Принцип Бернулли: Применения

A venturi tube measures fluid velocity using the continuity equation and Bernoulli's principle. As fluid flows through the converging section, its velocity increases and pressure decreases. Vertical tubes connected at the inlet and throat region show a height difference proportional to the pressure difference. With known cross-sectional areas, this pressure difference allows calculation of the fluid's velocity through the tube.

Entrainment devices use high-speed fluid flow to create low-pressure regions that draw in another fluid. Examples include Bunsen burners, which entrain air for combustion, and atomizers, which use a squeeze bulb to create an air jet that entrains perfume droplets. Paint sprayers and carburetors use similar techniques. These devices rely on Bernoulli's principle to function effectively.

A Bunsen burner uses an adjustable gas nozzle to create a high-speed gas jet. This jet creates a low-pressure region that entrains air into the burner tube. The entrained air mixes with the gas, providing oxygen necessary for proper combustion. The amount of air entrained can be controlled by adjusting the nozzle opening.

Bernoulli's principle is used in several fluid measurement devices including venturi tubes, Prandtl tubes (pitot tubes), and manometers connected to closely spaced tubes. These devices measure fluid speed without significantly disturbing the flow. They work by detecting pressure differences created when fluid velocity changes, allowing engineers to determine flow rates in pipes and systems.

Aspirators use a high-speed stream of water to create a lower-pressure region, generating suction. This principle is applied in dental and surgical suction pumps, basement drainage systems, and pressure reduction in vessels. The high-velocity water jet creates a pressure drop that draws in air or other fluids, making aspirators effective for various industrial and medical applications.

According to Bernoulli's principle, when fluid flows through a narrower section of a pipe, the continuity equation requires velocity to increase to maintain constant flow rate. This increased velocity is accompanied by a decrease in pressure. The relationship between velocity and pressure is inverse: as kinetic energy increases, pressure energy decreases, conserving total mechanical energy in the fluid.

The continuity equation states that the mass flow rate must remain constant throughout a pipe. When the cross-sectional area decreases at the venturi throat, the fluid velocity must increase proportionally to maintain constant flow. This velocity increase directly causes the pressure drop measured by the vertical tubes, making the continuity equation essential for calculating fluid velocity from pressure measurements.