7.8
Рассмотрим схему с двумя источниками синусоидального напряжения. Каждый из них влияет на схему независимо, а принцип суперпозиции помогает нам понять…
Рассмотрим схему с двумя синусоидальными источниками напряжения.
Согласно принципу суперпозиции, суммарный ток, возникающий от обоих источников, является суммой токов, приведенных каждому источнику в отдельности.
Кроме того, мгновенная мощность — это квадрат мгновенного тока, умноженного на сопротивление.
Интегрирование этого за один период дает среднюю мощность, которая равна сумме средних мощностей каждого источника, и третий член, равный нулю для источников с разными частотами.
Упрощенное уравнение обозначает принцип суперпозиции мощности, утверждая, что средняя мощность, выдаваемая источниками с разными частотами, равна сумме средней мощности, выдаваемой каждым источником.
Этот принцип имеет решающее значение в телекоммуникациях, таких как радиовещание.
Несколько радиостанций транслируют свои сигналы одновременно, каждая из которых выступает в качестве независимого источника электромагнитных волн.
Согласно принципу суперпозиции мощности, общая мощность, получаемая радиостанцией, представляет собой сумму мощностей, передаваемых каждой станцией.
Настройка радиоприемника на определенную частоту позволяет пользователю слушать одну станцию за раз, несмотря на получение сигналов от нескольких станций.
View the full transcript and gain access to JoVE Core videos
Q1: How does the superposition principle apply to circuits with multiple sinusoidal voltage sources?
According to the superposition principle, the total current from multiple sinusoidal voltage sources equals the sum of currents produced by each source independently. Each source influences the circuit separately, and their individual currents add together to produce the combined effect. This principle simplifies analysis by allowing engineers to evaluate each source's contribution before combining results.
Q2: What is the relationship between instantaneous power, current, and resistance?
Instantaneous power equals the square of instantaneous current multiplied by resistance. At any given moment in a circuit, this product represents the rate at which energy is being used. By integrating instantaneous power over one complete period, engineers can calculate the average power delivered to the circuit.
Q3: Why does the cross-term equal zero in the power superposition principle?
When two sinusoidal sources have different frequencies, the cross-term in the power equation integrates to zero over one period. This mathematical property allows the average power delivered by sources with different frequencies to equal the sum of average powers from each source independently. This simplification is fundamental to the power superposition principle.
Q4: How does the power superposition principle apply to radio broadcasting?
Multiple radio stations broadcast electromagnetic waves simultaneously, each acting as an independent power source. According to the power superposition principle, the total power received by a radio equals the sum of powers transmitted by each station. Tuning to a specific frequency allows listeners to isolate one station's signal despite receiving signals from all stations.
Q5: What conditions must be met for the power superposition principle to hold?
The power superposition principle applies when sinusoidal sources operate at different frequencies. Under these conditions, the cross-terms between sources integrate to zero, allowing average power to be calculated as a simple sum. If sources share the same frequency, the principle does not apply in the same simplified form.
Q6: How do individual currents combine in a circuit with multiple voltage sources?
In a circuit with multiple sinusoidal voltage sources, individual currents from each source add together to produce the total circuit current. This additive property stems from the superposition principle, which states that the response of a linear circuit to multiple inputs equals the sum of responses to each input applied independently.