Спектрофотометры УФ-видимого диапазона

A UV-Vis spectrometer contains a light source (deuterium lamp for UV, tungsten lamp for visible light), a monochromator to split light into component wavelengths, a sample holder or cuvette, and a detector such as a photodiode. These components work together to measure how much light a sample absorbs at specific wavelengths during molecular electronic transitions.

Glass and plastic cuvettes are used for visible spectroscopy because they effectively transmit visible light with spectral cutoffs around 350 nm. UV spectroscopy requires quartz cuvettes with lower cutoffs around 200 nm to allow transmission of UV radiation. This material selection ensures accurate absorbance measurements across different wavelength regions.

A monochromator uses a prism or diffraction grating to split incoming light into its component wavelengths. A system of slits and filters then focuses the desired wavelength onto the sample cell. This allows the spectrometer to analyze one specific wavelength at a time, enabling precise measurement of light absorption.

In single-beam instruments, all light passes through the sample cell sequentially. Double-beam instruments split light into two beams using mirrors and splitters: one passes through the sample, the other through a reference. The spectra are subtracted to remove reference contributions, providing more accurate measurements by compensating for instrumental variations.

Solvents absorb light and affect spectral fine structure. Nonpolar solvents like hexane do not form hydrogen bonds with solutes, preserving fine structure similar to gaseous phase spectra. Polar solvents like water form hydrogen bonds, eliminating fine structure. Choosing an appropriate solvent ensures accurate absorbance measurements and reveals desired spectral details.

Detectors such as photodiodes, photomultiplier tubes, and photodiode arrays measure the intensity of light passing through the sample cell, referred to as I. Modern diode-array spectrophotometers use photodiode detectors to record the entire spectrum simultaneously, enabling rapid and comprehensive analysis of sample absorbance across multiple wavelengths.

UV-Vis spectrophotometers require samples in liquid phase for accurate analysis. Solid organic compounds must be dissolved in a suitable solvent prior to measurement. This ensures uniform light interaction with the sample and allows the spectrometer to measure absorbance reliably. Understanding interaction of EM radiation with matter spectroscopy principles guides this requirement.