Генератор Ван де Граафа

A Van de Graaff generator consists of a metallic hollow sphere placed on an insulating material, a rotating rubber belt driven by a motor with two rollers, and two metallic combs positioned at the bottom and top. The bottom comb connects to a voltage supply, while the top comb transfers charges to the sphere. This design enables the accumulation of large static charges on the outer surface of the sphere.

The bottom metallic comb ionizes air using a 10-kilovolt voltage supply, creating positive charges that move up the rotating belt. At the top, the metallic comb attracts negative charges from the sphere, inducing a net excess positive charge. This process repeats continuously, transferring more charges to the sphere and increasing its electric potential until electrical breakdown occurs.

Van de Graaff generators can produce voltages well within practical limits of 15 million volts. The voltage depends on the sphere's radius and the excess charge accumulated. For example, a generator with a 15-centimeter radius sphere can produce 100 kilovolts, corresponding to an excess charge of 1.67 microcoulombs, calculated using electric potential expressions.

When a person touches the Van de Graaff generator carrying high voltage, the hair acquires a net positive charge. Since like charges repel each other, individual hair strands repel one another and stand up. The person remains insulated from the ground, and because the excess charge is very small, any current passing through causes no harm.

Practical limits arise because large electric fields polarize and eventually ionize surrounding materials, creating free charges that neutralize excess charge or allow it to escape. This electrical breakdown of air prevents the generator from accumulating charge indefinitely. The breakdown occurs when the electric field strength exceeds the air's dielectric strength.

Originally built by Robert Van de Graaff in 1931 for nuclear physics research, these generators accelerate protons to high energies, enabling nuclear reactions with other protons and nuclei. Smaller-sized generators are now used for practical learning in laboratories and science museums to demonstrate high voltage and static electricity principles to students.

The rubber belt, driven by a motor with two rollers, moves positive charges from the bottom metallic comb upward to the top metallic comb. The belt's motion allows continuous charge transport without direct contact between the combs. At the top, charges transfer to the metallic sphere, and the process repeats, enabling rapid accumulation of energy associated with charge distribution.