7.6
Диаграмма сдвига
В изучении механики балки, диаграммы сдвига играют важную роль в понимании распределения сдвиговых сил по всей длине балки. Рассмотрим балку AB, котор…
Диаграмма сдвига представляет собой графическое представление распределения поперечных сил по длине балки.
Рассмотрим балку АВ, опирающуюся на два конца и подвергающуюся перпендикулярным нагрузкам. Постройте его диаграмму сдвига.
Нарисуйте схему свободного тела луча. Используя уравнения равновесия силы и момента, можно рассчитать силы реакции на каждой опоре.
Примените метод сечения к балке.
Далее рассмотрим произвольное расстояние от точки А в пределах области AP. Нарисуем диаграмму свободного тела сечения. В условиях равновесия поперечная сила в сечении равна силе реакции на опоре.
Аналогично рассмотрим произвольную точку в области PQ. Рисуя диаграмму свободного тела и используя уравнение равновесия, можно определить сдвиг в сечении.
Наконец, произвольная точка рассматривается в разделе QB. Построив диаграмму свободного тела и вспомнив уравнение равновесия, можно определить сдвиг в сечении, который остается постоянным до конца балки и в конечном итоге стремится к нулю для поддержания равновесия.
View the full transcript and gain access to JoVE Core videos
Q1: What is a shear diagram and why is it used in beam analysis?
A shear diagram is a graphical representation showing how shear forces are distributed along a beam's length. Engineers use it to visualize internal force patterns in beams subjected to perpendicular loads. This diagram helps identify critical sections where shear stress is highest, essential for structural design and safety assessment.
Q2: How do you construct a shear diagram for a beam?
Start by drawing a free-body diagram of the beam and calculating reaction forces using equilibrium equations. Apply the method of sections at different points along the beam. For each section, draw a free-body diagram and use equilibrium conditions to determine shear force values. Plot these values to create the shear diagram.
Q3: What does the method of sections reveal about shear forces in different beam regions?
The method of sections allows you to isolate portions of the beam and analyze shear forces at arbitrary points. In each region, the shear force remains constant until a load is encountered. The shear value changes at load points and ultimately returns to zero at the beam's end to maintain equilibrium.
Q4: How are reaction forces related to shear force values in the first beam section?
In the first section of a beam from the support, the shear force equals the reaction force at that support. For example, if the reaction force at support A is 24 kN, the shear force in the adjacent section is also 24 kN. This relationship comes directly from applying equilibrium equations to the isolated section.
Q5: Why does shear force change across different regions of a loaded beam?
Shear force changes when perpendicular loads act on the beam. Between load points, shear remains constant. At each load application, the shear value shifts by the magnitude of that load. This variation is captured in the shear diagram and reflects how internal forces redistribute along the beam's length.
Q6: What equilibrium condition ensures shear force goes to zero at the beam's end?
At the beam's end, no external forces act beyond that point, so the shear force must equal zero to satisfy force equilibrium. This boundary condition is fundamental to beam mechanics and serves as a verification check when constructing shear diagrams. If calculated shear does not approach zero at the free end, an error exists in the analysis.
Q7: How does the free-body diagram support shear force calculations at arbitrary points?
The free-body diagram isolates a beam section and shows all external forces and internal reactions acting on it. By applying equilibrium equations to this isolated section, you can solve for the internal shear force. This systematic approach works at any arbitrary distance along the beam, enabling construction of the complete shear diagram.