how temperature, surface, and stirring affect the rate of solubility. Construct an argument to explain the relationship observed in experimental data using collision theory. EXPLANATION: This standard is nearly identical to a fifth grade standard which explores factors affecting the solubility of a compound. Though collision theory is more closely related to rates of reaction, in this case the application of collision theory explores how the same factors underlying collision theory for how reactions also facilitate solvation processes.

How Solubility Reaches Equilibrium

Description

Transcript

Tags

More videos by Standards