Expansion Sleeve Devices
Expansion Sleeve Devices - Related Videos
11:17
Thoracoscopic Extended Right Middle Plus Lower Sleeve Lobectomy for Non-Small-Cell Lung Cancer
0 Views •
2026
Here we present thoracoscopic extended sleeve lobectomy, an applicable procedure for patients with centrally located non-small-cell lung cancer that exceeds an anatomic lobe and improves the probability of complete resection while preserving respiratory capacity.
09:42
Analysis of Thermal Expansion via Dilatometry
0 Views •
2023
Source: J. Jacob Chavez, Ryan T. Davis, and Taylor D. Sparks, Department of Materials Science and Engineering, The University of Utah, Salt Lake City, UT Thermal expansion is extremely important when considering which materials will be used in systems that experience fluctuations in temperature. A high or low thermal expansion in a material may or may not be desirable, depending on the application. For instance, in a common liquid thermometer, a material with a high thermal expansion would be...
08:29
Thermal Measurement Techniques in Analytical Microfluidic Devices
0 Views •
Cited by 6 •
2015
Here, we present three protocols for thermal measurements in microfluidic devices.
06:47
A Murine Model of Vertical Sleeve Gastrectomy
0 Views •
Cited by 12 •
2017
The following describes the performance of vertical sleeve gastrectomy in mice. This is a type of weight-loss surgery that involves removal of approximately 70% of the stomach.
05:16
Sleeve Gastrectomy in Mice using Surgical Clips
0 Views •
Cited by 2 •
2020
The prevalence of diabetes and obesity is continuously increasing worldwide. The mechanisms between diabetes, obesity and their associated mortality and co-morbidities need to be further investigated. Here, we present a protocol for sleeve gastrectomy (SG) in animals as an uncomplicated preclinical model of bariatric surgery.
FAQs
The device translates an applied force into outward movement against surrounding tissue or an adjacent device. Balloon inflation, mechanical deployment, and release of a constrained self-expanding structure provide different ways to generate that movement. This conversion allows the sleeve to enlarge after insertion while producing support, separation, or improved device fit at the treatment site.
Performance depends on balancing expansion force, flexibility, placement accuracy, and biocompatibility. Greater force may improve support, while flexibility can help the component follow the intended path or conform to anatomy. A smaller insertion profile can reduce access demands, but the final design must still enlarge reliably and avoid unnecessary tissue disruption.
These mechanisms differ mainly in how they produce radial enlargement. Balloon inflation supplies an applied expansion force, mechanical deployment uses a deployment action to adjust the device, and a constrained self-expanding structure enlarges after release. The choice affects how expansion is initiated and how the component transitions from a small insertion profile to its working diameter.
Placement begins with introducing the component in its smaller-profile state, followed by positioning it where support, access, tissue separation, or device fitting is needed. Expansion then occurs through balloon inflation, mechanical deployment, or release of a constrained self-expanding structure. Accurate placement matters because the final diameter and support must occur at the intended location.
Their applications include stabilizing passageways, creating working space, separating tissue, and improving the fit of implants or delivery systems. The same expansion principle can therefore support different procedural goals rather than serving only one anatomical function. Selection depends on whether the treatment requires controlled support, access, separation, or compatibility with another component.
Because the component expands against tissue or another device, its material compatibility and mechanical behavior influence how appropriately it performs in the body. Designers must seek effective support while limiting tissue disruption. This requirement explains why expansion force cannot be considered alone; flexibility, placement accuracy, insertion profile, and biocompatibility must be evaluated together.