Name: how molecular structure shapes uv-vis bands
Uploaded: 2024-12-05T18:32:04.000Z
Duration: 1 min 30 s
Channel: JoVE

The UV&#8211;visible spectrum is the plot of absorbance versus wavelength. However, according to the Beer-Lambert law, absorbance is directly proportional to molar absorptivity, &#603;. So, the UV&#8211;visible spectrum is typically replotted with log &#603; on the y-axis and wavelength on the x-axis.
The wavelength at which the molecule has maximum absorbance is called &#955;max. As absorption occurs over a broad range of wavelengths, the absorption peak is often called a band.
To obtain a fine absorption band, the solvent used in UV&#8211;visible spectroscopy should not be absorbed in the region under investigation. It should also be nonpolar and not form hydrogen bonds with the solute because this promotes the formation of solute-solvent complexes.
Consider the UV&#8211;visible spectrum of benzoic acid in cyclohexane solvent. On passing UV radiation, the electrons excite from the HOMO to the LUMO by absorbing radiation over a range of wavelengths, with absorption bands at &#955;max values of 230, 272, and 282 nanometers.
The log &#603; values corresponding to these wavelengths are 4.2, 3.1, and 2.9, respectively, indicating strong absorptions, with the maximum absorption occurring at&#160; 230 nanometers.

uv&ndash;vis spectrum

UV&ndash;Vis Spectrum

When light passes through a substance, a portion of the light is absorbed while the remaining light is reflected or transmitted. If the molecule absorbs light between the wavelengths of 180&#8211;400 nm range, the UV spectrum is obtained, and if it absorbs light in the 400&#8211;780 nm wavelength range, the visible spectrum is obtained.&#160;&#160;&#160;&#160;&#160;
The UV&#8211;Vis spectrum of a molecule is the plot of its absorbance versus wavelength. The plot is drawn by taking molar absorptivity (&#949;) or log &#949; on the y-axis (ordinate) and wavelength on the x-axis (abscissa). Absorbance values represent light absorption by the molecule and cannot exceed 100 percent. When the absorbance is plotted against wavelength, the wavelength at which the molecule shows the maximum absorbance is called &#955;max. Since absorption occurs at a broad wavelength, it is often called an absorption band rather than a single peak.
Peaks in the UV&#8211;Vis spectrum vary in height and width based on molecular structure, electronic transitions, and solvent interactions.
<ol style="list-style-type: circle;">
	<li>Molecular Structure: Different structures, like conjugated double bonds (alternating single and double bonds), have smaller energy gaps between their molecular orbitals. This means they absorb light at longer wavelengths, often in the visible range. As a result, the structure of the molecule can shift the peak to higher or lower wavelengths and change its intensity.</li>
	<li>Electronic Transitions: Various electron transitions (e.g., &#960; &#8594; &#960;*, n &#8594; &#960;*) absorb light differently, influencing peak strength. Molecules with &#960; (pi) bonds or nonbonding (n) electron pairs can exhibit multiple types of transitions, leading to different peaks or bands in the spectrum.</li>
	<li>Solvent Effects:&#160; The solvent in which the molecule is dissolved can also affect the spectrum. When a molecule interacts with a solvent, it can alter the molecule&#39;s electronic environment, sometimes stabilizing or destabilizing certain molecular orbitals. This solvent effect can cause shifts in the peak position and may alter the peak&#39;s intensity.</li>
</ol>
These factors often result in broadened bands instead of single peaks, reflecting the molecule&#39;s complex behavior in different conditions.

When light passes through a substance, a portion of the light is absorbed while the remaining light is reflected or transmitted. If the molecule absorbs ...

Education

JoVE Core

Analytical Chemistry

Unit 1

Introduction to Molecular Spectroscopy

KEY TERMS AND CONCEPTS

how molecular structure shapes uv-vis bands

UV-Vis spectroscopy shows how a molecule absorbs light in the ultraviolet and visible ranges. When light passes through a substance, some of it is absorbed and the rest is reflected or transmitted. Molecules that absorb between 180 and 400 nm give a UV spectrum, while absorption in the 400 to 780 nm range gives a visible spectrum.

A UV-Vis spectrum is a plot of absorbance versus wavelength. The y-axis shows molar absorptivity, ε, or log ε, and the x-axis shows wavelength. Absorbance describes how much light a molecule absorbs, and it cannot exceed 100 percent. The wavelength with the highest absorbance is called λ max.

The absorption is usually broad, so it is often called an absorption band rather than a single peak. The height and width of these bands can change with molecular structure, electronic transitions, and solvent interactions. For example, conjugated double bonds, which are alternating single and double bonds, have smaller energy gaps between molecular orbitals. This can shift absorption to longer wavelengths, often into the visible range.

Electronic transitions also affect the spectrum. Common examples include π to π* and n to π* transitions. Molecules with π bonds or nonbonding n electron pairs can show more than one type of transition, which leads to different peaks or bands.

The solvent can change the UV-Vis spectrum as well. When a molecule interacts with a solvent, its electronic environment can change. This may stabilize or destabilize molecular orbitals, which can shift the peak position and alter its intensity. These effects often make the bands broader and show how the molecule behaves under different conditions.

How Molecular Structure Shapes UV-Vis Bands

how-molecular-structure-shapes-uv-vis-bands

dual nature of electromagnetic (em) radiation

dual-nature-of-electromagnetic-em-radiation

EM Spectrum, Waves, and Photon Energy

Electromagnetic radiation has both wave and particle features. It includes electric and magnetic field components that oscillate in planes perpendicular to each other. These fields are also perpendicular to the direction the radiation moves through space. As a wave, electromagnetic radiation is described by wavelength and frequency. Wavelength is the distance between two consecutive peaks or troughs. Frequency is the number of wave cycles that pass a point in a fixed time. The electromagnetic...

interaction of em radiation with matter: spectroscopy

interaction-of-em-radiation-with-matter-spectroscopy

EM Radiation and Matter in Spectroscopy

Electromagnetic radiation and matter interact in ways that reveal details about atoms and molecules. In spectroscopy, scientists study how EM radiation is absorbed, emitted, transmitted, reflected, or scattered by a substance. This helps identify its chemical composition and properties. EM radiation behaves as both a wave and a particle. As a wave, it has intensity and amplitude. Intensity, also called irradiance, is the number of photons that strike a given area in a certain time. Amplitude...

molecular spectroscopy: absorption and emission

molecular-spectroscopy-absorption-and-emission

Molecular Energy Levels in Spectroscopy

Molecular spectroscopy describes how molecules absorb and emit light by moving between energy levels. These levels are called quantum states. Unlike atoms, molecules also have rotational and vibrational energy levels, so their energy structure is more complex. Each level is separated by an energy gap. The gaps between electronic, vibrational, and rotational levels are very different in size. A diatomic molecule can be used to show these three kinds of energy levels. A molecule can absorb a...

spectrophotometry: introduction

Spectrophotometry for Absorption Spectra

Spectrophotometry measures how a material absorbs, reflects, diffracts, or transmits electromagnetic radiation. It compares the intensity of radiation before and after it interacts with the material. The result shows how the material responds to different wavelengths. A spectrophotometer is the device used for this measurement. It includes a source of electromagnetic radiation, a slot for the sample, and a detector. The detector measures the radiation that leaves the material, including...

ultraviolet and visible (uv&ndash;vis) spectroscopy: overview

ultraviolet-and-visible-uvvis-spectroscopy-overview

UV-Vis Spectroscopy for Light Absorption

UV-Vis spectroscopy measures how materials absorb ultraviolet and visible light. It is a useful analytical method because it is versatile, simple to use, and gives results quickly. Scientists use it for both qualitative and quantitative analysis. When UV-Vis radiation passes through a sample, molecules absorb specific wavelengths based on the energy needed for electronic transitions. This absorption moves atoms or molecules from a ground state to an excited state. If a molecule absorbs UV...

uv&ndash;vis spectroscopy: molecular electronic transitions

uvvis-spectroscopy-molecular-electronic-transitions

UV-Vis Spectroscopy and Molecular Absorption

UV-Vis spectroscopy shows how molecules absorb ultraviolet and visible light. It is used to study electronic structure by tracking how electrons move between molecular orbitals. The absorbed light must match the energy gap between the ground state and an excited state. In this process, an electron moves from the highest occupied molecular orbital, or HOMO, to the lowest unoccupied molecular orbital, or LUMO. This jump raises the electron to a higher energy level. The energy difference between...

uv&ndash;vis spectrometers

UV-Vis Spectrophotometer Parts and Samples

A UV-visible spectrophotometer measures how much UV and visible light a sample absorbs. It uses a light source, a wavelength selector, a sample holder, and a detector to build the spectrum. This makes it useful for checking liquid samples in the lab. The light source depends on the region being measured. A deuterium lamp provides UV radiation, and a tungsten lamp provides visible radiation. A monochromator or prism acts as a diffraction grating and splits the incoming light into different...

UV-Vis spectroscopy shows how a molecule absorbs light in the ultraviolet and visible ranges. When light passes through a substance, some of it is absorbed and the rest is reflected or transmitted. Molecules that absorb between 180 and 400 nm give a UV spectrum, while absorption in the 400 to 780 nm range gives a visible spectrum. A UV-Vis spectrum is a plot of absorbance versus wavelength. The y-axis shows molar absorptivity, ε, or log ε, and the x-axis shows wavelength. Absorbance describes...

uv&ndash;vis spectroscopy: beer&ndash;lambert law

Using Absorbance to Find Concentration

The Beer-Lambert law links absorbance, concentration, and path length in a solution. It is based on ideas from Johann Heinrich Lambert and August Beer. Their work helps explain how light changes as it passes through a medium. Lambert's law says that when light passes through a medium, the loss in intensity is directly proportional to the original intensity and the path length. Beer’s law adds that the transmittance of a solution stays constant if the product of concentration and path length...

photoluminescence: fluorescence and phosphorescence

photoluminescence-fluorescence-and-phosphorescence

Light Emission from Excited Molecules

Photoluminescence is light emission from molecules after they absorb light energy. A substance takes in photons, which raises electrons to excited energy levels. The electrons then relax back to the ground state and release light. This process appears in many materials, including semiconductors, organic compounds, and inorganic compounds. The main role of electron spin helps separate photoluminescence into fluorescence and phosphorescence. In a singlet spin state, two electrons share the same...

variables affecting phosphorescence and fluorescence

variables-affecting-phosphorescence-and-fluorescence

Factors That Change Light Emission in Molecules

Fluorescence and phosphorescence depend on several factors that change how molecules emit light. These effects matter in analytical chemistry, biological imaging, and materials science because they help scientists detect molecular properties and see cellular structures. Molecular structure is one of the main influences. Aromatic compounds with low-energy pi-bonding to pi-non-bonding transitions often give strong fluorescence. Aliphatic and alicyclic carbonyl compounds, as well as highly...

deactivation processes: jablonski diagram

Jablonski Diagram: Light Loss Pathways

Jablonski diagrams show how excited molecules lose energy after absorbing light. They are used to track both light-emitting and non-light-emitting steps in luminescence. The diagram gives a simple picture of the energy states a molecule can move through. The lowest line in a Jablonski diagram is the ground-state energy of the molecule. This state is usually a singlet state, and it represents the condition of most molecules in solution at room temperature. The lines above it show vibrational...

photoluminescence: applications

Fluorescent and Phosphorescent Analysis

Photoluminescence is useful in chemical analysis because it is sensitive and selective. It can support both direct and indirect measurements of an analyte, which is the substance being tested. When an analyte has a strong quantum yield, it can be measured directly by fluorescence or phosphorescence. Indirect analysis is used when the analyte is not naturally fluorescent or phosphorescent, or when its quantum yield is poor. One approach is to react the analyte with a reagent to make a...

fluorescence and phosphorescence: instrumentation

fluorescence-and-phosphorescence-instrumentation

Measuring Fluorescence and Phosphorescence

Fluorometers and spectrofluorometers are instruments used to measure molecular fluorescence. They do this by choosing specific excitation and emission wavelengths. The two instruments use different light sources and wavelength-selection methods. A fluorometer uses absorption interference filters to select the excitation and emission wavelengths. Its excitation source is usually a low-pressure mercury vapor lamp. This lamp gives intense lines across the ultraviolet and visible regions.

key terms and concepts

Learn how UV-Vis spectra are formed, what λ max means, and how structure, electronic transitions, and solvent effects change absorption bands.

How Molecular Structure Shapes UV-Vis Bands | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

How Molecular Structure Shapes UV-Vis Bands

Description

Transcript

Tags