Obciążenie mimośrodowe

Eccentric loading applies force off-center from the column's axis, introducing both direct compressive stress and bending stress. In contrast, centric loading applies force along the centroidal axis, causing uniform compression without bending. This fundamental difference means eccentric loading creates additional stresses that significantly influence column behavior and stability.

An eccentric load decomposes into two components: a centric load F acting along the column's axis and a couple moment induced by the eccentricity. The couple moment's magnitude depends on the distance between the applied load and the column's centroidal axis. This decomposition is essential for analytically modeling the column's response to eccentric loading.

A free-body diagram of a column section is drawn and an appropriate coordinate system is chosen to determine the couple moment at a reference point. This couple moment is then substituted into the differential equation governing the elastic curve. Solving this equation and applying boundary value conditions yields the elastic curve equation, which describes how the column bends under the applied load.

Maximum deflection occurs at the midpoint of the column. This location is critical for assessing column stability because it indicates the maximum amount the column bends under the applied load. The equation for maximum deflection reveals an important phenomenon: deflection approaches infinity as the secant term becomes infinite, marking the threshold for column buckling.

The critical loading condition is derived from the infinite deflection criterion, which occurs when the secant term in the deflection equation becomes infinite. This condition represents the threshold beyond which the column loses stability and undergoes buckling. Engineers use this critical load to ensure columns are designed within safe operational limits for eccentric loading.

Maximum stress occurs at the transverse cross-section at the column's midpoint, where the bending moment is maximum. This location combines both the direct compressive stress from the axial load and the bending stress from the couple moment. Understanding this stress concentration is essential for designing columns to prevent failure under eccentric loading.

By substituting the critical loading condition into the expression for maximum deflection, engineers derive an equation expressing maximum deflection in terms of critical loading. This relationship is pivotal for designing columns that can withstand eccentric loads without excessive deformation or failure, linking stability limits directly to allowable deflection.