Question 1

What is pH and how does the pH scale work?

Accepted Answer

pH is the negative logarithm of the molar concentration of hydrogen ions in a solution. The pH scale ranges from 0 to 14, where pure water is neutral at pH 7, values below 7 are acidic, and values above 7 are basic. Since the scale is logarithmic, each unit decrease in pH represents a tenfold increase in acidity.

Question 2

How does a pH meter measure the acidity or basicity of a solution?

Accepted Answer

A pH meter uses a hydrogen ion-sensitive electrode that develops an electric potential when immersed in a solution. This potential varies based on the hydrogen ion concentration in the test solution. The meter converts this electrical signal into a pH value, allowing measurement of acidity or basicity in aqueous solutions.

Question 3

Why is pH meter calibration important before taking measurements?

Accepted Answer

Calibration ensures the pH meter provides accurate readings by using standard buffer solutions with known pH values. Buffers spanning the measurement range are used, typically pH 4, 7, and 10. Calibration should be performed at the beginning of each day or before each measurement if extremely precise data are required.

Question 4

What steps should be followed to properly measure pH with a meter?

Accepted Answer

Rinse the pH electrode with distilled water and blot gently on a laboratory tissue. Immerse the electrode into the sample with stirring at the same speed used during calibration. Wait for the reading to stabilize, typically less than 60 seconds, then record the pH value. Rinse between each sample to prevent contamination.

Question 5

How should a pH electrode be handled and stored to maintain its accuracy?

Accepted Answer

The pH electrode bulb must never dry out during use. After measurements, thoroughly rinse the electrode with distilled water and store it in a storage solution. Avoid rubbing the bulb, which can cause static charge buildup. Keep the electrode away from the stirring bar to prevent breakage of this fragile component.

Question 6

What are practical applications of pH measurement in agriculture and environmental science?

Accepted Answer

pH measurement is critical in agriculture for soil testing, as it affects nutrient availability, toxicity, and disease control in crops. In environmental studies, pH is monitored in water runoff to assess potential eutrophication. pH is also strictly regulated in living organisms and measured using specialized sensors in life science research.

Question 7

Why is pH expressed as a logarithmic scale rather than as hydrogen ion concentration?

Accepted Answer

Hydrogen ion concentrations for most solutions are inconveniently small and difficult to compare numerically. The logarithmic pH scale provides a more practical quantity that simplifies data interpretation. This approach makes it easier to express and communicate the wide range of acidity and basicity across different solutions.

Использование pH-метра - Оценочный тест