SEM-beeldvorming van biologische monsters
View the full transcript and gain access to JoVE Science Education videos
Q1: Why is SEM better than optical microscopy for imaging biological samples?
SEM achieves resolution down to 0.5 nanometers, compared to optical microscopy's 200 nanometer limit. This superior resolution results from the electron beam's 1 nanometer wavelength versus visible light's 500 nanometer wavelength. SEM also provides greater depth of field, making it ideal for visualizing three-dimensional biological structures and nanostructures that optical microscopes cannot clearly resolve.
Q2: What happens when an electron beam hits a biological sample in SEM?
The electron beam causes two types of electron emissions: secondary electrons and backscattered electrons. Secondary electrons are low-energy electrons emitted from the sample surface, providing topographical information about structure. Backscattered electrons reflect opposite to the incident beam and increase in intensity with atomic weight, enabling compositional analysis and distinguishing material differences.
Q3: Why must biological samples be dried before SEM imaging?
SEM operates in a high vacuum environment, which is incompatible with the high water content of biological samples. Water evaporates rapidly in vacuum, causing sample structures to collapse, especially in delicate cells. Samples are treated with fixatives, rinsed, and slowly dehydrated using increasing ethanol concentrations to preserve native structure while removing water.
Q4: What is sputter coating and why is it necessary for SEM imaging?
Sputter coating deposits a thin metal layer, typically gold four to six nanometers thick, onto biological samples. Since biological materials are non-conductive, this metal coating prevents charge accumulation from the electron beam, which would distort images. The conductive surface enables accurate electron detection and improved image quality during SEM analysis.
Q5: How does environmental SEM differ from conventional SEM for imaging sensitive samples?
Environmental SEM (ESEM) maintains a gaseous environment in the specimen chamber, allowing imaging of wet or uncoated samples without drying. Two apertures separate the high vacuum electron gun chamber from the specimen chamber. Although gas molecules scatter the electron beam, the beam energy remains sufficient for imaging, preserving uncollapsed cellular structures and enabling visualization of hydrated biological specimens.
Q6: What preparation steps are critical for imaging delicate biological structures like plant tissues?
Delicate tissues require fixation with solutions like formalin/acetic acid to stabilize structure. Tissues are then dissected in ethanol, placed in mesh containers, and dehydrated through an ethanol series of 70%, 80%, 90%, and 100%. Finally, critical point drying removes remaining solvent without causing collapse, followed by sputter coating with metal before SEM imaging.
Q7: What information can SEM reveal about biological materials that other techniques cannot?
SEM reveals three-dimensional, porous structures with fibrous features smaller than 25 microns, which are difficult to visualize with imaging biological samples with optical and confocal microscopy due to limited depth of field. SEM also provides topographical detail, elemental composition, and crystallinity information through secondary and backscattered electron analysis, enabling comprehensive characterization of nano and microstructures.