Question 1

What is the correct order for removing PPE in healthcare settings?

Accepted Answer

Remove PPE in this sequence: gloves first, then face shield or goggles, followed by the gown, and finally the mask or respirator after exiting the patient's room. This order minimizes contamination risk because gloves are most contaminated and should be removed before touching other equipment. Perform hand hygiene between steps if hands become contaminated and immediately after removing all PPE.

Question 2

How do you safely remove contaminated gloves during doffing?

Accepted Answer

Grasp the outside of the first glove's cuff and peel it off, holding it in your gloved hand. Insert your finger underneath the cuff of the second glove and peel it off, rolling it inside-out over the first glove. This technique prevents skin contact with contaminated surfaces and contains both gloves together for safe disposal.

Question 3

Why is it important to avoid touching the front of goggles or face shields when removing them?

Accepted Answer

The front surface of goggles and face shields is contaminated and poses infection risk if touched directly. Instead, grasp the earpieces or headband at the back or side of the head and lift them outward away from your face. This prevents transferring pathogens from the contaminated front surface to your skin or mucous membranes.

Question 4

What precautions should be taken when removing an isolation gown?

Accepted Answer

Untie the gown's ties and peel it away from your neck and shoulders. Turn the contaminated outer front and sleeves inward, roll the gown over itself, and discard it immediately. Never touch the outer surface of the gown during removal, as it is considered contaminated and must be handled to contain pathogens.

Question 5

How should you remove a mask or respirator to prevent contamination?

Accepted Answer

Avoid touching the front of the mask, as it is contaminated. Instead, grasp the ties or elastic bands, starting with the bottom tie or band, then the top. Lift the mask or respirator away from your face and discard it into a designated waste receptacle. This technique prevents direct contact with contaminated surfaces.

Question 6

Which areas of PPE are considered contaminated during patient care?

Accepted Answer

The outer front and sleeves of the isolation gown, the outer surface of gloves, goggles, mask, respirator, and face shield are all contaminated. These surfaces may have contacted pathogens and require careful handling during removal. Understanding contaminated zones helps healthcare workers avoid self-contamination and cross-contamination.

Question 7

When should hand hygiene be performed during the doffing process?

Accepted Answer

Perform hand hygiene immediately after removing each piece of PPE if your hands become contaminated. Most importantly, wash your hands or use an alcohol-based hand sanitizer immediately after removing all PPE. This final step eliminates any pathogens that may have contacted your hands during the doffing process.

Zdejmowanie środków ochrony osobistej (PPE) w placówkach opieki zdrowotnej II: Zdejmowanie

Browse More Videos