Name: superconductor critical temperature
Uploaded: 2025-05-22T09:05:52.000Z
Duration: 1 min 24 s
Channel: JoVE

K12 Standards

Virginia  Standards of Learning

HIgh School

Physics

PH.9

PH.9.g

Superconductor

Сверхпроводник — это материал, который обеспечивает нулевое сопротивление потоку электронов при эффективной передаче электрической энергии и отсутствии потерь тепла.
В 1911 году Хайке Камерлинг Оннес заметил, что сопротивление сводится к нулю, когда ртуть охлаждается ниже 4,2 Кельвина. Это явление известно как критическая температура для ртути, а сверхпроводимость — как сверхпроводимость.
Когда температура поднимается выше критической, сопротивление изменяется линейно вместе с ней.
Другой аспект магнитного поведения сверхпроводника наблюдается, когда однородный сверхпроводящий материал помещается во внешнее однородное магнитное поле.
Когда температура превышает критическую температуру, поле внутри материала равно внешнему равномерному магнитному полю. Если она ниже критической температуры, магнитный поток выталкивается из материала, а поле внутри него равно нулю. Это явление известно как эффект Мейснера.
Сверхпроводимость материала ниже критической температуры может быть устранена путем применения минимальной величины магнитного поля, известной как критическое магнитное поле.

<ol>
	<li>OpenStax. (2019). Университетская физика Том 2. [Веб-версия], стр. 396 - 398. Получено из <a href="https://openstax.org/books/university-physics-volume-2/pages/9-6-superconductors">https://openstax.org/books/university-physics-volume-2/pages/9-6-superconductors</a></li>
</ol>

Сверхпроводник

Вещество, достигающее сверхпроводимости, состояния, в котором магнитные поля не могут проникнуть, и отсутствует электрическое сопротивление, называется сверхпроводником. В 1911 году Гейке Камерлинг-Оннес из Лейденского университета, нидерландский физик, обнаружил связь между температурой и сопротивлением элемента ртуть. Проба ртути затем охлаждалась в жидком гелии для изучения линейной зависимости сопротивления от температуры. Было замечено, что по мере снижения температуры сопротивление уменьшается. Камерлинг-Оннес продолжал охлаждать образец ртути дальше, и по мере приближения к температуре 4,2 К сопротивление резко становилось нулевым. Это критическая температура для ртути, при которой образец ртути входит в фазу с абсолютным отсутствием сопротивления, и это явление известно как сверхпроводимость. В случае проводников сопротивление не равно нулю, но меньше 0,01 Ω. Существуют различные методы измерения очень малых сопротивлений, такие как четырёхточечный метод, но омметр не подходит для тестирования сопротивления сверхпроводимости.

Когда температура приближается к абсолютному нулю, было обнаружено, что несколько других материалов также переходят в сверхпроводящую фазу. В 1941 году было обнаружено, что сплав ниобия-нитрида становится сверхпроводящим при 16 Кельвинах; аналогично, в 1953 году было обнаружено, что ванадий-кремний становится сверхпроводящим при 17,5 Кельвинах. Температуры, при которых происходит переход в сверхпроводимость, незаметно становятся выше. Удивительно, многие хорошие проводники, такие как медь, серебро и золото, не обладают сверхпроводимостью.

Вещество, которое достигает сверхпроводимости, состояния, в котором магнитные поля не могут проникнуть, а электрическое сопротивление отсутствует, называется ...

Education

JoVE Core

Физика

Unit 1

Раздел 1

Electromagnetic Induction

Электромагнитная индукция

KEY TERMS AND CONCEPTS

ОСНОВНЫЕ ТЕРМИНЫ И ПОНЯТИЯ

superconductor critical temperature

Superconductivity is the state in which a material has no electrical resistance and magnetic fields cannot penetrate it. A material that reaches this state is called a superconductor. The key idea in the transcript is the critical temperature, which is the temperature at which the change happens.

Heike Kamerlingh Onnes of Leiden University first observed this behavior in mercury in 1911. He cooled a mercury sample in liquid helium to study how resistance changed with temperature. As the temperature fell, the resistance also fell. When the temperature approached 4.2 K, the resistance suddenly dropped to zero. That temperature is the critical temperature for mercury, and the mercury sample entered a superconducting phase with absolute zero resistance.

A normal conductor is different because its resistance is not zero, even when it is very small. In the transcript, conductors are described as having resistance less than 0.01 Ω. Very small resistances can be measured with methods such as the four-point method. An ohmmeter, however, is not acceptable for testing superconductivity resistance.

Other materials have also been found in the superconducting phase near absolute zero. In 1941, an alloy of niobium-nitride became superconducting at 16 kelvin. In 1953, vanadium-silicon became superconductive at 17.5 kelvin. These discoveries showed that transition temperatures were slowly increasing. Even so, many good conductors such as copper, silver, and gold do not show superconductivity.

Superconductor Critical Temperature

induction

Magnetic Flux and Induced Current

Magnetic flux and induced current are linked when a magnetic field changes near a coil. Moving a bar magnet into or out of a coil induces an emf, which is an electromotive force. If the motion goes in the opposite direction, the emf has the opposite sign. Reversing the magnet poles also reverses the direction of the induced emf. The same effect appears when the coil moves instead of the magnet. Relative motion is what matters. A faster motion produces a larger emf. If the magnet and coil stay...

ampere-maxwell's law: problem-solving

Displacement Current in an RC Circuit

Displacement current in an RC circuit can be found by tracking the charging capacitor. A parallel-plate capacitor with capacitance C, plate area A, and plate separation d is connected to a resistor R and a battery of voltage V. When the current starts to flow at t = 0, the charge and voltage on the capacitor change with time. The first step is to use the RC-circuit result for the capacitor voltage at time t. With the z-axis pointing from the positive plate to the negative plate, the electric...

differential form of maxwell's equations

Maxwell’s Equations at a Point

Maxwell’s equations at a point describe how electric and magnetic fields change in space and time. They connect field behavior to charge and current density at a single location. This point-by-point form is useful when studying electromagnetic fields in detail. James Clerk Maxwell was a major physicist of the nineteenth century. He combined earlier laws of electricity and magnetism into one electromagnetic theory. The basic experimental laws came from scientists such as Oersted, Coulomb,...

dc generator

How a DC Generator Makes Current

A DC generator makes electrical energy from mechanical motion. It produces DC pulses with the same polarity, unlike an alternator, which gives sinusoidal AC current. The two machines have similar construction, but a DC generator uses a single split ring instead of a pair of slip rings. That split ring is called a commutator. It works like a rotary switch that changes the contact with the brushes after each half turn of the conducting loop. This action keeps the induced emf at the same...

magnetic damping

Eddy Currents and Magnetic Braking

Eddy currents can create strong drag on moving objects. This drag is called magnetic damping. A metallic pendulum bob swinging between the poles of a strong magnet feels this force as it enters and leaves the field, so its motion dies out quickly. The effect is much smaller for a slotted metal plate. As the plate enters the magnetic field, a changing flux induces an emf, or electromotive force. The slots limit the size of the current loops, and nearby loops can carry currents in opposite...

superconductor

Superconductivity is the state in which a material has no electrical resistance and magnetic fields cannot penetrate it. A material that reaches this state is called a superconductor. The key idea in the transcript is the critical temperature, which is the temperature at which the change happens. Heike Kamerlingh Onnes of Leiden University first observed this behavior in mercury in 1911. He cooled a mercury sample in liquid helium to study how resistance changed with temperature. As the...

types of superconductors

Superconductors and Magnetic Levitation

Superconductors are materials that can carry electric current with zero resistance when they are cooled below a critical temperature. At this point, they also show the Meissner effect, which means they push magnetic fields out of their interior. A light permanent magnet can then levitate in a stable position above the superconducting sample. This magnetic levitation has real uses. High-speed trains have been built with strong superconducting magnets so they can float above the track and avoid...

faraday's law

Magnetic Flux and Induced Emf

Faraday’s law connects magnetic flux changes to induced emf, or voltage. A change in the magnetic field or in the coil’s orientation with respect to the field can produce this voltage. Magnetic flux describes how many magnetic field lines pass through a given surface area.

lenz's law

Magnet Motion and Induced Current

Magnet motion and induced current are linked by Lenz’s law. The law says that the induced emf, or electromotive force, drives current around a wire loop in a direction that opposes the change in magnetic flux that caused it. A moving bar magnet can create this effect in a coil. If the magnet moves toward the coil, the magnetic flux increases and an induced current appears. That current produces a magnetic field that pushes against the stronger field from the magnet. The same idea works in...

motional emf

Induced Current from Changing Magnetic Flux

Induced current from changing magnetic flux depends on how a magnetic field interacts with an area. Magnetic flux changes when the field strength changes, when the area it passes through changes, or when the field turns relative to the surface. When any of these factors vary, the magnetic flux also varies. A change in area can happen in two common ways. The flux through a rectangular loop increases as the loop moves into a magnetic field. The magnetic flux through a rotating coil also changes...

faraday disk dynamo

Faraday Disk Dynamo and DC Output

A Faraday disk dynamo is a DC generator that produces an emf constant in time. It uses a conducting disk that spins at constant angular velocity in a magnetic field. The magnetic field is perpendicular to the plane of the disk. As the disk rotates, the magnetic flux changes and an emf is induced. This causes opposite charges to build up at the rim and at the center of the disk. The direction of the induced emf depends on the direction of the magnetic field and the direction of rotation. If...

induced electric fields

Faraday’s Law and Induced EMF

Faraday’s law explains how a changing magnetic flux can create an induced emf in a circuit. When current is induced, work is being done on the conduction electrons in the wire. That work must come from a source, and the source is not a battery or a magnetic field. A battery does not have to be present in a circuit for current to be induced. Magnetic fields also do not do work on moving charges. Instead, the change in magnetic flux produces an electric field in the wire. This is called an...

induced electric fields: applications

Electric Fields from Changing Magnetism

An electric field can be induced by a changing magnetic field. This induced electric field is nonconservative, which means it does not do net work when a charge moves around a closed path. That behavior is different from an electrostatic field, which comes from a fixed charge distribution. An electrostatic field is conservative, so it does no net work over a closed path. Because of this difference, electric potential can be linked to the electrostatic field, but not to the induced field. When...

eddy currents

Eddy Currents in Recycling, Brakes, and Heat

Eddy currents affect how metals move, stop, and heat up. They form only in conductors, so they are useful for separating metals from nonmetals and for other practical devices. In recycling centers, trash can be sent down a ramp under a strong magnet. Metals in the trash slow down because eddy currents resist their motion. Nonmetals keep moving, so the materials separate. This method works for metals in general, not only ferromagnetic ones. Eddy currents also help in metal detectors. A...

displacement current

Maxwell’s Fix for Changing Currents

Maxwell’s correction to Ampère’s law explains how changing electric fields can create magnetic fields. The key idea is the displacement current, Id, which Maxwell added to the real conduction current, I. This extra term helps the law work when current is not steady. The displacement current is defined using the permittivity of free space, ε0, and the electric flux, ΦE. It is not a real flow of charge. Instead, it is an added term in Maxwell’s equations that acts like current in Ampère’s law. <br...

significance of displacement current

Maxwell’s Fix for Charging Capacitors

Maxwell’s fix for a charging capacitor is the displacement current in Ampère’s law. A displacement current is not a flow of charge like conduction current. It comes from a changing electric field. That is why it is defined using a time-varying electric field and has its own displacement current density. Maxwell added this term to the original Ampère’s law. The result is called generalized Ampère’s law. The added displacement current term lets the law work in regions where no charges are moving.

electromagnetic fields

Electric and Magnetic Fields in Motion

Electric and magnetic fields can come from different sources, but they can act in surprisingly similar ways. Static charges create electrostatic fields. These fields are conservative, which means a test charge does no net work after moving around a complete loop. Fields made by changing magnetic fields behave differently. They are not conservative, and they do net work on a charge. That work is proportional to how fast the magnetic flux changes. These fields also do not follow Gauss’s law for...

maxwell's equation of electromagnetism

Maxwell's Equations and Light Waves

Maxwell's equations bring electricity, magnetism, and light together in one electromagnetic theory. James Clerk Maxwell was a major nineteenth-century physicist, and his work helped shape modern physics. He also made important contributions to the kinetic theory of gases, color vision, and the study of Saturn's rings. Maxwell built on earlier experiments in electricity and magnetism from Oersted, Coulomb, Gauss, and Faraday. These physicists had discovered the basic laws separately. Maxwell...

symmetry in maxwell's equations

Electric and Magnetic Field Symmetry

Electric and magnetic field symmetry is a key part of Maxwell's equations. After the fields are calculated with Maxwell's four equations, the Lorentz force equation gives the force those fields exert on a charged particle moving at a certain velocity. The Lorentz force law combines the effect of the electric field and the magnetic field on the moving charge. Maxwell's equations and the Lorentz force law together describe electricity and magnetism. The symmetry in Maxwell's framework is easier...

electric generator: alternator

How Alternators Produce AC Power

Alternators produce alternating current by rotating a conducting loop in a magnetic field. As the loop turns inside the field, the magnetic flux through the coil changes with time. That changing flux induces an emf, or electric voltage, in the circuit. A simple alternator uses a loop placed in a uniform magnetic field. The loop connects to split rings, and brushes carry the current to the external circuit. As the loop rotates, the magnetic flux changes sinusoidally, so the induced emf also...

back emf

Motor Current and Speed Changes

Motor current and speed changes are linked by back emf in an electric motor. A motor sends current through a wire loop in a magnetic field. The magnetic field pushes on the loop and creates torque, which turns a shaft and does mechanical work. As the coil turns, the magnetic flux through it changes. That changing flux induces an emf, or voltage, by Faraday’s law. The motor then acts like a generator whenever its coil rotates, whether the shaft is turned by an external drive or by the motor...

key terms and concepts

Learn how superconductivity appears at a critical temperature, why mercury became a classic example, and how other materials also show zero resistance.

Superconductor Critical Temperature | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

The de Broglie Wavelength

In the macroscopic world, objects that are large enough to be seen by the naked eye follow the rules of classical physics. A billiard ball moving on a ...

dual-nature-of-electromagnetic-em-radiation

Dual Nature of Electromagnetic (EM) Radiation

Electromagnetic (EM) radiation consists of electric and magnetic field components oscillating in planes perpendicular to each other and mutually ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. wave/particle duality;

PH.9.a

The Uncertainty Principle

Werner Heisenberg considered the limits of how accurately one can measure properties of an electron or other microscopic particles. He determined that ...

The Quantum-Mechanical Model of an Atom

Shortly after de Broglie published his ideas that the electron in a hydrogen atom could be better thought of as being a circular standing wave instead of ...

Quantum Numbers

It is said that the energy of an electron in an atom is quantized; that is, it can be equal only to certain specific values and can jump from one energy ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. quantum mechanics and uncertainty;

PH.9.b

Principle of Equivalence

According to Albert Einstein (1897-1955), free-falling and feeling weightless are intrinsically linked. If a person were in free-fall under gravity, for ...

space-time-curvature-and-the-general-theory-of-relativity

Space-Time Curvature and the General Theory of Relativity

In 1905, Albert Einstein published his special theory of relativity. According to this theory, no matter in the universe can attain a speed greater than ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. relativity;

PH.9.c

Nuclear Stability

Protons and neutrons, collectively called nucleons, are packed together tightly in a nucleus. With a radius of about 10&#8722;15 meters, a nucleus is ...

Nuclear Binding Energy

The difference between the calculated and experimentally measured masses is known as the mass defect of the atom. In the case of helium-4, the mass defect ...

Radioactive Decay and Radiometric Dating

Radioactivity is a spontaneous disintegration of an unstable nuclide and is a random process, as all the nuclei in the sample do not decay simultaneously. ...

Nuclear Fission

Many heavier elements with smaller binding energies per nucleon can decompose into more stable elements that have intermediate mass numbers and larger ...

Nuclear Power

Controlled nuclear fission reactions are used to generate electricity. Any nuclear reactor that produces power via the fission of uranium or plutonium by ...

Nuclear Fusion

The process of converting very light nuclei into heavier nuclei is also accompanied by the conversion of mass into large amounts of energy, a process ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. nuclear physics;

PH.9.d

Molecular and Ionic 
Solids

Crystalline solids are divided into four types: molecular, ionic, metallic, and covalent network based on the type of constituent units and their ...

Metallic Solids

Metallic solids such as crystals of copper, aluminum, and iron are formed by metal atoms. The structure of metallic crystals is often described as a ...

Network Covalent Solids

Network covalent solids contain a three-dimensional network of covalently bonded atoms as found in the crystal structures of nonmetals like diamond, ...

States of Matter

Solids, liquids, and gases are the three states of matter commonly found on Earth. A solid is rigid and possesses a definite shape. A liquid flows and ...

physical-and-chemical-properties-of-matter

Physical and Chemical Properties of Matter

The characteristics that enable us to distinguish one substance from another are called properties.

Physical Properties of Matter

A physical property is ...

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

comparing-intermolecular-forces-melting-point-boiling-point

Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility

Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

Structures of Solids

Solids in which the atoms, ions, or molecules are arranged in a definite repeating pattern are known as crystalline solids. Metals and ionic compounds ...

lattice-centering-and-coordination-number

Lattice Centering and Coordination Number

The structure of a crystalline solid, whether a metal or not, is best described by considering its simplest repeating unit, which is referred to as its ...

Ionic Crystal Structures

Ionic crystals consist of two or more different kinds of ions that usually have different sizes. The packing of these ions into a crystal structure is ...

Chemical Bonds


Atoms participate in a chemical bond formation&#160;to acquire a completed valence-shell electron configuration similar to that of the noble gas nearest ...

Covalent Bonds

When two atoms share electrons to complete their valence shells they create a covalent bond. An atom&#x2019;s electronegativity&#x2014;the force with ...

Ionic Bonds

When atoms gain or lose electrons to achieve a more stable electron configuration they form ions. Ionic bonds are electrostatic attractions between ions ...

Hydrogen Bonds

Hydrogen BondsHydrogen bonds are weak attractions between atoms that have formed other chemical bonds. One of these atoms is electronegative, like oxygen, ...

Van der Waals Interactions

Atoms and molecules interact with each other through intermolecular forces. These electrostatic forces arise from attractive or repulsive interactions ...

Lewis Symbols and the Octet Rule

Chemical bonds are complex interactions between two or more atoms or ions, which reduce the potential energy of the molecule. Gilbert N. Lewis developed a ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

The Born-Haber Cycle

Lattice Energy&#xA0;

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a ...

trends-in-lattice-energy-ion-size-and-charge

Trends in Lattice Energy: Ion Size and Charge

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a compound is a measure ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Electronegativity

Whether a bond is nonpolar or polar covalent is determined by a property of the bonding atoms called electronegativity.&#xA0;

Electronegativity values of ...

bond-polarity-dipole-moment-and-percent-ionic-character

Bond Polarity, Dipole Moment, and Percent Ionic Character

Bond Polarity

The absolute value of the difference in electronegativity (&Delta;EN) of two bonded atoms provides a rough measure of the polarity to be ...

lewis-structures-of-molecular-compounds-and-polyatomic-ions

Lewis Structures of Molecular Compounds and Polyatomic Ions

To draw Lewis structures for complicated molecules and molecular ions, it is helpful to follow a step-by-step procedure as outlined:


	Determine the ...

Resonance

The Lewis structure of a nitrite anion (NO2&minus;) may actually be drawn in two different ways, distinguished by the locations of the N-O and N=O ...

Formal Charges

In some cases, there are seemingly more than one valid Lewis structures for molecules and polyatomic ions. The concept of formal charges can be used to ...

Exceptions to the Octet Rule

Many covalent molecules have central atoms that do not have eight electrons in their Lewis structures. These molecules fall into three categories:


	...

Bond Energies and Bond Lengths

Stable molecules exist because covalent bonds hold the atoms together. The strength of a covalent bond is measured by the energy required to break it, ...

Valence Bond Theory

Overview of Valence Bond Theory

Valence bond theory describes a covalent bond as the overlap of half-filled atomic orbitals (each containing a single ...

Hybridization of Atomic Orbitals I

The mathematical expression known as the wave function, &#x3C8;, contains information about each orbital and the wavelike properties of electrons in an ...

Hybridization of Atomic Orbitals II

sp3d and sp3d&nbsp;2 Hybridization

To describe the five bonding orbitals in a trigonal bipyramidal arrangement, we must use five of the valence shell ...

Molecular Orbital Theory I

Overview of Molecular Orbital Theory

Molecular orbital theory describes the distribution of electrons in molecules in the same way as the distribution of ...

Molecular Orbital Theory II

Molecular Orbital Energy Diagrams

The relative energy levels of atomic and molecular orbitals are typically shown in a molecular orbital diagram. For a ...

Theory of Metallic Conduction

The conduction of free electrons inside a conductor is best described by quantum mechanics. However, a classical model makes predictions close to the ...

Bonding in Metals

Metallic bonds are formed between two metal atoms. A simplified model to describe metallic bonding has been developed by Paul Dr&#xFC;de called the ...

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included. solid state physics;

PH.9.e

The student will investigate and understand that extremely large and extremely small quantities are not necessarily described by the same laws as those studied in Newtonian physics. Topics, such as these listed, may be included.

Superconductor Critical Temperature

Description

Transcript

Tags

More videos by Standards