Атомно-абсорбционная спектроскопия: обзор

Atomic absorption spectroscopy measures the absorption of electromagnetic radiation by gas-phase atoms, causing electronic excitation to higher-energy orbitals. When radiation of a specific wavelength matches the energy required for an electronic transition, ground-state atoms absorb it. The difference between incident and transmitted radiation intensities quantifies the analyte concentration, following the Beer-Lambert law.

Atomization converts analytes into gas-phase atoms, which is essential for AAS analysis. Although flame temperatures excite some atoms, most remain in the ground state where they can absorb characteristic radiation. Without atomization through flame or furnace methods, the sample cannot interact with electromagnetic radiation for detection and quantification.

The Beer-Lambert law states that absorbance is directly proportional to the concentration of gas-phase atoms in the flame, assuming constant pathlength. This relationship allows AAS to quantify analytes by measuring how much radiation is absorbed. The linear relationship between absorbance and concentration makes AAS a reliable quantitative analytical technique.

AAS offers high sensitivity with detection limits in the nanogram per milliliter range, making it ideal for trace metal analysis in clinical, pharmaceutical, and environmental samples. However, AAS requires liquid-phase or volatile solid samples and necessitates either high-resolution continuum-source spectrometers or separate characteristic radiation sources for each element analyzed.

Atomic absorption lines are highly narrow because they originate from characteristic electronic transitions between specific energy levels. Unlike molecular spectroscopy, these transitions lack accompanying rotational and vibrational components, producing sharp, well-defined absorption lines that enable selective and precise elemental analysis in samples.

AAS requires either high-resolution continuum-source spectrometers or characteristic line sources specific to each element being analyzed. These radiation sources must provide wavelengths matching the exact energy transitions of target atoms. The choice of radiation source depends on the elements of interest and the instrumentation available.

Atomic absorption spectroscopy measures radiation absorbed by ground-state atoms, while other atomic spectroscopy techniques measure emitted or re-emitted radiation. AAS's selectivity and sensitivity for trace metals make it distinct from atomic spectroscopy absorption emission and fluorescence methods, each serving specific applications in elemental analysis.