Reverse Yeast Two-hybrid System to Identify Mammalian Nuclear Receptor Residues that Interact with Ligands and/or Antagonists

Summary

Ketoconazole binds to and antagonizes Pregnane X Receptor (PXR) activation. Yeast high throughput screens of PXR mutants define a unique region for ketoconazole binding. This yeast-based genetic method discovers novel nuclear receptor interactions with ligands that associate with surface binding sites.

Abstract

As a critical regulator of drug metabolism and inflammation, Pregnane X Receptor (PXR), plays an important role in disease pathophysiology linking metabolism and inflammation (e.g. hepatic steatosis)^1,2. There has been much progress in the identification of agonist ligands for PXR, however, there are limited descriptions of drug-like antagonists and their binding sites on PXR^3,4,5. A critical barrier has been the inability to efficiently purify full-length protein for structural studies with antagonists despite the fact that PXR was cloned and characterized in 1998. Our laboratory developed a novel high throughput yeast based two-hybrid assay to define an antagonist, ketoconazole's, binding residues on PXR⁶. Our method involves creating mutational libraries that would rescue the effect of single mutations on the AF-2 surface of PXR expected to interact with ketoconazole. Rescue or "gain-of-function" second mutations can be made such that conclusions regarding the genetic interaction of ketoconazole and the surface residue(s) on PXR are feasible. Thus, we developed a high throughput two-hybrid yeast screen of PXR mutants interacting with its coactivator, SRC-1. Using this approach, in which the yeast was modified to accommodate the study of the antifungal drug, ketoconazole, we could demonstrate specific mutations on PXR enriched in clones unable to bind to ketoconazole. By reverse logic, we conclude that the original residues are direct interaction residues with ketoconazole. This assay represents a novel, tractable genetic assay to screen for antagonist binding sites on nuclear receptor surfaces. This assay could be applied to any drug regardless of its cytotoxic potential to yeast as well as to cellular protein(s) that cannot be studied using standard structural biology or proteomic based methods. Potential pitfalls include interpretation of data (complementary methods useful), reliance on single Y2H method, expertise in handling yeast or performing yeast two-hybrid assays, and assay optimization.

Introduction

The yeast two-hybrid (Y2H) assay is widely used to discover protein-protein interactions and more recently for discovery of novel small molecules that disrupt protein-protein interaction complexes ^{7, 8, 9, 10, 11}. However, the conventional approaches of this assay, used for drug discovery or "hits", do not allow for detection of allosteric interaction residues of chemicals compounds within protein-protein surfaces, that when altered still interact and allow for interrogation of the altered residues¹¹. Indeed, such a method(s), if feasible to develop, would enable a tractable yeast system for high throughput assessment of allosteric interaction residues critical for protein-protein interaction disruption. In the context of drug discovery, the most direct way to establish interaction of compounds with proteins would involve structural determination (e.g. crystalization of protein-inhibitor complex). These methods are cumbersome, use elaborate resources and it is not technically feasible to perform structural studies on every protein.

Tractable genetic drug screening systems have been established in bacteria^{1, 2} and other model systems like mammalian two-hybrid. However, these systems need optimization and alternative systems like Y2H are still the most tested in drug discovery. There are limitations that include poor sensitivity and reliability of interactions using singular methods¹³ , however, a single Y2H assay can be modified to answer specific questions regarding interaction residues. In the field of nuclear receptor research, Y2H has been used to define interacting proteins¹⁴, however, these protein interactions have rarely been used to define the nature in which ligands/antagonists interact with nuclear receptor-protein complexes. Thus, our laboratory focused efforts on defining a method, especially for receptor proteins that are not readily amenable to proteomic based methods, that would unearth novel ligand/antagonist interacting residues using a reverse Y2H based discovery platform.

Based on our previous finding that ketoconazole disrupts PXR and its activator SRC-1, we developed a novel reverse Y2H system that enable us to define and interrogate ketoconazole interacting residues on PXR⁶. Our method is based on the properties of the yeast GAL4 protein that consists of separable domains responsible for DNA-binding and transcriptional activation. The PXR LBD protein is expressed as a fusion to the LexA DNA-binding domain (DNA-BD), while the full length co-activators SRC-1 (steroid receptor coactivator 1) proteins are expressed as fusions to the GAL4 activation domain (AD). Interaction between PXR and SRC-1 fusion proteins leads to the transcriptional activation of GAL4-binding sites containing reporter gene β-LacZ that is integrated into the yeast genome. Ketoconazole, a PXR antagonist, disrupts PXR and SRC-1 interaction ^{15, 16, 17} and we can detect the interaction of PXR and SRC-1 in the presence or absence of ketoconazole after staining colonies on filters for X-gal activity. The principle of Y2H is illustrated in Figure 1 and the experimental procedure is summarized in Figure 2.

Protocol

1. Construction of PXR and SRC-1 Fusions in Yeast Vectors

1. PCR amplification of Human PXR LBD (107-434 amino acids) and Human SRC-1 full length (1-1401 amino acids).
   1. Use pSG5-hPXR plasmid⁸ as PXR LBD template, use pCMX-SRC1 plasmid as SRC-1 templates.
   2. Thaw PCR SuperMix, DNA templates and primers (see Materials), keep them on ice.
   3. Add 0.25 μg/μl DNA template 1 μl, 10 mM primer pairs 2 μl each, PCR SuperMix 45 μl and add H₂O to bring total volume to 50 μl.
   4. Set PCR at one cycle of 94 °C for 2 min, 20 cycles of 94 °C for 30 sec, 55 °C for 30 sec and 72 °C for 2 min, then one cycle of 72 °C for 10 min for extension. Check PCR products by running on 1% agarose gel.
2. PCR products cloning into Y2H vectors.
   1. Purify PCR products from 1% agarose gel. Digest PXR, LBD, PCR, and Y2H vector pSH2-1 with BamHI and SalI; digest SRC-1 PCR and Y2H vector pGADNOT with NotΙ and SalΙ. To do this, add 1 μg DNA , 3 μl 10x reaction buffer, 1 μl restriction enzymes, and finally H₂O to bring total volume to 30 μl.
   2. Put digestion samples in 37 °C water bath for 1 hr. Check digestion by running on 1% agarose gel.
   3. Purify digestion samples from 1% agarose gel, ligate digested PCR products and Y2H vectors and transform to DH5α competent cells.
   4. Pick the colonies and isolate the plasmid DNA.
3. Identify pSH2-1-PXR plasmid DNA by BamHI/SalI digestion, identify pGADNOT-SRC-1 plasmid DNA by NotI/SalI digestion. Verify all positive plasmid DNA by sequencing.

2. Yeast Two-hybrid Assays

1. Inoculate the yeast strain into 5 ml YPAD and incubate over night by constant agitation (220 rpm at 30 °C). Note: The Saccharomyces cerevisiae strain was CTY10-5d (MATa ade2 trp1-901 leu2-3,112 his3-200 ga l4^-gal80^- URA3::lexA-lacZ) that contains an integrated GAL1-lacZ gene with lexA operator¹⁰. To obtain viable yeast cells resistant to ketoconazole, but those that did not carry transporter alterations as a cause of azole resistance^18-20, novel strains of CTY10-5d yeast were obtained by first deleting ERG3 ( erg3Δ)and then introducing additional deletion in ERG11 ( erg3Δ/erg11Δ) genes by homologous recombination. The construction details have been described in a previously published manuscript⁶ .
2. The next day (in the morning), inoculate yeast (1:20) in 5 ml YAPD and incubate to obtain an OD₆₀₀ ~0.2 by constant agitation (220 rpm at 30 °C).
3. Pellet the cells at 2,000 rpm in a microcentrifuge for 2 min and discard the supernatant. Then wash the pellet twice with autoclaved water and once with 0.1 M LiAc.
4. After the final wash, discard supernatant and add the following reagents to the cell pellet: 240 μl PEG 3500 50% w/v, 36 μl 1 M LiAc, 50 μl 2 mg/ml boiled salmon sperm ssDNA, H₂O 34 μl. Vortex to mix, add 1 μg pSH-PXR and 1 μg pGADNOT-SRC-1 DNA and mix.
5. Transfer the mix to polystyrene round-bottom tube, agitate the transformation, mix (220 rpm at 30 °C) for 30 min. Move the tube to 42 °C water bath and incubate for an additional 30 min.
6. Centrifuge the tube at 2,000 rpm for 2 min and remove the supernatant. Wash pellet once with autoclaved water.
7. Pipette 100 μl sterile water into the tube, re-suspend the cells by gentle finger tapping and pipetting, then plate onto plates of -His/-Leu Dropout Medium (Formulation per One Liter -His/-Leu Dropout Medium: 20 g dextrose, 1.7 g YNB, 0.67 g CSM-His/-Leu, 5 g ammonium sulfate, 1.5% agar) and incubate at 30 °C for 3-4 days to isolate transformants.

3. X-gal Filter Assay

1. Cut nitrocellulose membrane to the size of part of a Petri dish. Label the nitrocellulose membrane to mark the orientation.
2. Place premarked nitrocellulose membrane on yeast colonies, make sure that the membrane is in contact with the surface of the plate medium.
3. Remove the membrane, place it colony side up on a 3 mm filter paper, and place the membrane and the filter paper at -80 °C for 15 min.
4. Make X-gal solution. Add 50 μl 20 mg/ml X-gal and 15 μl β-mercaptoethanol to 5 ml of Z-buffer (1 L buffer contains 16.1 g Na₂HPO₄7H₂O, 5.5 g NaH₂PO₄ H₂O, 0.75 g KCl , 0.25 g MgSO₄•7H₂O) . If Z Buffer was kept at 4 °C, bring it to room temperature before adding these reagents.
5. Place two circles of 3 mm filter paper in a Petri dish and soak them with 5 ml X-gal solution. Drain excess buffer from the Petri dish and place the nitrocellulose membrane with the colony side up.
6. Close the lid, ensure that the membrane is making complete contact with the filter paper and it is completely wet. Wrap the Petri dish in foil and incubate at 37 °C for 30 min to overnight.

4. Liquid β-gal Assay

1. Grow Yeast in -His/-Leu Dropout liquid medium to OD₆₀₀ 0.7.
2. Transfer 1 ml medium into a 1.5 ml microcentrifuge tube and centrifuge at 3,000 rpm for 2 min. Discard the supernatant.
3. Add 1 ml of Z Buffer to resuspend the pellet, centrifuge at 3,000 rpm again for 2 min. Discard the supernatant.
4. Add 150 μl of Z Buffer with 2ME to resuspend the cell pellet, mix then add 50 μl chloroform and 20 μl 0.1% SDS. Vigorously vortex the sample for 15 sec.
5. Add 700 μl of ONPG Solution (1 mg/ml in Z buffer). Set the timer, incubate at 30 °C long enough to allow the yellow colour to develop and note total reaction time.
6. Add 500 μl of 1 M Na₂CO₃ to stop the reaction and determine the absorbance at 420 nm. The blank is 700 μl ONPG solution plus 500 μl 1 M Na₂CO₃.

Calculate Miller Units as follows: Miller Units = (Å420*1,000)/(Å600*min*ml)

Å420: absorbance units at 420 nanometers; Å600: absorbance units at 600 nanometers; min: the reaction time in minutes; ml: the reaction volume in ml

Results

We performed an assay to see if we could detect a colorimetric readout of the association of PXR and steroid receptor coactivator-1 (SRC-1). Since yeast has significant sterol production, it has previously been shown that lacZ expression in yeast can be induced without the need for additional exogenous ligand. We found that lacZ expression (blue colonies) is also induced in the yeast strain transformed with PXR and SRC-1; however, there is no induction of LacZ expression (white colonies) in yeast transformed with empty v...

Discussion

In our modified Y2H assay, we have identified important residues for ketoconazole interactions on PXR⁶. Since SRC-1 is a coactivator (and was cloned into the pGADNot vector), we also tested whether SRC-1 could activate lacZ expression when cloned into the pSH vector system and whether this would change the activation profile and/or affect the leakiness of the yeast two-hybrid assay. Using our redesigned plasmids we performed two-hybrid assays in erg3Δ/erg11Δ yeast. As before, we sho...

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
Yeast Strain CTY10-5d erg3Δ/erg11Δ	Our lab		CTY10-5d yeast was double knocked out ERG3 and ERG11 (erg3Δ/erg11Δ) genes6 .
YPD Growth Medium	BD Biosciences	630409
Difco Yeast Nitrogen Base (YNB) w/o Amino Acids and Ammonium Sulfate	BD Biosciences	233520
Bacto Agar	BD Biosciences	214010
CSM-His/-Leu Complete Supplement Mixture	MP Biomedicals	4250-412
ONPG (o-Nitrophenyl Β-D- Galactopyranoside).	Sigma-Aldrich	N1127
2-Mercaptoethanol	Sigma-Aldrich	M6250
Luria Broth (LB)	Sigma-Aldrich	L3022
X-Gal	Fisher	BP-1615
Sonicated Salmon Sperm DNA boiled (10 mg/ml)	Life Technology	156-017
Ampicillin	Acros Organics	61177
Ketoconazole	Sigma-Aldrich	K1003
N,N-Dimethylformamide	Acros Organics	326871000
Lithium Acetate	Sigma-Aldrich	L4158
50% PEG-3350 solution, filter-sterilized	Sigma-Aldrich	P-3640
Nitrocellulose Membrane	Whatman	10402091
10 cm Petri Dish	Fisher	875712
5'-ACCGGATCCCGATGAAGA AGGAGATGATCATGTCC-3'	our lab		PXR LBD forward primer for pSH2-1
5'-AGAGTCGACTCAGCTA CCTGTGATGCC -3'	our lab		PXR LBD reverse primer for pSH2-1
5'-TATAGC GGCCGCATGAGTG GCCTCGGGGACAGTTCATCC -3'	our lab		SRC-1 forward primer for pGADNOT
5'-GCGGTCGACTTATTCAGTCA GTAGCTG -3'	our lab		SRC-1 reverse primer for pGADNOT
Platinum PCR Supermix	Invitrogen	11306-016
BamHI	our lab	R0136
SalI	our lab	R0138
NotI	our lab	R0189