Name: just-noticeable differences
Uploaded: 2023-04-30T06:47:31.000Z
Duration: 7 min 30 s
Channel: JoVE

K12 Standards

new-york-state-science-learning-standards

New York State Science Learning Standards

High School

Life Science

Structure and Function

HS-LS1-2.

Just-noticeable Differences

1. Equipment
<ol>
	<li>For this experiment, use a computer and experiment implementation software such as E-Prime, or a programming environment such as MATLAB or PsychoPy.</li>
</ol>
2. Stimuli and Experiment Design
<ol>
	<li>This experiment will involve repeated trials with the same basic design. Two discs will appear on the screen simultaneously, one on the left side and one on the right. One will always be bigger than other, and the task will be to use a keypress to select the larger one. The details are as follows:</li>
	<li>Program the experiment to draw a blue disc with a radius of 10 px. The disc will appear in each trial of the experiment, centered in the display vertically, and centered horizontally in either the left or right half of the display. Using one stimulus that appears unchanged in every trial is sometimes called the method of constant stimulus. It just refers to the fact that one of the two stimuli in each trial is always the same. The 10-px blue disc is thus the constant stimulus.</li>
	<li>Opposite the constant stimulus in each trial, display another blue disc. This disc is called the comparison stimulus. It will have a radius between 5 and 9 and between 11 and 15 px. That is 10 total possibilities. In the experiment, include 10 trials each for each of the 20 possible comparison stimuli. So the experiment will involve 200 trials.</li>
	<li>Display the two stimuli on the screen for 200 ms, followed by a screen which reads only 'Which was bigger L/R?' Figure 1 schematizes the sequence of events in each trial.
	<ol>
		<li>'L' key responses will indicate that the left object was bigger, and 'R' key responses will designate that the right one was perceived as bigger.</li>
	</ol>
	</li>
	<li>Be sure that the program outputs the following important data into a table: the trial number, the size of the comparison stimulus, the screen position of the comparison stimulus, the correct response, and the response given by the participant. Figure 2 shows a sample of such a data table.</li>
</ol>
<img alt="Psychological experiment diagram; visual comparison of circles method; attention measurement." src="/files/ftp_upload/10229/10229fig1.jpg" data-altupdatedat="1761830439000" data-alt="Figure 1"> 
Figure 1. A schematic depiction of a single forced-choice trial in an experiment to measure the Just-noticeable difference (JND) for circle size. First, a ready screen prompts the participants that a trial will begin. Next, two blue discs appear in the display, side-by-side. They remain present for only 200 ms, at which point the display prompts the participant for a response. The 'L' key is used to indicate the object on the left, and the 'R' key to indicate the object on the right.
<img alt="Trial comparison data table showing size, position, response evaluation." src="/files/ftp_upload/10229/10229fig2.jpg" data-altupdatedat="1761830439000" data-alt="Figure 2"> 
Figure 2. A sample output table from a forced-choice JND experiment. The columns report the relevant data from the experimental program.
3. Running the experiment
<ol>
	<li>Recruit a participant, and when she arrives in the lab tell her that she will do a simple experiment on the perception of shape. Then have her complete informed consent.</li>
	<li>Seat the participant in front of the testing computer, and explain the task as follows:
	<ol>
		<li>Every trial of this experiment will involve the same basic sequence of events. First, you will see the word 'Ready?' on the screen. Press spacebar when you are ready to begin the trial. At that point, two blue discs will appear on either side of the screen very briefly. When they disappear, the display will read 'Which was bigger, L/R?' Your job is to report which of the two discs looked bigger to you, the one on the right or the one on the left side of the screen. There are 200 trials in the experiment, but they are short. The whole experiment should take under five minutes. Do you have any questions?</li>
	</ol>
	</li>
	<li>After answering any questions, launch the experimental program, and let the participant begin. Leave her in the quiet testing room until the experiment is complete.</li>
</ol>
4. Analyzing the results
<ol>
	<li>To analyze the results, the first thing to do is determine which responses were correct and which were incorrect. Add a column to the data output table for these purposes. Compare the response given and the correct response, marking the final column with a 1 when the response given was correct and 0 when it was not.
	<ol>
		<li>Quickly look to make sure that performance was sensible-that the participant was at or near perfect accuracy when the comparison was 5 and 15 px, differences large enough compared to 10 that no errors should have been made.</li>
	</ol>
	</li>
	<li>Now add another column to the data table, called 'Proportion of C Responses.' In the column, note whether the comparison or the constant was chosen by the participant. If the comparison object was chosen, mark a 1 in the column. If the constant was chosen, mark a 0.</li>
	<li>Now, for each comparison size, compute the fraction of the time that the comparison was selected as larger by the participant. For comparison stimuli of 5, the number should be close to 0, and for comparison stimuli of 15 it should be close to 1.</li>
	<li>To visualize the results, graph them as follows: Make scatter plot, with the size of the comparison on the x-axis and the proportion of times it was chosen on the y-axis. It will look something like the one in Figure 3.</li>
</ol>
<img alt="Comparison size vs. response graph; logistic curve; data analysis; statistical graph; radius pixels." src="/files/ftp_upload/10229/10229fig3.jpg" data-altupdatedat="1761830439000" data-alt="Figure 3"> 
Figure 3. Results of a forced-choice experiment to find the JND for circle radius. Plotted is the proportion of time that the comparison stimulus was selected as larger (by the participant) as a function of the size of the comparison stimulus. The constant stimulus always had a radius of 10 px.

One of the main applications of the constant stimulus approach to measuring a JND has come in neuroscience, specifically in neurophysiology studies devised to investigate how the firing of individual neurons encodes physical properties about the world. These studies usually involve a monkey with electrodes implanted in their visual cortex. The electrodes penetrate individual cells that respond to visual stimulation by firing or spiking, that is, by conducting a rapid electrical signal. In studies on using JND methods, re...

just-noticeable differences

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
Psychophysics is a branch of psychology and neuroscience that tries to explain how physical quantities are translated into neural firing and mental representations of magnitude. One set of questions in this area pertains to just-noticeable differences (JND): How much does something need to change in order for the change to be perceivable? To pump intuitions about this, consider the fact that small children grow at an enormous rate, relatively speaking, but one rarely notices growth taking place on a daily basis. However, when the child returns from sleep-away camp or when a grandparent sees the child after a prolonged absence, just a few weeks of growing is more than perceptible. It can seem enormous! Changes in height are only noticed after an absence because the small changes that take place on a day-to-day basis are too small to be perceivable. But after an absence, many small changes add up. So how much growth needs to take place to be noticeable? The minimal amount is the JND.
Psychologists and neuroscientists measure JND in many domains. How much brighter does a light need to be to be noticed? How much louder does a sound need to be? They often obtain the measurements by employing a forced-choice paradigm. This video will focus on size, demonstrating a standard approach for measuring a JND when the area of a shape changes.

The graph in Figure 3 shows the proportion of time in which the comparison stimulus was chosen as a function of the size of its radius. Recall that the constant stimulus always has a 10-px radius in this experiment. This is why with a radius of 5 or 6 px the comparison is almost never chosen, and it is almost always chosen with a radius if 14 or 15 px. However, with a radius of 9 or 11 px, the comparison is difficult. Participants often make mistakes. The JND is defined a...

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
Psychophysics is a branch of psychology and neuroscience that tries to explain how ...

Exactly how much does something need to change for a difference to be perceived?Think of, for instance, young children who grow rapidly?getting taller on a daily basis. However, it?s often difficult to notice subtle changes, especially if they still struggle to reach a basketball. Over a much longer span, their growth spurt becomes more than perceptible; in fact, the amount can seem enormous! These changes in height are only noticed after a lapse because the small day-to-day differences are too small to be perceivable.The minimal yet perceived amount is the just-noticeable-difference, which, for this example, is the smallest amount of growth noticed.This video demonstrates a standard approach for measuring a just-noticeable-difference in shape size. Not only do we discuss the steps required to design and execute an experiment, but we also explain how to analyze the data and interpret the results describing just how small of a change in area is necessary to be perceived. In this experiment, participants are briefly shown two different circles that vary in size and are forced to choose which one is larger. During each trial, one is always presented with the same circumference, whereas the other is varied. This approach is referred to as the method of constant stimulus.In this case, the constant stimulus is designed to have a radius of 10 px and located randomly on either the left or right side of the screen. In contrast, the other circle, called the comparison stimulus, will have a radius that varies between 5 and 9 and between 11 and 15 px. Given these 10 possibilities, the comparison stimulus is shown 10 times on each side, for a total of 200 trials. The dependent variable is recorded as which stimulus was chosen to be the larger one. Participants are expected to choose correctly if they perceived a difference in size between the two stimuli. However, when the shapes are closer in circumference and below the just-noticeable difference, performance is predicted to decline. To begin the experiment, greet the participant in the lab. With them sitting comfortably in front of the computer, explain the task instructions: The screen will have the word "Ready?" on it until they press the space bar. Watch as two blue stimuli appear and instruct the participant to indicate which stimulus they thought was larger by pressing the 'L' key for left- and 'R' for right-side responses. Remind them that they should guess if they are not sure which one is larger. After answering any questions the participant might have, leave the room. Allow them to complete all of the 200 trials over a 5-min period. When they finish, return to the room and thank them for taking part in the experiment. To analyze the data, first retrieve the programmed output file that captured each participant?s responses. Quickly glance at the data to make sure that performances were sensible?namely, that when the sizes of the comparison stimuli were 5 and 15 px, accuracy was near perfect. Next, add a column to the output table called 'Accuracy' to determine whether the recorded answers are correct or not. Compare those given to the correct responses for all trials. Use the following IF statement to register a 1 when the response given was correct and 0 when it was incorrect. Now, add another column to the table, labeled 'Proportion of Comparison Responses'. Compare the column 'Comparison Position' with 'Response' and use a new IF statement to mark a '1' when the comparison stimulus was chosen or a '0' if the constant circle was chosen. To visualize the results, make a scatter plot with the size of the comparison on the x-axis and the proportion of times it was chosen as being larger on the y-axis. Recall that the constant stimulus always had a 10-px radius, which is why stimuli with 5 or 6 px radii were almost never chosen and those with 14 or 15 were always chosen. With a radius of 9 or 11 px, the comparison was more difficult and participants often made mistakes. In fact, performance was at chance level, suggesting that differences were not being perceived. To calculate the just-noticeable-difference, take the comparison size that was chosen 75% of the time, in this case a radius of 12, minus the comparison size that was chosen 25% of the time?radius of 8?and divide the result by 2 for an answer of 2 px. In other words, the radii of the circles need to differ by at least 2 px for their sizes to be accurately perceived.Now that you are familiar with just-noticeable differences in the perception of visual objects? sizes, let?s look at how this paradigm is used in neurophysiological studies to explore how the brain responds and in other behavioral situations, such as distinguishing between fat levels in food.Researchers have investigated how individual neurons in the visual cortex encode the physical properties of the world, like objects? sizes. Using electrophysiological recording techniques that measure firing patterns in conjunction with stimuli presentation, researchers found that neurons that are sensitive to size will sometimes respond in the same way to objects that are actually different sizes.This is why JND are just-barely-noticeable: sometimes, in the brain, the relevant stimuli really do produce indistinguishable effects.In addition, researchers have used a just-noticeable-differences task to characterize individual thresholds for detecting fat concentrations in food.They found that individuals with a higher body mass index required a higher just-noticeable difference, or higher threshold, before tasting fatty acids in the samples. These results could lead to new approaches to limit excess fat consumption.You?ve just watched JoVE?s introduction to just-noticeable differences. Now you should have a good understanding of how to design and run the experiment, as well as how to analyze and assess the results.Thanks for watching!

Education

JoVE Science Education

Psychology

Sensation and Perception

color afterimages

Color Afterimages

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
Human color vision is impressive. People with normal color vision can tell apart ...

finding your blind spot and perceptual filling-in

finding-your-blind-spot-and-perceptual-filling-in

Finding Your Blind Spot and Perceptual Filling-in

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
In the back of everyone's eye is a small piece of neural tissue called the retina. ...

perspectives on sensation and perception

Perspectives on Sensation and Perception

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
The study of sensation&#8212;how signals are transduced from sensory organs, like ...

motion-induced blindness

Motion-induced Blindness

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
One thing becomes very salient after basic exposure to the science of visual ...

the rubber hand illusion

The Rubber Hand Illusion

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
Reaching for objects, walking without hitting obstacles, landing on a chair as you ...

the ames room

The Ames Room

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
The most difficult challenge of visual perception is often described as one of ...

inattentional blindness

Inattentional Blindness

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
We generally think that we see things pretty well if they are close by and right in ...

spatial cueing

Spatial Cueing

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
Attention refers to the limited human ability to select some information for ...

the attentional blink

The Attentional Blink

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
In order for recognition of a certain stimulus to take place, visual attention ...

crowding

Crowding

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
Human vision depends on light-sensitive neurons that are arranged in the back of ...

the inverted-face effect

The Inverted-face Effect

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
In perception, it is often the case that the ability to recognize and interpret ...

the mcgurk effect

The McGurk Effect

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
Spoken language, a singular human achievement, relies heavily on specialized ...

the staircase procedure for finding a perceptual threshold

the-staircase-procedure-for-finding-a-perceptual-threshold

The Staircase Procedure for Finding a Perceptual Threshold

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
Psychophysics is the name for a set of methods in perceptual psychology designed in ...

object substitution masking

Object Substitution Masking

Source: Laboratory of Jonathan Flombaum&#8212;Johns Hopkins University
Visual masking is a term used by perceptual scientists to refer to a wide range of ...

sensation and perception

This collection delves into a variety of procedures to study how the brain processes our complex sensory world and solves problems confronting conscious awareness and visual, tactile, and auditory perception. 

Explore just-noticeable differences in psychophysics and see how scientists measure the smallest size change people can detect using a forced-choice task.

Measuring Size Changes with JND | JoVE K12

Jonathan Flombaum

Overview

Stimulus and Experimental Design

Running the Experiment

Data Analysis and Representative Results

Applications

Summary

Characteristics of Life

Biology is a natural science that studies life and living organisms, including their structure, function, development, interactions, evolution, ...

https://cloudfront.jove.com/files/media/science-education/science-education-thumbs/10647.jpg

Cell Structure

Background
Cells represent the most basic biological units of all organisms, whether it be simple, single-celled organisms like bacteria, or large, ...

Visualizing Onion and Cheek Cells
ExpandImmediately before the experiment, wash and peel onion bulbs for the class.
Remove the entire brown outer skin and ...

Visualizing Onion and Human Cells
ExpandIn this experiment you will prepare different types of cells from a plant and animal, onion and human ...

What are Cells?

Cell Diversity

The concept of a cell started with microscopic observations of dead cork tissue by Robert Hooke in 1665. Hooke coined the term &#34;cell&#34; based on the ...

Cytoplasm

The cytoplasm consists of organelles and a framework of protein scaffolds called the cytoskeleton suspended in an aqueous solution, the cytosol. The ...

The Nucleus

The nucleus is a membrane-bound organelle that acts as a control center in a eukaryotic cell. It contains chromosomal DNA, which controls gene expression ...

The Central Dogma

The DNA Helix

Nucleic Acids

DNA as a Genetic Template

Structure of a Gene

A gene is the fundamental unit of heredity. Every individual has two copies of each gene, one inherited from each parent. Although most people contain the ...

Chromosome Structure

Base-pairing and DNA Repair

What is Gene Expression?

A gene is a stretch of DNA that serves as the blueprint for functional RNAs and proteins. Since DNA is comprised&#160; of nucleotides and proteins are ...

RNA Structure

The basic structure of RNA consists of a string of ribonucleotides attached by phosphodiester bonds. Although most RNA is single-stranded, it can form ...

Types of RNA

Three main types of RNA are involved in protein synthesis: messenger RNA (mRNA), transfer RNA (tRNA), and ribosomal RNA (rRNA). These RNAs perform diverse ...

Transcription

Transcription is the synthesis of RNA from a DNA sequence by RNA polymerase. It is the first step in producing a protein from a gene sequence. ...

Translation

Translation is the process of synthesizing proteins from the genetic information carried by messenger RNA (mRNA). Following transcription, it constitutes ...

Ribosomes

Ribosomes translate genetic information encoded by messenger RNA (mRNA) into proteins. Both prokaryotic and eukaryotic cells have ribosomes. Cells that ...

Protein and Protein Structures

Proteins: From Genes to Degradation

From DNA to Protein

The flow of genetic information in cells from DNA to mRNA to protein is described by the central dogma, which states that genes specify the sequence of ...

Protein Folding

Proteins are chains of amino acids linked together by peptide bonds. Upon synthesis, a protein folds into a three-dimensional conformation, critical to ...

An Overview of Gene Expression

Gene expression is the complex process where a cell uses its genetic information to make functional products. This process is regulated at multiple ...

an-introduction-to-caenorhabditis-elegans

An Introduction to Caenorhabditis elegans

Caenorhabditis elegans is a microscopic, soil-dwelling roundworm that has been powerfully used as a model organism since the early 1970&rsquo;s.  It was ...

An Overview of Genetic Analysis

An organism&#8217;s physical traits, or phenotype, are a product of its genotype, which is the combination of alleles (gene variants) inherited from its ...

An Introduction to Cell Death

Necrosis, apoptosis, and autophagic cell death are all manners in which cells can die, and these mechanisms can be induced by different stimuli, such as ...

An Overview of Genetic Engineering

Genetic engineering &#8211; the process of purposefully altering an organism&#8217;s DNA &#8211; has been used to create powerful research tools and model ...

An Introduction to Cell Division

Cell division is the process by which a parent cell divides and gives rise to two or more daughter cells. It is a means of reproduction for single-cell ...

An Overview of Genetics and Disease

Many human diseases are associated with mutations or variations in genetic sequences. Some of these genetic variants are heritable, passed down from ...

an-introduction-to-cellular-and-molecular-neuroscience

An Introduction to Cellular and Molecular Neuroscience

Cellular and molecular neuroscience is one of the newest and fastest growing subdisciplines in neuroscience. By investigating the influences of genes, ...

Annexin V and Propidium Iodide Labeling

Staining with annexin V and propidium iodide (PI) provides researchers with a way to identify different types of cell death&#8212;either necrosis or ...

an-introduction-to-developmental-genetics

An Introduction to Developmental Genetics

Development is the complex process through which a single-celled embryo transforms into a multicellular organism. Developmental processes are guided by ...

Bacterial Transformation: Electroporation

The term &#x201C;transformation&#x201D; refers cellular ingestion of foreign DNA.  In nature, transformation can occur in certain types of bacteria.  In ...

an-introduction-to-molecular-developmental-biology

An Introduction to Molecular Developmental Biology

Molecular signals play a major role in the complex processes occurring during embryonic development. These signals regulate activities such as cell ...

bacterial-transformation-the-heat-shock-method

Bacterial Transformation: The Heat Shock Method

Transformation is the process that occurs when a cell ingests foreign DNA from its surroundings. Transformation can occur in nature in certain types of ...

an-introduction-to-saccharomyces-cerevisiae

An Introduction to Saccharomyces cerevisiae

Saccharomyces cerevisiae (commonly known as baker&rsquo;s yeast) is a single-celled eukaryote that is frequently used in scientific research.  S. ...

Cell Cycle Analysis

Cell cycle refers to the set of events through which a cell grows, replicates its genome, and ultimately divides into two daughter cells through the ...

An Introduction to Transfection

Transfection is the process of inserting genetic material, such as DNA and double stranded RNA, into mammalian cells. The insertion of DNA into a cell ...

Chromatin Immunoprecipitation

Histones are proteins that help organize DNA in eukaryotic nuclei by serving as &#8220;scaffolds&#8221; around which DNA can be wrapped, forming a complex ...

An Overview of Epigenetics

Since the early days of genetics research, scientists have noted certain heritable phenotypic differences that are not due to differences in the ...

community-dna-extraction-from-bacterial-colonies

Community DNA Extraction from Bacterial Colonies

Source: Laboratories of Dr. Ian Pepper and Dr. Charles Gerba - The University of Arizona
Demonstrating Author: Luisa Ikner
Traditional methods of analysis ...

Cytogenetics

Cytogenetics is the field of study devoted to chromosomes, and involves the direct observation of a cell&#8217;s chromosomal number and structure, ...

embryonic-stem-cell-culture-and-differentiation

Embryonic Stem Cell Culture and Differentiation

Culturing embryonic stem (ES) cells requires conditions that maintain these cells in an undifferentiated state to preserve their capacity for self-renewal ...

DNA Gel Electrophoresis

DNA gel electrophoresis is a technique used for the detection and separation of DNA molecules. An electric field is applied to a gel matrix comprised of ...

Enzyme Assays and Kinetics

Enzyme kinetics describes the catalytic effects of enzymes, which are biomolecules that facilitate chemical reactions necessary for living organisms. ...

DNA Ligation Reactions

In molecular biology, ligation refers to the joining of two DNA fragments through the formation of a phosphodiester bond.  An enzyme known as a ligase ...

explant-culture-for-developmental-studies

Explant Culture for Developmental Studies

Explant culture is a technique in which living cells or tissues are removed from an embryo for continued development outside of the organism. This ex vivo ...

DNA Methylation Analysis

Methylation at CpG dinucleotides is a chemical modification of DNA hypothesized to play important roles in regulating gene expression. In particular, the ...

Expression Profiling with Microarrays

Microarrays are important tools for profiling gene expression, and are based on complementary binding between probes that are attached to glass chips and ...

Density Gradient Ultracentrifugation

Density gradient ultracentrifugation is a common technique used to isolate and purify biomolecules and cell structures. This technique exploits the fact ...

F&#246;rster Resonance Energy Transfer (FRET)

F&#246;rster resonance energy transfer (FRET) is a phenomenon used to investigate close-range biochemical interactions. In FRET, a donor photoluminescent ...

detecting-environmental-microorganisms-with-polymerase-chain-reaction

Detecting Environmental Microorganisms with the Polymerase Chain Reaction and Gel Electrophoresis

Source: Laboratories of Dr. Ian Pepper and Dr. Charles Gerba - Arizona University
Demonstrating Author: Bradley Schmitz
Polymerase chain reaction (PCR) is ...

Gel Purification

Gel purification is used to recover DNA fragments after electrophoretic separation. DNA recovery from an agarose gel includes three basic steps: binding, ...

Detecting Reactive Oxygen Species

Reactive oxygen species are chemically active, oxygen-derived molecules capable of oxidizing other molecules. Because of their reactive nature, there are ...

Gene Silencing with Morpholinos

Morpholino-mediated gene silencing is a common technique used to study roles of specific genes during development. Morpholinos inhibit gene expression by ...

development-and-reproduction-of-the-laboratory-mouse

Development and Reproduction of the Laboratory Mouse

Successful breeding of the laboratory mouse (Mus musculus) is critical to the establishment and maintenance of a productive animal colony. Additionally, ...

Genetic Crosses

To dissect genetic processes or create organisms with novel suites of traits, scientists can perform genetic crosses, or the purposeful mating of two ...

drosophila-melanogaster-embryo-and-larva-harvesting-and-preparation

Drosophila melanogaster Embryo and Larva Harvesting and Preparation

Drosophila melanogaster embryos and larvae are easy to manipulate and develop rapidly by mechanisms that are analogous to other organisms, including ...

Genetic Engineering of Model Organisms

Transgenesis, or the use of genetic engineering to alter gene expression, is widely used in the field of developmental biology. Scientists use a number of ...

electrophoretic-mobility-shift-assay-emsa

Electrophoretic Mobility Shift Assay (EMSA)

The electrophoretic mobility shift assay (EMSA) is a biochemical procedure used to elucidate binding between proteins and nucleic acids. In this assay a ...

Construct an explanation based on evidence for how the structure of DNA determines the structure of proteins which carry out the essential functions of life through systems of specialized cells.

HS-LS1-1.

Just-noticeable Differences

Description

Transcript

Tags

More videos by Standards