Splot: Matematyka, grafika i sygnały dyskretne

The convolution integral in linear time-invariant systems represents the output response when an input signal is applied. It is divided into two components: the zero-input or natural response and the zero-state or forced response. The convolution operator assumes all initial conditions are zero, and both the input signal and impulse response are assumed zero for negative time values, simplifying the mathematical computation.

Graphical convolution involves four sequential steps: folding, shifting, multiplication, and integration. Folding creates a mirror image of the input signal along the y-axis. Shifting slides the folded signal along the time axis. Multiplication performs point-by-point multiplication of the folded and shifted signals. Finally, integration of the resulting signal over time provides the convolution result.

Discrete-time convolution uses a convolution sum instead of an integral to compute system response. For discrete signals, the convolution of the discrete input signal x[n] and impulse response h[n] produces the output signal y[n] at each discrete time step n. This summation-based approach replaces the continuous integration process while maintaining the same fundamental principle of combining input and impulse response.

Assuming zero initial conditions simplifies the convolution integral by allowing both the input signal and impulse response to be treated as zero for negative time values. This assumption eliminates unnecessary computational complexity and focuses the analysis on the system's response to the applied input signal. It is a standard convention in LTI system analysis that enables straightforward mathematical treatment.

The impulse response characterizes how a linear time-invariant system reacts to an input signal. In convolution, the impulse response is combined with the input signal through multiplication and integration to determine the system's total output. Both continuous and discrete convolution processes rely on the impulse response to predict system behavior in response to various inputs.

An RC circuit with a specified input pulse signal illustrates graphical convolution through practical application. The folding, shifting, multiplication, and integration steps are applied to the input pulse and the circuit's impulse response. The resulting convolution output depicts how the RC circuit responds to the input pulse, showing the relationship between input signal, system characteristics, and output response graphically.

The convolution integral decomposes system response into two components: zero-input response (natural response) and zero-state response (forced response). The natural response depends on initial conditions, while the forced response depends on the input signal. Together, they form the complete system output when initial conditions are zero, with the convolution integral combining these responses to predict total system behavior.