Name: peripheral venous cannulation
Uploaded: 2023-04-30T06:45:40.000Z
Duration: 7 min 51 s
Channel: JoVE

K12 Standards

new-york-state-science-learning-standards

New York State Science Learning Standards

High School

Life Science

Structure and Function

HS-LS1-3.

Peripheral Venous Cannulation

1. Have the equipment ready.
The equipment needed for peripheral venous cannulation includes:
<ol>
	<li>Gloves</li>
	<li>Rubber tourniquet</li>
	<li>Chlorhexidine or alcohol swabs</li>
	<li>Combined catheter and needle mechanism</li>
	<li>IV set of tubing and bags</li>
	<li>Adhesive tape only or tape and clear adhesive dressing</li>
	<li>2x2 or 4x4 inch gauze</li>
	<li>Normal saline 5 cc syringe for flush</li>
	<li>10 cc syringes for blood samples for lab examinations if needed</li>
</ol>
2. Familiarize yourself with the combined catheter and needle mechanism prior to placing the catheter for the first time. Catheters are packaged pre-threaded over needles; many have a safety mechanism in place that will automatically retract the needle and prevent a sharps exposure. When placing the IV, the catheter and needle are inserted together; then, the catheter is advanced and the needle withdrawn.
3. Select your catheter size based on the patient and the reason for IV therapy.
Catheters range in size from 14 gauge (the largest) to 24 gauge (for pediatric patients). Catheters are color coded to allow for easy identification and selection.
<ol>
	<li>Select an average adult-size catheter&#8212;18 or 20 gauge for the majority of adult patients. For pediatric patients or adult patients with small vein size, 22 or 24 gauge catheters are used.</li>
	<li>Choose a larger catheter, such as 14 or 16 gauge, if the patient requires large amounts of fluid or blood. &#34;Short and fat&#34; catheters provide a patient with the most rapid resuscitation.</li>
	<li>Bring a few different sizes to the bedside when preparing, as vein size might be difficult to predict prior to tourniquet placement.</li>
</ol>
4. Preparation for the procedure
<ol>
	<li>Wash your hands and wear non-sterile gloves.</li>
	<li>Explain the procedure to the patient.</li>
	<li>Position the patient with the arm extended and straight.</li>
	<li>Place the tourniquet on the upper portion of the arm and tie it tightly: cross the ends over each other and tuck in one of the ends rather than making a knot. This ensures that the tourniquet can be easily removed after the vein has been accessed.</li>
</ol>
5. Choosing an insertion site
<ol>
	<li>Feel and look for a &#34;good&#34; vein for placement of the catheter. This is the most challenging part of the procedure.
	<ol>
		<li>Start the process of vein identification in the antecubital fossa, where vessels are largest, and then work your way down the arm.
		<ol>
			<li>Feel for a vein by palpating for a &#34;squishy&#34; or &#34;springy&#34; area on the patients arm.</li>
			<li>Look for a vein by inspecting the patient&#39;s skin. Veins appear blue or gray in color. Patients who have darker skin coloring might have veins that are challenging to visualize.</li>
		</ol>
		</li>
		<li>If no vessel is identified in the antecubital fossa, work your way more distally to look for a vessel. You may need to reapply the tourniquet on the forearm for placement of an IV in the hand. Since all patients have different anatomies and varying medical histories, the best vessel for catheter placement will be different.</li>
		<li>After you select which vein to use, select and unwrap the appropriately sized catheter.</li>
	</ol>
	</li>
</ol>
6. Cleaning and prepping the skin
This step is important to decrease the rate of infection associated with peripheral IV placement.
<ol>
	<li>Use a chlorhexidine skin prep or alcohol swab to thoroughly clean a broad area around the vein, in case the first attempt is not successful and the needle needs to be inserted into the skin in multiple locations.</li>
	<li>After cleaning the skin, allow the area to dry completely, to ensure most effective infection prevention.</li>
</ol>
7. Inserting the catheter
<ol>
	<li>Using the non-dominant hand pull the skin taut from the inferior/distal portion of the insertion site. This is done in order to prevent the vein from &#34;rolling&#34; or moving during the procedure.</li>
	<li>Be sure to tell the patient to expect to feel a stick, and to keep the arm very still.</li>
	<li>Remove the cannula cover.</li>
	<li>Insert the needle at an angle of about 45 degrees to the skin with the bevel facing up. People have different ways of holding the catheter, but most hold it between the index finger and thumb.</li>
	<li>Insert the needle slowly to ensure that you do not go through the vessel.</li>
	<li>Expect to meet a small amount of resistance when poking the needle through the skin.</li>
	<li>After the needle is inserted into the skin, watch the hub of the catheter/needle device for a &#34;flash&#34; of blood.</li>
	<li>Once a small amount of blood is seen in the needle hub, advance a small bit more (a few mm), slightly lower your needle/catheter mechanism and begin to advance the catheter portion. Reduce the angle of insertion to prevent puncturing the posterior wall of the vessel.</li>
	<li>Advance the plastic catheter fully into the vessel while holding the needle still.</li>
	<li>Remove the tourniquet from the extremity. If blood is being drawn at the same time as IV placement, the tourniquet should stay on to facilitate that process.</li>
	<li>To prevent blood spilling from the vein, place one or two gauze pieces just underneath the hub of the catheter before removing the needle (or safety mechanism located at the hub), and apply gentle pressure on the proximal portion of the catheter that is in the vessel.</li>
	<li>Carefully remove the needle and place it promptly in a sharps container to prevent needle sticks.</li>
</ol>
8. Placing the tubing hookup and securing the line
<ol>
	<li>Instruct the patient to hold the arm as still as possible.</li>
	<li>Place the tubing hookup on the hub of the needle, and then remove the pressure from the proximal portion of the catheter.</li>
	<li>Secure the peripheral IV line to the skin. The most common way this is accomplished is via a clear dressing combined with tape.</li>
	<li>Adequately securing the line prevents it from becoming dislodged with patient movement. For patients who are diaphoretic or for pediatric patients, the line might need some additional tape or an arm board to keep it securely in place.</li>
</ol>
9. Saline flush
<ol>
	<li>Once the line is secured, attach the saline flush syringe to the end of the tubing.</li>
	<li>Draw blood back from the catheter by pulling backward on the plunger of the flush. Fill the entire tubing hookup with blood.</li>
	<li>Flush the saline into the catheter.</li>
	<li>Palpate the insertion site for swelling and ask the patient if any pain was experienced with the flush.</li>
</ol>
If the patient is experiencing no pain and one is able to draw blood back from the catheter, the catheter is in the correct location. Following placement, one can promptly begin to give the medications or fluids that the patient needs. If blood is not able to be drawn back, or if the line cannot be flushed (or is painful to the patient), there is a possibility that the catheter is not in the correct location within the lumen of the vein. The line should be further examined and assessed. If needed, remove the catheter and repeat the process at another insertion site.

Effectively placing an IV in a patient is imperative to treat many common medical problems. Common learner errors include not being prepared with all the supplies prior to starting the procedure and poor vein selection. Anecdotally, being able to "feel" the vein is more important than visualizing a vein. However, many learners will try and place an IV based on what they can see. In some groups of patients, peripheral IV placement might be challenging. These include current or prior intravenous drug users, patients with s...

peripheral venous cannulation

Source: Sharon Bord, MD, Department of Emergency Medicine, The Johns Hopkins University School of Medicine, Maryland, USA
Placement of an intravenous (IV) catheter is one of the key procedures in medicine. The IV catheter allows patients to receive critical medications, including pain medicine, insulin, antibiotics, blood products, and fluids for rehydration. Additionally, placing an IV catheter allows for blood samples to be obtained, which can be sent to the laboratory for testing and evaluation. A majority of peripheral IV lines are placed in the superficially located veins of the upper extremities. IV catheters can be placed in any superficial vein from the upper arm to the hand (though the veins in the antecubital fossa are larger than those in the hand). IV catheters can be placed in the lower extremities as well; however, this procedure should be performed with caution in patients with a history of diabetes or poor peripheral circulation.

Source: Sharon Bord, MD, Department of Emergency Medicine, The Johns Hopkins University School of Medicine, Maryland, USA
Placement of an intravenous (IV) ...

In the emergency department, there is a need to deliver: antibiotics for acute infections and sepsis, fluids for patients who are dehydrated, and medications to treat cardiac problems and arrhythmias. And peripheral intravenous access is one of the safest and easiest ways to give patients these treatments. A majority of IV lines are placed in the superficially located veins of the upper extremities extending from the upper arm to the hand. IV lines may also be placed in the lower extremities. However, caution is advised in patients with a history of diabetes and/or poor peripheral circulation. The video will begin by outlining the preparation needed for the IV placement procedure. It will then move onto the steps for catheter insertion and conclude by explaining how to effectively flush the IV line. First, obtain the necessary supplies for the procedure which include: non-sterile gloves, a rubber tourniquet, chlorhexidine or alcohol swabs, combined catheter and needle mechanism, IV set of tubing and bags, adhesive tape, 2x2 or 4x4 inch gauze, normal saline 5 milliliter syringe and 10 milliliter syringes for blood samples. Next, familiarize yourself with the combined catheter and needle mechanism. Catheters are packaged pre-threaded over needles and many have a safety mechanism in place, which will automatically retract the needle to prevent sharps exposure. When placing the IV, the catheter and needle are inserted together. The catheter is advanced and the needle is withdrawn.Catheter selection is based on the patient and the reason for IV therapy. Catheter size ranges from 14 gauge to 24 gauge. You may select a 14 to 16 gauge catheter if the patient requires large amounts of fluid or blood. Be sure to have a few different size catheters available, patient vein size is difficult to predict. Next, wash your hands thoroughly and put on a pair of non-sterile gloves. Then discuss the procedure with the patient. When the patient is comfortable, position them with the arm extended and straight. Then place a tourniquet on the upper portion of the arm and tie it tightly by crossing the ends over each other and tucking in one of the ends rather than making a knot. This method will ensure that the tourniquet can be easily removed after the vein has been accessed. Next, choose an insertion site, which may be the most challenging portion of the procedure. Start the palpation in the antecubital fossa, where vessels are largest, and then work your way down the arm. Feel for a vein by palpating for a "squishy" or "springy" area on the patients arm. Look for a vein by inspecting the patient's skin. Veins appear blue or gray. If no vessel is identified in the antecubital fossa, work your way more distally to look for a vessel. You may need to reapply the tourniquet on the forearm for placement of an IV in the hand. Since all patients have different anatomies and varying medical histories, the best vessel for catheter placement will be different. Once the vein is selected, use a chlorhexidine skin prep or alcohol swab to thoroughly clean a broad area around the vein. This is to reduce the rate of infection. Allow the skin to dry completely. Now let's review the catheter placement procedure. Using your non-dominant hand, pull the patient's skin taut from the inferior-distal portion of the insertion site. This is done in order to prevent the vein from "rolling" or moving during the procedure. Next, remove the cannula cover and insert the needle at a 45 degree angle to the skin with the bevel facing up. Insert it slowly to prevent penetrating the vessel. There will be some resistance when poking the needle through the patient's skin. After, the needle is inserted into the patient's skin, observe the hub of the needle for a "flash" of the patient's blood. Once the "flash" of patient blood is observed, advance the needle a few more millimeters into the patient's vein. Then slightly lower the needle-catheter mechanism and begin to advance the catheter portion. Reducing the angle of insertion is performed to prevent puncturing the posterior wall of the vessel. Next, advance the plastic catheter fully into the vessel while holding the needle still. Remove the tourniquet from the patient. Then place gauze underneath the hub of the catheter to prevent blood spilling from the vein. Apply gentle pressure on the proximal portion of the catheter in the patient's vessel and carefully remove the needle. Immediately place the needle in the sharps container. Next, place the tubing hookup on the hub of the needle and remove the pressure from the proximal portion of the catheter. Now attach the saline flush syringe to the end of the tubing. Next, draw blood back from the catheter by pulling on the plunger of the flush. Fill the entire tubing hookup with blood. If the patient is experiencing no pain and one is able to draw blood back from the catheter, the catheter is in the correct location. Then flush the saline into the catheter. Lastly, palpate the insertion site for swelling and ask the patient if they experienced any pain associated with the flush. Finally, secure the peripheral IV line to the patient's skin with clear dressing and tape. Adequately securing the line prevents it from becoming dislodged with patient movement. Additional tape or an arm board may be necessary for diaphoretic or pediatric patients. If the patient is experiencing pain and blood cannot be drawn back from the catheter, the catheter may not be in the correct location within the lumen of the vein. The line should be further examined and assessed. If deemed necessary, remove catheter and begin the process over again at a different insertion site. Effectively placing an IV in a patient is imperative to treat many common medical problems. Common learner errors include not being prepared with all the supplies prior to starting the procedure and poor vein selection. Anecdotally, being able to "feel" the vein, is more important than visualizing a vein. However, many learners will try and place an IV based on what they can "see". This is truly a procedure that is perfected with practice and patience. Take advantage of opportunities to place IVs in as many patients as possible to master the basics.You have just watched a JoVE video detailing the steps necessary to place an IV catheter into a patient, which is one of the key procedures in medicine. As always, thanks for watching!

Education

JoVE Science Education

Clinical Skills

Emergency Medicine and Critical Care

basic life support:  cardiopulmonary resuscitation and defibrillation

basic-life-support-cardiopulmonary-resuscitation-and-defibrillation

High-Quality CPR for Cardiac Arrest

High-quality CPR is a critical response for cardiac arrest. It helps support blood flow and can improve the chance of intact survival. This page focuses on the key steps that make CPR effective and the reasons each step matters. The video explains the essential parts of high-quality cardiopulmonary resuscitation, or CPR. It also describes the physiologic basis for each step. In other words, it connects the actions taken during resuscitation with the body’s need for oxygen and circulation. The...

basic life support part ii:  airway/breathing and continued cardiopulmonary resuscitation

basic-life-support-part-ii-airwaybreathing-continued-cardiopulmonary

Basic Life Support: Airway and Breathing

Basic life support for cardiac arrest includes airway and breathing support after CPR is already underway. The American Heart Association now uses the CAB sequence, which means circulation comes first, followed by airway and breathing. In this approach, rescuers start with high-quality chest compressions and defibrillation, if a defibrillator is available, before moving to respiratory support. Airway care and breathing support are considered only after the first CPR steps have been completed.

pericardiocentesis

Cardiac Tamponade Relief by Fluid Aspiration

Cardiac tamponade happens when fluid builds up in the pericardium, the thin sac around the heart, and compresses the heart chambers. The pericardium can stretch a little when fluid collects slowly. But a rapid buildup can overwhelm that ability and raise pressure inside the sac. As pressure rises, the right ventricle is compressed first and then the left ventricle cannot fill normally during diastole, the relaxation phase of the heartbeat. This lowers stroke volume and cardiac output. If the...

lateral canthotomy and inferior cantholysis

lateral-canthotomy-and-inferior-cantholysis

Relieving Eye Pressure After Facial Trauma

Lateral canthotomy is an emergency procedure used to relieve dangerous pressure behind the eye. It is performed when orbital compartment syndrome develops. In this condition, pressure rises fast and can damage the optic nerve and its blood supply, which can lead to blindness if the pressure is not relieved quickly. The eye sits in a tight space held by the medial and lateral canthal tendons. These tendons anchor the eyelids and limit how much room the globe, or eyeball, can move. When pressure...

percutaneous cricothyrotomy

Emergency Airway Access with Cricothyrotomy

Emergency cricothyrotomy provides airway access when endotracheal intubation has failed and ventilation is getting worse or is not possible. This is the feared "can’t intubate, can’t ventilate" situation. In that setting, cricothyrotomy is the surgical airway procedure of choice. Cricothyrotomy is often chosen over tracheotomy because it has a lower risk of complications. It also uses the cricothyroid membrane, whose anatomy is more predictable. The procedure can be performed more quickly,...

open cricothyrotomy

Emergency Airway Access by Cricothyrotomy

Emergency airway access by cricothyrotomy is a surgical way to create a breathing route when standard intubation fails. It uses an incision through the cricothyroid membrane to place a tube into the airway. This option is used in the feared "can't intubate, can't ventilate" situation, when endotracheal intubation has not worked and breathing is getting worse or has stopped. The airway is usually secured with a tracheostomy tube. This tube has three parts: an outer cannula, an inner cannula,...

needle thoracostomy

Emergency Relief for Tension Pneumothorax

Tension pneumothorax is a life-threatening emergency that can build pressure around the lung. It can happen after chest trauma or from a spontaneous air leak from the lung. As air collects in the pleural space, the lung separates from the chest wall and normal breathing is disrupted. When the trapped air keeps expanding, the lung can shrink and collapse. The pressure can also push the mediastinum, which includes the heart and great vessels, away from the center of the chest. This makes it...

tube thoracostomy

Chest Tube Drainage for Lung Compression

Chest tube drainage is a procedure that places a hollow tube into the thoracic cavity to remove air or fluid. It is also called chest tube placement or tube thoracostomy. The goal is to relieve pressure on the lungs so they can re-expand. Emergency chest tube insertion is used as a definitive treatment for tension pneumothorax, traumatic hemothorax, large pleural effusions, and empyemas. In pneumothorax, air collects in the pleural cavity and separates the pleural layers, which prevents the...

intra-articular shoulder injection for reduction following shoulder dislocation

intra-articular-shoulder-injection-for-reduction-following-shoulder

Ultrasound-Guided Lidocaine for Shoulder Reduction

Anterior shoulder dislocation is a common joint injury seen in emergency settings. It happens when the humeral head slips out of the glenohumeral joint in front of the scapular glenoid. The shoulder can lose its normal connection with the arm after this injury. This dislocation can happen after a fall onto an arm that is abducted, extended, and externally rotated. Bicycle and running accidents are common examples. It may also follow minor trauma. In some cases, it can even occur when a person...

arterial line placement

Monitoring Blood Pressure with an Arterial Line

Arterial line placement is used for direct blood pressure monitoring when more exact and reliable readings are needed. A catheter is inserted into a major artery, such as the radial artery or femoral artery, so it can transduce blood pressure and provide intra-arterial measurements. Most patients can have blood pressure checked accurately with non-invasive methods. However, some situations require closer monitoring because the reading must be more specific and dependable. This is especially...

intraosseous needle placement

Fast Bone Access for Emergency Care

Intraosseous needle placement gives emergency teams fast access to the blood stream when a peripheral intravenous cannula, or PIV, is hard to place. It is used for unstable patients who need urgent medications, fluids, or blood products. The needle enters the highly vascularized intramedullary space inside a long bone, where substances can be absorbed quickly. PIV placement often fails for practical reasons. It can be difficult in small children, injection drug users, obese people, and...

IV Catheter Placement in Superficial Veins

IV catheter placement is a key medical procedure for giving treatment through a vein. An intravenous, or IV, catheter helps patients receive pain medicine, insulin, antibiotics, blood products, and fluids for rehydration. It also allows blood samples to be collected and sent to the laboratory for testing and evaluation. Most peripheral IV lines are placed in superficial veins in the upper extremities. A peripheral IV line is a catheter placed in a vein near the skin surface. It can be inserted...

central venous catheter insertion: internal jugular

central-venous-catheter-insertion-internal-jugular

Ultrasound-Guided IJ Catheter Placement

Ultrasound-guided internal jugular catheter placement is a common way to place central venous access. This approach is used when a patient needs reliable vascular access, vasopressor or caustic medication delivery, central venous pressure monitoring, intravascular devices such as pacing wires or Swann-Ganz catheters, volume resuscitation, total parenteral nutrition, hemodialysis, or frequent phlebotomy. Safe placement depends on knowing the neck anatomy and understanding how the internal...

central venous catheter insertion: femoral vein

central-venous-catheter-insertion-femoral-vein

Femoral Venous Access for Emergencies

Femoral venous access is a fast option for central venous catheter placement in emergencies. It is often used when urgent central access is needed during medical codes and trauma resuscitations. The femoral vein can be reached with ultrasound guidance or with surface landmarks, which makes it practical when time matters. Central venous access is used in many clinical situations. It can support vascular access, vasopressor and caustic medication delivery, central venous pressure monitoring,...

central venous catheter insertion: subclavian vein

central-venous-catheter-insertion-subclavian-vein

Subclavian Central Line Placement Steps

Subclavian central venous catheter placement is used to gain central venous access through the subclavian vein. Central venous access is needed in many clinical situations for hemodynamic monitoring, medication delivery, and blood sampling. The subclavian route is one of three main sites used for central venous cannulation, along with the internal jugular and femoral veins. The subclavian approach has several advantages. It is associated with lower infection and thrombosis rates than internal...

emergency medicine and critical care

This collection delves into a wide range of procedures employed in emergency and intensive care settings, ranging from basic life support methods such as CPR and rescue breathing to other common procedures performed during emergency situations.

Learn how IV catheters are placed in superficial veins, why they are used, and when lower-extremity placement needs extra caution.

IV Catheter Placement in Superficial Veins | JoVE K12

Sharon Bord

Overview

Preparation

Catheter Insertion

Summary

Characteristics of Life

Biology is a natural science that studies life and living organisms, including their structure, function, development, interactions, evolution, ...

https://cloudfront.jove.com/files/media/science-education/science-education-thumbs/10647.jpg

Cell Structure

Background
Cells represent the most basic biological units of all organisms, whether it be simple, single-celled organisms like bacteria, or large, ...

Visualizing Onion and Cheek Cells
ExpandImmediately before the experiment, wash and peel onion bulbs for the class.
Remove the entire brown outer skin and ...

Visualizing Onion and Human Cells
ExpandIn this experiment you will prepare different types of cells from a plant and animal, onion and human ...

What are Cells?

Cell Diversity

The concept of a cell started with microscopic observations of dead cork tissue by Robert Hooke in 1665. Hooke coined the term &#34;cell&#34; based on the ...

Cytoplasm

The cytoplasm consists of organelles and a framework of protein scaffolds called the cytoskeleton suspended in an aqueous solution, the cytosol. The ...

The Nucleus

The nucleus is a membrane-bound organelle that acts as a control center in a eukaryotic cell. It contains chromosomal DNA, which controls gene expression ...

The Central Dogma

The DNA Helix

Nucleic Acids

DNA as a Genetic Template

Structure of a Gene

A gene is the fundamental unit of heredity. Every individual has two copies of each gene, one inherited from each parent. Although most people contain the ...

Chromosome Structure

Base-pairing and DNA Repair

What is Gene Expression?

A gene is a stretch of DNA that serves as the blueprint for functional RNAs and proteins. Since DNA is comprised&#160; of nucleotides and proteins are ...

RNA Structure

The basic structure of RNA consists of a string of ribonucleotides attached by phosphodiester bonds. Although most RNA is single-stranded, it can form ...

Types of RNA

Three main types of RNA are involved in protein synthesis: messenger RNA (mRNA), transfer RNA (tRNA), and ribosomal RNA (rRNA). These RNAs perform diverse ...

Transcription

Transcription is the synthesis of RNA from a DNA sequence by RNA polymerase. It is the first step in producing a protein from a gene sequence. ...

Translation

Translation is the process of synthesizing proteins from the genetic information carried by messenger RNA (mRNA). Following transcription, it constitutes ...

Ribosomes

Ribosomes translate genetic information encoded by messenger RNA (mRNA) into proteins. Both prokaryotic and eukaryotic cells have ribosomes. Cells that ...

Protein and Protein Structures

Proteins: From Genes to Degradation

From DNA to Protein

The flow of genetic information in cells from DNA to mRNA to protein is described by the central dogma, which states that genes specify the sequence of ...

Protein Folding

Proteins are chains of amino acids linked together by peptide bonds. Upon synthesis, a protein folds into a three-dimensional conformation, critical to ...

An Overview of Gene Expression

Gene expression is the complex process where a cell uses its genetic information to make functional products. This process is regulated at multiple ...

an-introduction-to-caenorhabditis-elegans

An Introduction to Caenorhabditis elegans

Caenorhabditis elegans is a microscopic, soil-dwelling roundworm that has been powerfully used as a model organism since the early 1970&rsquo;s.  It was ...

An Overview of Genetic Analysis

An organism&#8217;s physical traits, or phenotype, are a product of its genotype, which is the combination of alleles (gene variants) inherited from its ...

An Introduction to Cell Death

Necrosis, apoptosis, and autophagic cell death are all manners in which cells can die, and these mechanisms can be induced by different stimuli, such as ...

An Overview of Genetic Engineering

Genetic engineering &#8211; the process of purposefully altering an organism&#8217;s DNA &#8211; has been used to create powerful research tools and model ...

An Introduction to Cell Division

Cell division is the process by which a parent cell divides and gives rise to two or more daughter cells. It is a means of reproduction for single-cell ...

An Overview of Genetics and Disease

Many human diseases are associated with mutations or variations in genetic sequences. Some of these genetic variants are heritable, passed down from ...

an-introduction-to-cellular-and-molecular-neuroscience

An Introduction to Cellular and Molecular Neuroscience

Cellular and molecular neuroscience is one of the newest and fastest growing subdisciplines in neuroscience. By investigating the influences of genes, ...

Annexin V and Propidium Iodide Labeling

Staining with annexin V and propidium iodide (PI) provides researchers with a way to identify different types of cell death&#8212;either necrosis or ...

an-introduction-to-developmental-genetics

An Introduction to Developmental Genetics

Development is the complex process through which a single-celled embryo transforms into a multicellular organism. Developmental processes are guided by ...

Bacterial Transformation: Electroporation

The term &#x201C;transformation&#x201D; refers cellular ingestion of foreign DNA.  In nature, transformation can occur in certain types of bacteria.  In ...

an-introduction-to-molecular-developmental-biology

An Introduction to Molecular Developmental Biology

Molecular signals play a major role in the complex processes occurring during embryonic development. These signals regulate activities such as cell ...

bacterial-transformation-the-heat-shock-method

Bacterial Transformation: The Heat Shock Method

Transformation is the process that occurs when a cell ingests foreign DNA from its surroundings. Transformation can occur in nature in certain types of ...

an-introduction-to-saccharomyces-cerevisiae

An Introduction to Saccharomyces cerevisiae

Saccharomyces cerevisiae (commonly known as baker&rsquo;s yeast) is a single-celled eukaryote that is frequently used in scientific research.  S. ...

Cell Cycle Analysis

Cell cycle refers to the set of events through which a cell grows, replicates its genome, and ultimately divides into two daughter cells through the ...

An Introduction to Transfection

Transfection is the process of inserting genetic material, such as DNA and double stranded RNA, into mammalian cells. The insertion of DNA into a cell ...

Chromatin Immunoprecipitation

Histones are proteins that help organize DNA in eukaryotic nuclei by serving as &#8220;scaffolds&#8221; around which DNA can be wrapped, forming a complex ...

An Overview of Epigenetics

Since the early days of genetics research, scientists have noted certain heritable phenotypic differences that are not due to differences in the ...

community-dna-extraction-from-bacterial-colonies

Community DNA Extraction from Bacterial Colonies

Source: Laboratories of Dr. Ian Pepper and Dr. Charles Gerba - The University of Arizona
Demonstrating Author: Luisa Ikner
Traditional methods of analysis ...

Cytogenetics

Cytogenetics is the field of study devoted to chromosomes, and involves the direct observation of a cell&#8217;s chromosomal number and structure, ...

embryonic-stem-cell-culture-and-differentiation

Embryonic Stem Cell Culture and Differentiation

Culturing embryonic stem (ES) cells requires conditions that maintain these cells in an undifferentiated state to preserve their capacity for self-renewal ...

DNA Gel Electrophoresis

DNA gel electrophoresis is a technique used for the detection and separation of DNA molecules. An electric field is applied to a gel matrix comprised of ...

Enzyme Assays and Kinetics

Enzyme kinetics describes the catalytic effects of enzymes, which are biomolecules that facilitate chemical reactions necessary for living organisms. ...

DNA Ligation Reactions

In molecular biology, ligation refers to the joining of two DNA fragments through the formation of a phosphodiester bond.  An enzyme known as a ligase ...

explant-culture-for-developmental-studies

Explant Culture for Developmental Studies

Explant culture is a technique in which living cells or tissues are removed from an embryo for continued development outside of the organism. This ex vivo ...

DNA Methylation Analysis

Methylation at CpG dinucleotides is a chemical modification of DNA hypothesized to play important roles in regulating gene expression. In particular, the ...

Expression Profiling with Microarrays

Microarrays are important tools for profiling gene expression, and are based on complementary binding between probes that are attached to glass chips and ...

Density Gradient Ultracentrifugation

Density gradient ultracentrifugation is a common technique used to isolate and purify biomolecules and cell structures. This technique exploits the fact ...

F&#246;rster Resonance Energy Transfer (FRET)

F&#246;rster resonance energy transfer (FRET) is a phenomenon used to investigate close-range biochemical interactions. In FRET, a donor photoluminescent ...

detecting-environmental-microorganisms-with-polymerase-chain-reaction

Detecting Environmental Microorganisms with the Polymerase Chain Reaction and Gel Electrophoresis

Source: Laboratories of Dr. Ian Pepper and Dr. Charles Gerba - Arizona University
Demonstrating Author: Bradley Schmitz
Polymerase chain reaction (PCR) is ...

Gel Purification

Gel purification is used to recover DNA fragments after electrophoretic separation. DNA recovery from an agarose gel includes three basic steps: binding, ...

Detecting Reactive Oxygen Species

Reactive oxygen species are chemically active, oxygen-derived molecules capable of oxidizing other molecules. Because of their reactive nature, there are ...

Gene Silencing with Morpholinos

Morpholino-mediated gene silencing is a common technique used to study roles of specific genes during development. Morpholinos inhibit gene expression by ...

development-and-reproduction-of-the-laboratory-mouse

Development and Reproduction of the Laboratory Mouse

Successful breeding of the laboratory mouse (Mus musculus) is critical to the establishment and maintenance of a productive animal colony. Additionally, ...

Genetic Crosses

To dissect genetic processes or create organisms with novel suites of traits, scientists can perform genetic crosses, or the purposeful mating of two ...

drosophila-melanogaster-embryo-and-larva-harvesting-and-preparation

Drosophila melanogaster Embryo and Larva Harvesting and Preparation

Drosophila melanogaster embryos and larvae are easy to manipulate and develop rapidly by mechanisms that are analogous to other organisms, including ...

Construct an explanation based on evidence for how the structure of DNA determines the structure of proteins which carry out the essential functions of life through systems of specialized cells.

HS-LS1-1.

Peripheral Venous Cannulation

Description

Transcript

Tags

More videos by Standards