Name: diamagnetism and magnetic repulsion
Uploaded: 2023-04-30T12:42:20.000Z
Duration: 1 min 26 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

NC K-12 Science Standard Course of Study

9-12

Physics

motion-and-stability-forces-and-interactions

Motion and Stability- Forces and Interactions

PS.Phy.5.1

Diamagnetism

An atom&#39;s net magnetic dipole moment is the vector sum of its orbital and the spin moment.
Materials consisting of atoms with paired electrons have zero net magnetic moments, and under an external magnetic field, moments opposite to the field are induced. Such materials are called diamagnets.
In an external magnetic field, an electron with angular velocity along the field direction experiences an inward Lorentz force, accelerating its motion. Thus, an additional current in the initial current direction induces a dipole moment opposite to the field direction.
Similarly, an electron with angular velocity opposite to the field experiences a deceleration due to the outward Lorentz force. The additional current is again clockwise, opposite to the initial current direction. The additional current results in a moment opposite to the field.&#160;
Thus, the induced moment is always directed opposite to the external field.
When placed in an external magnetic field, diamagnetic materials repel the magnetic field, and the relative permeability of diamagnets is less than unity. Hence, the susceptibility is negative and temperature independent for diamagnets.

diamagnetism

Materials consisting of paired electrons have zero net magnetic moments. However, when these materials are placed under an external magnetic field, the moments opposite to the field are induced. Such materials are called diamagnets. Diamagnetism is the response of the diamagnets when placed in an external magnetic field.
Diamagnetism was discovered by Anton Brugmans in 1778 when he observed that bismuth gets repelled by magnetic fields, thus theorizing that diamagnets get repelled by magnets. When placed under a non-uniform external magnetic field, diamagnets tend to move from the stronger to the weaker magnetic field region. Since diamagnets repel the magnetic field, their magnetic permeability is less than unity.
When a magnetic field is applied to a material, it gets magnetized. The applied field is generally expressed as magnetic field intensity. The resultant magnetic field is the sum of the applied magnetic field and the field due to the magnetization. The magnetization is very small and antiparallel to the applied magnetic field. The ratio of the magnetization to the magnetic field intensity is known as the susceptibility. The susceptibility for diamagnets is a minimal negative value of 10-5&#8211;10-6&#160;Since diamagnetism occurs due to the orbital motion of electrons independent of temperature, the susceptibility value is also temperature independent for diamagnets.
When placed in an external magnetic field, all materials have a diamagnetic contribution. For paramagnetic and ferromagnetic materials, the diamagnetic contribution is very small, and thus can be neglected.

Materials consisting of paired electrons have zero net magnetic moments. However, when these materials are placed under an external magnetic field, the ...

Education

JoVE Core

Unit 1

Sources of Magnetic Fields

KEY TERMS AND CONCEPTS

diamagnetism and magnetic repulsion

Diamagnetism is the magnetic response of materials that are repelled by an external magnetic field. These materials contain paired electrons, so they have no net magnetic moment at first. When a magnetic field is applied, moments opposite to the field are induced.

Anton Brugmans discovered this effect in 1778 after observing that bismuth is repelled by magnetic fields. He used this observation to suggest that diamagnets are pushed away from magnets. In a non-uniform magnetic field, diamagnets move from the stronger field region toward the weaker field region.

Diamagnets also have magnetic permeability less than unity because they oppose the applied field. When a magnetic field acts on any material, the material becomes magnetized. The applied field is usually described as magnetic field intensity, and the result is a total field made from the applied field plus the field created by magnetization.

In diamagnets, the magnetization is very small and points opposite to the applied field. The ratio of magnetization to magnetic field intensity is called susceptibility. For diamagnets, susceptibility is a small negative value, about 10^-5 to 10^-6.

This susceptibility does not change with temperature because diamagnetism comes from the orbital motion of electrons. When an external magnetic field is present, all materials show some diamagnetic contribution. In paramagnetic and ferromagnetic materials, that contribution is very small and can usually be ignored.

Diamagnetism and Magnetic Repulsion

biot-savart law

Magnetic Field from a Current Element

The Biot-Savart law links a current-carrying wire to the magnetic field it creates. It gives both the magnitude and the direction of that field. The law is named for Jean-Baptiste Biot and Félix Savart, who studied how a straight wire carrying current interacts with a permanent magnet. A current-carrying wire produces a magnetic field around it. To describe the field from a tiny section of wire, we use an infinitesimal current element, dl. The direction of dl follows the direction of the...

biot-savart law: problem-solving

Calculating Magnetic Fields with Biot-Savart

The Biot-Savart law is used to calculate the magnetic field made by a steady current. A mobile phone battery bank and the wire between the two can be used as an example of that current. At a field point P, the goal is to find the magnitude of the magnetic field created by the current in the wire. The first step is to look at a small current element of length dl. This element is at a distance r from the field point. The known values are the current, the length of the current element, the...

magnetic field due to moving charges

Magnetic Fields from Charges in Motion

A moving charge creates a magnetic field. For a point charge moving at constant velocity, the field at any point depends on the charge and the distance from the source point to the field point. It is directly proportional to the charge magnitude and inversely proportional to the square of that distance. The magnetic field also has a direction. Unlike the electric field, it is always perpendicular to the plane formed by the line from the source to the field point. Its strength depends on the...

magnetic field due to two straight wires

Net Magnetic Field at the Midpoint of Two Wires

Two parallel straight wires can create a net magnetic field at the point halfway between them. In this example, the wires carry currents of 10 A and 20 A and are separated by 20 cm. The midpoint, labeled P2, is 10 cm from each wire. The magnetic field lines around each wire form counterclockwise concentric circles. At the midpoint, the field from one wire can point in the opposite direction from the field from the other wire. The net magnetic field is found by magnetic field superposition,...

magnetic force between two parallel currents

magnetic-force-between-two-parallel-currents

Parallel Currents and the Pinch Effect

Parallel current-carrying wires can pull on each other with a magnetic force. The force has the same size on both conductors. Its direction depends on whether the currents flow in the same direction or in opposite directions. The magnetic field from one long, straight wire acts on a finite length of the other wire. The force on that wire comes from the product of its current and the cross product of its length vector with the field. Using the right-hand rule, the second conductor is pulled...

magnetic field of a current loop

Field Along the Axis of a Current Loop

A circular current loop creates a magnetic field along its axis. For a loop of radius a carrying current I, the field at a point P can be found with the Biot-Savart law. The point P lies a distance x from the center of the loop. The field from a tiny current element dl points at an angle θ. At every point on the loop, the current element and the unit vector toward P are perpendicular. Using that relationship and writing r in terms of x and a gives the size of the field from each element. The...

divergence and curl of magnetic field

Magnetic Field Loops and Ampere's Law

Magnetic field loops and Ampere's law describe how magnetic fields behave around current. For a volume current distribution, the magnetic field can be written using the Biot–Savart law. The divergence and curl of that field can then be found with vector analysis. To find the divergence, the divergence operator is applied to both sides of the Biot–Savart equation. After using the vector product rule, the integrand simplifies. The term with the curl of the current density becomes zero because...

ampere's law

Magnetic Circulation Around a Current

Magnetic circulation around a current is described by Ampère’s law. A static magnetic field is not conservative, unlike an electrostatic field. Instead, the magnetic field is linked to electric current, which is its source. Ampère’s law uses the line integral of the magnetic field around a closed path. This integral is proportional to the current enclosed by the loop. The law applies only when currents are steady and when no magnetic materials or time-varying electric fields are present. The...

ampere's law: problem-solving

Choosing an Amperian Loop for Magnetic Fields

Ampere's law connects a closed loop path with the current enclosed by that loop. The line integral of the magnetic field around the path equals the vacuum permeability times the enclosed current. A right-hand rule helps set the sign of the current. If the fingers curl with the integration path, the thumb gives positive current. Current opposite the thumb direction is negative. Solving magnetic field problems with Ampere's law starts by checking symmetry in the current distribution. If the...

solenoids

Solenoids as Controllable Electromagnets

A solenoid is a tightly wound coil of insulated conducting wire. It acts as an electromagnet, and its magnetic field comes from the combined field of each turn in the coil. In an ideal solenoid, the magnetic field inside is almost uniform and points along the solenoid axis. The magnetic field outside is nearly zero. Each turn can be treated as a circular current-carrying loop, and each loop creates a magnetic dipole moment. The dipole moment from one turn equals the current multiplied by the...

magnetic field of a solenoid

Solenoid Field Strength Example

A solenoid is a conducting wire coated with an insulating material and wound tightly into a helical coil. Its magnetic field comes from the vector sum of the fields from each turn. For an ideal solenoid, the field inside depends directly on the number of turns per unit length and the current. The magnetic field outside an ideal solenoid is zero. In this example, a solenoid has 100 turns wrapped around a cylinder that is 1 cm in diameter and 10 cm long. A current of 0.5 A is passed through the...

toroids

Toroid Magnetic Fields and Turn Count

A toroid is a donut-shaped coil made from a single conducting wire. It usually has many circular loops that sit perpendicular to its axis. When current flows through it, the magnetic field forms circular lines around the axis. The right-hand rule shows the field direction: curl the fingers of your right hand with the current, and your thumb points in the magnetic field direction. Inside a toroid, the magnetic field changes with distance from the axis. It varies inversely with that distance.

magnetic vector potential

Solenoid Vector Potential Explained

The magnetic vector potential can be used to describe the magnetic field inside an ideal solenoid. In magnetostatics, the magnetic field has zero divergence, so it can be written as the curl of a vector potential. This idea connects the magnetic field to a potential in the same way that electrostatics connects the electric field to an electric potential. For an ideal solenoid, the magnetic field inside is given by the vacuum permeability, the number of turns per unit length, and the current.

potential due to a magnetized object

Magnetization and Bound Currents

Magnetization describes how a magnetic material responds to an external magnetic field. In paramagnets and ferromagnets, magnetic dipoles align with the field. In diamagnets, the dipoles align opposite to the field. Magnetization is the dipole moment per unit volume, and it plays a role similar to polarization in electrostatics. The magnetic vector potential of a magnetized material can be written in terms of its aligned dipoles. This form is simplified with vector analysis. One term...

magnetostatic boundary conditions

Magnetic Fields at Material Interfaces

Magnetic fields change at the boundary between two magnetic materials, and the change depends on the surface conditions at the interface. A magnetic field can be discontinuous at a surface current, just as an electric field can change across a surface charge. The component of the magnetic field that points perpendicular to the boundary stays continuous. The component parallel to the boundary behaves differently. It becomes discontinuous by an amount equal to the vacuum permeability times the...

ampere's law in matter

Free Current and Magnetization in Ampere’s Law

Ampere’s law in matter links magnetic fields to the free current in a magnetized material. In such materials, the total current density has two parts. These are the free current density and the bound current density. The free current comes from the motion of free electrons inside the material. The bound current comes from the alignment of magnetic dipole moments. In vacuum, the differential form of Ampere’s law says that the curl of the magnetic field equals permeability times current density.

magnetic susceptibility and permeability

How Materials Respond to Magnetic Fields

Magnetic susceptibility and permeability describe how materials respond to a magnetic field. In linear magnetic materials, magnetization is proportional to the magnetic field intensity. The proportionality constant is magnetic susceptibility, which is a dimensionless number. The value of susceptibility depends on the material. Diamagnetic materials develop moments opposite to the applied field. Their susceptibility is slightly negative, usually about 10^-5 to 10^-6. This effect comes from the...

magnetic moment of an electron

Electron Spin and Bohr Magneton

Electrons create magnetic effects through both orbital motion and spin. When an electron moves around a nucleus, it acts like a tiny current loop. That current produces a magnetic dipole moment that is proportional to the electron's orbital angular momentum. The orbital angular momentum is quantized in units of the reduced Planck's constant. Because of that, the magnetic dipole moment is also quantized in the Bohr magneton. The Bohr magneton has a value of 9.27 x 10 -24 Am 2. Electrons also...

Diamagnetism is the magnetic response of materials that are repelled by an external magnetic field. These materials contain paired electrons, so they have no net magnetic moment at first. When a magnetic field is applied, moments opposite to the field are induced. Anton Brugmans discovered this effect in 1778 after observing that bismuth is repelled by magnetic fields. He used this observation to suggest that diamagnets are pushed away from magnets. In a non-uniform magnetic field, diamagnets...

paramagnetism

Paramagnetism and Magnetic Alignment

Paramagnetism and magnetic alignment explain how some materials respond to an outside magnetic field. Paramagnets contain unpaired electrons, so they have a finite magnetic moment. When no magnetic field is present, these moments point in random directions, and the net moment is zero. When an external field is applied, a torque acts on the magnetic moments and pulls them toward the field direction. At the same time, thermal motion of the electrons creates a competing torque that tries to...

ferromagnetism

Magnetic Domains and Hysteresis

Ferromagnetic materials like iron, nickel, and cobalt contain magnetic domains. Inside each domain, magnetic dipoles line up in the same direction. Quantum mechanical coupling keeps this alignment strong, so room-temperature thermal motion usually cannot break it. As a result, each domain has a net dipole moment. Some materials have weaker coupling and become ferromagnetic only at lower temperatures. When an external magnetic field is applied, the dipoles rotate to match the field. At the same...

key terms and concepts

Explore diamagnetism, including paired electrons, magnetic repulsion, bismuth, susceptibility, and why diamagnets move toward weaker field regions.

Diamagnetism and Magnetic Repulsion | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

Virginia  Standards of Learning

HIgh School

Physical Science

PS.9

PS.9.d

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Instantaneous Velocity - I

The average velocity during a time interval cannot tell us how fast or in what direction a particle is moving at any given time during the interval. To ...

Instantaneous Velocity - II

Instantaneous velocity is the quantity that measures how fast an object is moving along its path. In other words, the instantaneous velocity of an object ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

Kinematic Equations - I

When an object moves with constant acceleration, the velocity of the object changes at a constant rate throughout the motion. The kinematic equations of ...

Kinematic Equations - II

The second kinematic equation expresses the final position of an object in terms of its initial position, the distance traveled with the initial constant ...

Kinematic Equations - III

The first two kinematic equations have time as a variable, but the third kinematic equation is independent of time. This equation expresses final velocity ...

Kinematic Equations: Problem Solving

When analyzing one-dimensional motion with constant acceleration, the problem-solving strategy involves identifying the known quantities and choosing the ...

Free-falling Bodies: Introduction

All objects, neglecting air resistance, fall with the same acceleration towards the Earth&#39;s center due to the force exerted by the Earth&#39;s ...

Free-falling Bodies: Example

An object falling without any air resistance under the influence of gravitational force is said to be in free-fall. For free-falling bodies, the ...

velocity-and-position-by-graphical-method

Velocity and Position by Graphical Method

Velocity and position can be calculated from the known function of acceleration as a function of time. The total area under the acceleration-time graph ...

Velocity and Position by Integral Method

If acceleration as a function of time is known, then velocity and position functions can be derived using integral calculus. For constant acceleration, ...

Use models (graphs, equations, diagrams) to infer motion in one dimension.

PS.Phy.1.1

Position and Displacement Vectors

To describe the motion of an object, one should first be able to describe its position (where it is at any particular time). More precisely, the position ...

average-and-instantaneous-velocity-vectors

Average and Instantaneous Velocity Vectors

To calculate other physical quantities in kinematics, the time variable must be introduced. The time variable not only allows us to state where an object ...

Acceleration Vectors

In everyday conversation, accelerating means speeding up. Acceleration is a vector in the same direction as the change in velocity, &#916;v, therefore the ...

Direction of Acceleration Vectors

Acceleration occurs when velocity changes in magnitude (an increase or decrease in speed), direction, or both. Although acceleration is in the direction ...

Projectile Motion

An object thrown in the air follows a parabolic path under the influence of Earth&#39;s gravitational force. The motion of such an object is called ...

/files/media/science-education/science-education-thumbs/12634.jpg

Projectile Motion: Equations

Projectile motion is commonly observed in our day-to-day life. For example, a basketball thrown by a player, an arrow shot from a bow, and kids jumping ...

Projectile Motion: Example

The theory of projectile motion is very useful for players of several sports to improve their performance. For example, a javelin thrower needs to throw ...

principle-linear-impulse-momentum-for-single-particle-problem

Principle of Linear Impulse and Momentum for a Single Particle: Problem Solving

Consider a massless pulley system consisting of a wooden box and a cylinder of known masses. Determine the speed of the attached objects at a specific ...

Non-uniform Circular Motion

In&#160;uniform circular motion, the particle executing circular motion has a constant speed, and the circle is at a fixed radius. However, not all ...

Relative Velocity in One Dimension

The understanding of the concept of reference frames is essential to discuss relative motion in one or more dimensions. When we say that an object has a ...

Relative Velocity in Two Dimensions

Relative velocity is the velocity of an object as observed from a particular reference frame, or the velocity of one reference frame with respect to ...

Use models (graphs, equations, diagrams) to infer motion in two dimensions.

PS.Phy.1.2

Force

Forces affect every moment of our life. Our bodies are held to the Earth by force, and they are held together by the forces of charged particles. When we ...

Types of Forces

In most situations, forces can be grouped into two categories: contact forces and field forces.&#160; Contact forces occur as a result of direct physical ...

Drawing Free-body Diagrams: Rules

The first step in describing and analyzing most phenomena in physics involves the careful drawing of a free-body diagram. Free-body diagrams are useful in ...

Free Body Diagrams: Examples

Solving problems that involve forces is easy using free-body diagrams. A free-body diagram is a sketch showing all the external forces that are acting on ...

Use free body models to qualitatively and quantitatively analyze systems of forces in one dimension and two dimensions.

PS.Phy.2.1

Newton's First Law: Introduction

Motion draws our attention. Motion itself can be beautiful, causing us to marvel at the forces needed to create spectacular sights, such as that of a ...

Newton's First Law: Application

Experience suggests that an object at rest remains at rest if left alone, and that an object in motion tends to slow down and stop unless some effort is ...

Internal and External Forces

Newton&#39;s first law states that a net external force causes a change in motion. External forces act on an object or system, originating outside of the ...

Newton's Second Law

Newton&#39;s second law is closely related to his first law of motion. It mathematically gives the cause-and-effect relationship between force and changes ...

Mass and Weight

Mass and weight are often used interchangeably in everyday conversation. For example,&#160; medical records often show our weight in kilograms, but never ...

Weightlessness

When an object is dropped, it accelerates toward the center of the Earth. If the net external force on the object is its weight, it is said to be in free ...

Apparent Weight

True weight is the measure of the gravitational force acting on an object. However, if the object accelerates, its measured weight is different from its ...

/files/media/science-education/science-education-thumbs/14695.jpg

Newton's Third Law: Introduction

Whenever one body exerts a force on a second body, the first body experiences a force equal in magnitude and opposite in direction, to the force that it ...

Newton's Third Law: Examples

Newton&#39;s third law states that every action has an equal and opposite reaction. Consider a swimmer pushing off the side of a pool. They push against ...

first-law-particles-in-one-dimensional-equilibrium

First Law: Particles in One-dimensional Equilibrium

Newton&#39;s first law of motion states that a body at rest remains at rest, or if in motion, remains in motion at constant velocity, unless acted on by a ...

first-law-particles-in-two-dimensional-equilibrium

First Law: Particles in Two-dimensional Equilibrium

Recall that a particle in equilibrium is one for which the external forces are balanced. Static equilibrium involves objects at rest, and dynamic ...

Second Law: Motion under Same Force

Newton&#39;s laws can be applied to bodies at rest and bodies in motion. Newton&#39;s first law is applied to bodies in equilibrium, whereas the second ...

second-law-motion-under-same-acceleration

Second Law: Motion under Same Acceleration

Newton&#39;s second law of motion applies to bodies moving under the same acceleration. For example, when a baggage tractor pulls luggage carts, each cart ...

Drag Force and Terminal Speed

An interesting force in everyday life is the force of drag on an object when it is moving in a fluid. Like friction, the drag force always opposes the ...

/files/media/science-education/science-education-thumbs/14697.jpg

Tension

Tension is a force along the length of a medium, in particular, a force carried by a flexible medium, such as a rope or cable. The word &#34;tension&#34; ...

/files/media/science-education/science-education-thumbs/14698.jpg

Carry out investigations to explain the interactions of forces on an object according to Newton's Laws of Motion.

PS.Phy.2.2

Frictional Force

When a body is in motion, it encounters resistance because the body interacts with its surroundings. This resistance is known as friction, a common yet ...

Use models to qualitatively and quantitatively analyze basic forces related to movement of an object in a circular path (centripetal force).

PS.Phy.2.3

Analyze the motion of objects using time, distance, displacement, speed, velocity, and acceleration.

Diamagnetism and Magnetic Repulsion

Description

Transcript

Tags

More videos by Standards