Name: using electrode potentials to predict reactions
Uploaded: 2020-09-24T15:06:52.000Z
Duration: 3 min 2 s
Channel: JoVE

Consider two containers having different fluid levels. When connected, the liquid flows from the higher to the lower level. By measuring the individual fluid levels, the flow direction can be predicted. 
Comparatively, in a galvanic cell, knowing individual electrode potentials helps predict the oxidant, reductant, and flow of electrons. Here, each half-cell has its corresponding electrode potential. However, the individual electrode potential cannot be measured directly but only the potential difference between the two half-cells. So how is it calculated?
To determine individual electrode potentials, one electrode is assigned a potential of zero, and the other electrode&#8217;s potentials are measured relative to it.
The electrode with a potential of zero is the hydrogen electrode under standard-state conditions, also called the standard hydrogen electrode, or SHE. The SHE is operated at 25 &#176;C, consisting of an inert platinum electrode partially submerged in 1 molar hydrochloric acid and exposed to a stream of hydrogen gas at 1 atmosphere.
When a zinc electrode is connected to the SHE, its mass reduces, indicating its oxidation to Zn2+ ions. Simultaneous increased production of hydrogen gas signifies a reduction of hydrogen ions. 
Thus, zinc is the anode, and SHE the cathode. Zinc&#8217;s standard electrode potential of &#8722;0.76 V indicates a greater oxidative potential than the SHE.
However, when a copper electrode is connected to the SHE, its mass increases as Cu2+ is reduced to copper. Hence, copper is the cathode, and SHE the anode. Copper&#8217;s standard reduction potential of +0.34 V indicates a greater reductive potential than the SHE.
Standard electrode potentials provide a measure of oxidations or reductions to occur&#8212;the more positive, the greater the tendency for a reduction under standard conditions.
A redox reaction&#8217;s direction and spontaneity are determined by examining the individual standard electrode potentials.
A positive summation of the electrode potentials implies a spontaneous reaction. Thus, for a copper-zinc galvanic cell with zinc as the anode and copper as the cathode and a cell potential of +1.10 V, both half-cell reactions occur spontaneously in the forward direction.
Lastly, the standard electrode potential is an intrinsic property and unaffected by any change in the half-reaction stoichiometry.

standard electrode potentials

On comparing the reactivity of silver and lead, it is observed that the two ionic species, Ag+ (aq) and Pb2+ (aq), show a difference in their redox reactivity towards copper: the silver ion undergoes spontaneous reduction, while the lead ion does not. This relative redox activity can be easily quantified in electrochemical cells by a property called cell potential. This property is commonly known as cell voltage in electrochemistry, and it is a measure of the energy which accompanies the charge transfer. Potentials are measured using the SI unit Volts, defined as one joule of energy per one coulomb of charge. Thus,
<img alt="Chromatography process diagram illustrating DNA separation using stationary and mobile phases." src="/files/ftp_upload/11435/11435_Equation_1.png" style="text-align: center; height: 70px;" data-altupdatedat="1761830439000" data-alt="Eq1" />
Standard Electrode Potential
When measured for electrochemical purposes, the cell potential is a measure of the driving force for a specific type of charge transfer processes, namely, the electron transfer between reactants. The potential of a single electrode or a single half-cell cannot be measured as electron transfer requires a donor and recipient or a reductant and an oxidant, respectively. Instead, a half-cell potential can only be measured relative to another half-cell. Thus, it is only possible to measure the difference in potential between two half-cells, Ecell, which is defined as
<img alt="Chemical structure of Quercetin; flavonoid compound diagram for antioxidant studies, C15H10O7." src="/files/ftp_upload/11435/11435_Equation_2.png" style="text-align: center; height: 50px;" data-altupdatedat="1761830439000" data-alt="Eq2" />
where Ecathode and Eanode represent the potentials of two different half-cells functioning as cathode and anode, respectively. The standard cell potential, E&#176;cell, is the cell potential measured at standard-state conditions of both half-cells ( i.e., 1 M concentrations, 1 bar pressures, 298 K)
<img alt="Free body diagram with forces: F, T, W, g, m, &#952;; static equilibrium; &#931;Fx=0, &#931;Fy=0 analysis." src="/files/ftp_upload/11435/11435_Equation_3.png" style="text-align: center; height: 50px;" data-altupdatedat="1761830439000" data-alt="Eq3" />
To easily calculate half-reaction potentials, the scientific community has designated one particular half-cell to serve as a universal reference for all cell potential measurements, with a potential of 0 V. This half-cell is known as the standard hydrogen electrode (SHE), and it is based on the half-reaction below:
<img alt="Ball-and-stick diagram of benzene, C6H6, illustrating chemical structure and aromaticity." src="/files/ftp_upload/11435/11435_Equation_4.png" style="text-align: center; height: 50px;" data-altupdatedat="1761830439000" data-alt="Eq4" />
Typically, SHE consists of an inert platinum electrode which is immersed in 1 M aqueous H+, with a stream of bubbling H2 gas at 1 bar pressure, maintained at a uniform temperature of 298 K. The electrode potential (EX) for a half-cell X is thus defined as the potential measured for a cell X, which acts as a cathode, while the SHE acts as an anode.
<img alt="Chromatography process diagram, illustrating sample separation through a column system." src="/files/ftp_upload/11435/11435_Equation_5.png" style="text-align: center; height: 70px;" data-altupdatedat="1761830439000" data-alt="Eq5" />
Therefore,
<img alt="Torque equilibrium, &#931;&#964;=0; see-saw diagram illustrates rotational balance in static equilibrium." src="/files/ftp_upload/11435/11435_Equation_6.png" style="text-align: center; height: 50px;" data-altupdatedat="1761830439000" data-alt="Eq6" />
Under standard-state conditions, the potential of the half-cell X is equal to the standard electrode potential, E&#176;X. As the definition of cell potential requires the half-cells to function as cathodes, these potentials are also called standard reduction potentials.
Prediction of Spontaneity and the Direction of a Redox Reaction
The cell and electrode potentials dictate the spontaneity of redox reactions. It is observed that the spontaneous reactions show a positive cell potential, while the nonspontaneous process shows a negative cell potential. If the summation of the electrode potentials is positive, the reaction is said to be spontaneous. Half-cell reactions having positive electrode potential occur in the forward direction, while those with values lesser than the hydrogen electrode usually occur in the reverse order.
A stronger oxidant exhibits greater standard electrode potential, E&#176;. As electrode potentials measure reduction capacity, an increased E&#176; corresponds to an increased driving force behind the reduction of the species and better oxidizing abilities. Thus, E&#176;cell is positive when E&#176;cathode &#62; E&#176;anode.
Considering this, it explains why copper is oxidized by silver, but not by lead:
<img alt="Chromatography diagram, amino acid separation, illustrating retention mechanism in a chromatography column." src="/files/ftp_upload/11435/11435_Equation_7v2.png" style="text-align: center; height: 125px;" data-altupdatedat="1761830439000" data-alt="Eq7" />
Prediction of Dissolution of Metal in Mineral Acids
One of the essential applications of the half-cell potentials is understanding whether a particular metal will dissolve in mineral acid. Most acids like hydrochloric acid dissolve metals by the reduction of protons to hydrogen gas and oxidation of metals to their respective ions. In the case of zinc reacting with hydrochloric acid, the reaction is spontaneous as the standard electrode potential of zinc is lower than that of hydrogen. However, copper does not react with hydrochloric acid on account of its higher electrode potential.
This text is adapted from <a href="https://openstax.org/books/chemistry-2e/pages/17-3-electrode-and-cell-potentials">OpenStax, Chemistry 2e, Section 17.3: Electrode and Cell Potentials. </a>

Standard Electrode Potentials

On comparing the reactivity of silver and lead, it is observed that the two ionic species, Ag+ (aq) and Pb2+ (aq), show a difference in their redox ...

Education

JoVE Core

Chemistry

Electrochemistry

KEY TERMS AND CONCEPTS

using electrode potentials to predict reactions

Electrode potentials help predict whether a redox reaction will happen on its own. A redox reaction involves electron transfer. In electrochemistry, the measured value is called cell potential or cell voltage. It shows the energy linked to charge transfer and is measured in volts, where 1 volt equals 1 joule per coulomb.

A single half-cell cannot be measured by itself because electron transfer needs both a donor and a receiver. For that reason, scientists measure the difference between two half-cells. The cell potential, Ecell, is defined from the cathode and anode potentials, and the standard cell potential, E°cell, is taken under standard conditions of 1 M concentration, 1 bar pressure, and 298 K.

To compare half-cells, chemistry uses the standard hydrogen electrode, or SHE, as a zero-volt reference. The SHE uses an inert platinum electrode in 1 M aqueous H+ with hydrogen gas bubbling at 1 bar and 298 K. A half-cell X is measured against the SHE when X acts as the cathode. Under standard conditions, this gives the standard electrode potential, E°X. These values are also called standard reduction potentials because the half-cell is written as a reduction.

The sign of the potential helps show the direction of a redox reaction. A spontaneous reaction has a positive cell potential, while a nonspontaneous one has a negative cell potential. When the sum of the electrode potentials is positive, the reaction is spontaneous. Half-cell reactions with positive electrode potential tend to go forward, and reactions with values below the hydrogen electrode usually go in reverse. A stronger oxidant has a larger standard electrode potential because it has a greater drive to gain electrons.

This idea explains why silver ions and lead ions behave differently toward copper. Silver ion, Ag+ (aq), is reduced spontaneously, but lead ion, Pb2+ (aq), is not. It also helps explain metal dissolution in mineral acids such as hydrochloric acid. These acids dissolve metals by reducing protons to hydrogen gas and oxidizing the metal to its ions. Zinc reacts spontaneously with hydrochloric acid because its standard electrode potential is lower than hydrogen’s, while copper does not react because its electrode potential is higher.

Using Electrode Potentials to Predict Reactions

using-electrode-potentials-to-predict-reactions

balancing redox equations

Redox Reactions and Half-Reaction Balancing

Redox reactions involve electron transfer and changes in oxidation number. In electrochemistry, these reactions connect chemical changes with electrical energy. They also power technologies such as industrial metal processing and rechargeable batteries used in electric vehicles. Oxidation number is a way to track how an atom's electronic environment changes compared with the pure element, where the oxidation number is zero. For a simple ionic compound, the oxidation number matches the ion...

electromotive force

Cell Voltage and Electron Flow

Electric current is the flow of electric charge through a conducting medium or a solution. In wires, that charge is carried by electrons. In some solutions, ions can also move and carry charge. When electrons move through a wire, they produce an electric current. This idea connects to redox reactions, where electrons are lost and gained. In the spontaneous reaction between zinc and copper ions, zinc is oxidized to zinc ions. Copper ions are reduced to solid copper. Even so, this direct...

voltaic/galvanic cells

Galvanic Cells and Battery Reactions

Galvanic cells use spontaneous redox reactions to produce electric current. A common example is a disposable AA battery, which powers devices by turning chemical energy into electrical energy. Another example is a copper wire placed in silver nitrate solution, where the solution slowly turns bright blue and a grey solid forms on the wire. In the copper and silver reaction, copper is oxidized and silver ions are reduced. Copper forms cuprous ions, which give the solution its blue color. At the...

Electrode potentials help predict whether a redox reaction will happen on its own. A redox reaction involves electron transfer. In electrochemistry, the measured value is called cell potential or cell voltage. It shows the energy linked to charge transfer and is measured in volts, where 1 volt equals 1 joule per coulomb. A single half-cell cannot be measured by itself because electron transfer needs both a donor and a receiver. For that reason, scientists measure the difference between two...

cell potential and free energy

Redox Cell Potential, ΔG°, and K

Redox cell potential connects chemical energy, free energy change, and the equilibrium constant in an electrochemical cell. In these reactions, chemical energy is converted into electrical energy. That link helps predict whether a reaction is spontaneous and how far it may proceed. Thermodynamics is the study of how heat and other forms of energy are related. In an electrochemical cell, cell potential can also reflect oxidizing strength or reducing strength. A similar idea appears in acid-base...

the nernst equation

Cell Potential Under Changing Conditions

Cell potential changes when a redox reaction does not run at standard conditions. Standard cell potentials connect with standard free energy change, ΔG°, and the equilibrium constant K, but those relationships only hold at 1 M concentration, 298 K, and 1 atmosphere. A zinc(II) and tin(II) redox cell with E°cell = +0.291 V and ΔG° = −56.2 kJ is spontaneous under those standard conditions. As a cell discharges, the reactant concentration changes and the cell potential steadily drops. Many redox...

concentration cells

Cell Potential from Concentration Differences

Concentration cells are voltaic cells that use two almost identical half-cells. The half-cells use the same electrode and the same half-reaction. They differ only in the concentration of one redox species, so the cell potential depends on that concentration difference. In a concentration cell, the Nernst equation can be used to find the cell potential. For the zinc example shown, the calculated cell potential is positive. A positive cell potential means the overall reaction is spontaneous. <br...

batteries and fuel cells

Primary, Rechargeable Batteries and Fuel Cells

Batteries and fuel cells are galvanic cells that supply electrical power for many applications. They range from tiny button batteries in wristwatches to large systems that can provide backup energy to municipal power grids. Some are primary cells, which are single-use and cannot be recharged. Others are secondary cells, which use reversible reactions and can be charged again by an external power source. A common primary battery is the dry cell. It uses zinc as both the container and the anode,...

corrosion

Rusting and Metal Protection

Corrosion is the natural breakdown of metals through electrochemical reactions. It can appear as rust on iron, tarnish on silver, or a blue-green patina on copper. In each case, the metal is oxidized. Some corrosion products can protect the surface, while others keep damaging the metal. Rusting is the harmful type of corrosion seen in iron. It happens when iron is exposed to oxygen and water. A galvanic cell forms on the iron surface, and this drives oxidation at the anodic region and...

electrolysis

Electrolysis in Batteries and Metal Production

Electrolysis uses electrical energy to drive a nonspontaneous redox reaction. In a galvanic cell, a spontaneous redox reaction does electrical work on the surroundings by sending electrons through an external circuit. In electrolysis, an external circuit does work on the redox system by applying a voltage large enough to force the reaction in the opposite direction. This process is used in several real-world settings. Recharging a battery is one example, because an outside power source drives...

key terms and concepts

Learn how electrode potentials and the standard hydrogen electrode help predict spontaneous redox reactions, metal reactivity, and whether metals dissolve in acid.

Using Electrode Potentials to Predict Reactions | JoVE K12

chemistry

JoVE Core Chemistry brings general chemistry concepts to life using concise and easy-to-understand animated video lessons. Plus, in the scientist-in-action videos, we demonstrate classical and original research experiments performed in today's laboratories worldwide.

Using Electrode Potentials to Predict Reactions

Description

Transcript

Tags