In Vitro Transcription Assays and Their Application in Drug Discovery

Summary

In this manuscript, we describe a protocol to functionally examine transcription and the inhibitory activity of antibacterial agents targeting bacterial transcription.

Abstract

In vitro transcription assays have been developed and widely used for many years to study the molecular mechanisms involved in transcription. This process requires multi-subunit DNA-dependent RNA polymerase (RNAP) and a series of transcription factors that act to modulate the activity of RNAP during gene expression. Sequencing gel electrophoresis of radiolabeled transcripts is used to provide detailed mechanistic information on how transcription proceeds and what parameters can affect it. In this paper we describe the protocol to study how the essential elongation factor NusA regulates transcriptional pausing, as well as a method to identify an antibacterial agent targeting transcription initiation through inhibition of RNAP holoenzyme formation. These methods can be used a as platform for the development of additional approaches to explore the mechanism of action of the transcription factors which still remain unclear, as well as new antibacterial agents targeting transcription which is an underutilized drug target in antibiotic research and development.

Introduction

Transcription is the process in which RNA is synthesized from a specific DNA template. In eukaryotic cells there are three distinct RNAPs: RNAP I transcribes rRNA precursors, RNAP II is responsible for the synthesis of mRNA and certain small nuclear RNAs, and the synthesis of 5S rRNA and tRNA is performed by RNAP III. In bacteria, there is only one RNAP responsible for the transcription of all classes of RNA. There are three stages of transcription: initiation, elongation and termination. Transcription is one of the most highly regulated processes in the cell. Each stage in the transcription cycle represents a checkpoint for the regulation of gene expression¹. For initiation, RNAP has to associate with a sigma factor to form holoenzyme, which is required to direct the enzyme to specific sites called promoters² to form an open promoter complex. Subsequently, a large suite of transcription factors are responsible for the regulation of RNAP activities during the elongation and termination phases. The transcription factor examined here is the highly conserved and essential protein, NusA. It is involved in regulating transcription pausing and termination, as well as anti-termination during rRNA synthesis^3-5.

In vitro transcription assays have been developed as powerful tools to study the complex regulatory steps during transcription⁶. In general, a linear fragment of DNA including a promoter region is required as the template for transcription. The DNA template is usually generated by PCR or by linearizing a plasmid. Purified proteins and NTPs (including one radiolabeled NTP for detection purposes) are then added and product analyzed following the required period of incubation. Using appropriate templates and reaction conditions, all stages of transcription have been examined using this approach which has enabled detailed molecular characterization of transcription over the last half century⁷. In combination with information on the 3-dimensional structure of RNAP it has also been possible to probe the molecular mechanism of transcription inhibition by antibiotics and antibiotic leads, and use this information in the development of new, improved drugs^8-10.

In this work we provide examples of how transcription assays can be used to determine the mechanism of regulation by transcription elongation/termination factor NusA, and how the mechanism of action of a novel transcription initiation inhibitor lead can be determined.

Protocol

Caution: Experiments involve the use of the radioactive isotope ³²P and no work should be undertaken until all appropriate safety conditions have been met. Generally personnel are required to attend a safety course and undergo supervised practice prior to experiments using radioactive reagents. Please wear personal protection equipment (thermoluminescent dosimeter, safety glasses, gloves, radiation room lab coats, full length pants, closed-toe shoes) when performing the reaction.

1. Preparation of Assay Materials

1. Obtain the Proteins Required for Transcription assay.
   1. For the experiment described here, overproduce and purify E. coli RNAP in the laboratory as described¹¹, or obtain from a commercial source (Materials List).
      Note: Both provide similar results. Other methods for purification of native or affinity labeled RNAP can also be used^12,13. Sigma/NusA factors can be obtained as described in previous work^14,15.
2. Preparation of Diethyl Pyrocarbonate (DEPC) Treated Water
   Note: Alternatively, RNase-free water can be obtained from commercial sources (Materials List).
   1. Add 1 ml diethyl pyrocarbonate (DEPC) to 1 L of purified water (0.1% v/v) and mix overnight.
   2. Autoclave DEPC water and tips twice.
3. DNA Template Preparation
   1. Purify plasmid pSG1154¹⁶ and/or pIA226¹⁷ using a plasmid purification kit (Materials List) according to manufacturer's instructions.
   2. To amplify the template for run-off transcription assays (a 360 bp fragment encompassing the P_xyl promoter region), assemble a PCR reaction on ice including 25 μl 2x PCR mix (Materials List), 2 μl each of the primers (5 µM): 5′-CAAAGCCTGTCGGAATTGG-3′ (forward) and 5′-CCCATTAACATCACCATC-3′ (reverse), 1 μl pSG1154 plasmid preparation (250 µM) and 20 μl purified water).
      1. Or alternatively, for single round transcription assays, amplify a 447 bp fragment encompassing the λ P_R promoter region from pIA226¹⁷. Set up a PCR reaction on ice using 25 μl 2x PCR mix, 2 μl each of the primers (5 µM): 5′-GTGCTCATACGTTAAATCT-3′ (forward) and 5′-CAGTTCCCTACTCTCGCATG-3′ (reverse), 1 μl pIA226¹⁷ plasmid preparation (250 µM) and 20 μl purified water).
         Note: This template lacks cytosine until the +26 nt position, which is the 26^th nucleotide from the transcription start site. Therefore, transcription using this template will allow initiation, promoter clearance and stalling at the +26 nt to form a stable transcription elongation complex (EC) when only ATP, UTP and GTP are present in the reaction.
   3. Set up a PCR reaction with the following conditions: 95 °C for 30 sec, 50 °C for 30 sec, 72 °C for 30 sec, repeating for 30 cycles.
   4. Purify the product using a PCR clean-up kit (Materials List) according to manufacturer's instructions and elute in 100 μl transcription buffer for the transcription assay.
   5. Determine the template DNA concentration using a fluorospectrometer (Materials List).
4. NTP Preparation
   Note: NTPs can be obtained from different commercial sources (Materials List).
   1. Dissolve NTPs (≥99% pure) in DEPC-treated water to make 1 M stock, aliquot 1 ml of the solution into 1.5 ml tubes (50 μl in each tube) and store at -20 °C.
   2. Order α-³²P UTP (3,000 Ci/mmol) prior to the experiment. ³²P has a short half-life of 14.29 days.
      Note: Using alpha-labeled UTP avoids comparing the intensity of bands with different length.
5. RNA Ladder Preparation
   1. Assemble the following reaction at room temperature: 0.5 μg RNA Template Mix (Materials List), 80 mM HEPES buffer pH7.5, 12 mM MgCl₂, 10 mM NaCl, 10 mM DTT, 2 mM ATP/CTP/GTP, 0.5 mM UTP, 2 μl α-³²P UTP, 0.5 μl T7 RNAP (Materials List), DEPC-treated water to 20 μl.
   2. Allow reaction to proceed at 37 °C for 1 hr. Use immediately or store at -80 °C.

2. Preparation of RNA Sequencing Gel

1. Gel Preparation
   1. Clean the plates from a sequencing gel apparatus (Materials List) twice with 70% ethanol and purified water, and assemble the cell with a comb and two spacers.
      Note: One plate can be coated with siliconizing reagent (Materials List) to facilitate gel removal in Step 4.2.
   2. Dissolve 33.6 g urea in 22 ml water and 16.4 ml of 5x Tris/Borate/EDTA (TBE) buffer (54 g tris(hydroxymethyl)aminomethane; 27.5 g boric acid; 10 ml of 1 M ethylenediaminetetraacetic acid (EDTA), pH 7.4 in 1 L water) using a magnetic stirrer.
   3. Add 16 ml of 40% Acrylamide/bis-acrylamide solution (19:1) to the urea solution and filter through a 0.45 µm filter.
   4. Add 514 µl 10% (w/v) freshly prepared ammonium persulfate in water followed by 51.4 µl N,N,N′,N′-Tetramethylethylenediamine (TEMED) to the filtered solution.
   5. Gently invert the gel solution to avoid excessive aeration and inject immediately and smoothly into the horizontally positioned pre-packed sequencing cell from the bottom injection hole. Take care to avoid making bubbles during injection.
   6. Allow 1-1.5 hr until the gel is completely set before use in a transcription assay. The gel can be stored at room temperature for two or three days when wrapped with water-wet tissue on the top of the sequencing cell.

3. Transcription Reaction

1. Transcription Elongation Pausing Assay
   1. Formation of a transcription elongation complex
      1. Add 1 µl of RNAP core enzyme (1 µM stock in transcription buffer) to a 1.5 ml tube.
      2. Add 1 µl of purified sigma-70 factor (σ⁷⁰; 3 µM stock in transcription buffer) to the RNAP and incubate on ice for 10 min to form RNAP holoenzyme.
      3. Add 3 µl 500 nM purified template DNA (λ P_R promoter from the pIA226 PCR product) in transcription buffer to the RNAP holoenzyme and incubate at 37 ºC for 5 min to form the open complex.
      4. Prepare a mixture of reaction components in another 1.5 ml tube using 5 µl of 10x transcription buffer (Materials List: 400 mM Tris-HCl, 1.6 M KCl, 100 mM MgCl₂, 10 mM DTT, 50% glycerol, pH 7.9 in DEPC treated water), 2 µl of 250 µM each GTP and UTP, 1 µl of 1 mM ATP, and 1 µl of α-³²P UTP (3,000 Ci/mmol). Add DEPC treated water to 41 µl.
         Note: RNase inhibitor (Materials List) can be used to minimize the RNase contamination.
      5. Transfer the mixture solution to the tube containing the open complex and incubate at 37 ºC for 15 min to form the transcription elongation complex stopped at +26 nt.
      6. Move the reaction to room temperature (~21 °C) and add 1 µl of 2.5 mg/ml rifampicin to a final concentration of 50 µg/ml.
      7. Add 1 µl of 0.1 mM purified NusA to the reaction mixture and incubate for 5 min at room temperature.
      8. Add 2 µl of 250 µM CTP into the reaction mixture to make a final volume of 50 µl and measure the reaction time using a timer.
      9. Transfer 5 µl of the reaction solution into 2 µl of RNA gel loading buffer (95% formamide, 0.05% bromophenol blue and 0.05% xylene cyanol) at 30, 60, 120, 240, 480, and 1,200 sec to quench the reaction.
      10. Dispose the ³²P UTP tips and tubes in a radioactive waste container.
2. Transcription Initiation Assay
   1. Formation of the Open Complex 
      1. Dilute purified σ⁷⁰ to 0.5 µM.
      2. Repeat Steps 3.1.1.1 to 3.1.1.3 using 0.5 µM (instead of 3 µM) purified σ⁷⁰, and the DNA template (the P_xyl promoter region from pSG1154 PCR product).
   2. Inhibition of transcription initiation assay
      1. Add the inhibitor designed to prevent RNAP holoenzyme formation to RNAP core enzyme prior to addition of σ⁷⁰ (after step 3.1.1.1), followed by Steps 3.1.1.2 and 3.1.1.3 to examine whether the inhibitor is able to disrupt holoenzyme formation.
      2. Alternatively, after Step 3.1.1.2, add the inhibitor to examine whether it is able to competitively inhibit σ⁷⁰ binding to RNAP.
      3. Use the same amount of DMSO, the solvent of the inhibitor, instead of the inhibitor stock in control reactions.
   3. Completion of the reaction
      1. Dissolve heparin in water to a stock concentration of 1 mg/ml and stock at -20 °C.
         Note: Heparin is a competitor of DNA that can sequester RNAP that has not formed an open complex. Once the open complex is formed, heparin cannot enter the DNA binding site of RNAP and inhibit transcription from pre-formed open complex. Therefore, heparin is only required for single-round assays; it is not needed for multi-round assays.
      2. Prepare the reaction mixture using 5 µl of 10x transcription buffer (Materials List), 1 µl of 1 mg/ml heparin solution, 1 µl of 10 mM each ATP, GTP, and CTP, 2.5 mM UTP, and 1 µl of α-³²P UTP (3,000 Ci/mmol). Add DEPC treated water to 45 µl.
      3. Mix the reaction mixture with the transcription open complex, pulse spin and incubate at 37 °C for 20 min.
      4. Transfer 10 µl of the reaction solution into 5 µl of RNA gel loading buffer (95% formamide, 0.05% bromophenol blue and 0.05% xylene cyanol) to quench the reaction.

4. RNA Gel Running and Development

1. Running the Denaturing Polyacrylamide Gel
   1. Run the gel at 50 ºC and 50 W in 1x TBE buffer for approximately 1.5 hr until the temperature of the gel and the buffer is stable at 50 ºC.
   2. Heat samples at 90 ºC for 30 sec and move them onto ice prior loading onto the gel.
   3. Load samples into the wells on the top of the gel alongside one lane containing 2 µl RNA ladder (1:100 dilution).
   4. Run the gel at 50 W and 50 ºC in 1x TBE buffer until the bromophenol blue dye reaches ~2/3 down the gel.
2. Gel Treatment
   1. Open slowly and carefully separate the upper plate from the sequencing cell. Take great care to avoid breaking the gel.
   2. Cut chromatography paper (Materials List) to match the gel size from the top to the bromophenol blue dye. Use a Geiger counter to confirm the approximate position of radioactively labelled RNA transcripts.
   3. Carefully cover the gel with the filter paper, and press firmly till the gel adheres to the filter paper. Cut off and discard the bottom of the gel to radioactive waste as the unincorporated NTPs run to the bottom of the gel, which can be very hot.
   4. Place a similar sized piece of filter paper on the drying bed of a vacuum-drying machine, and carefully lay the gel-coated paper onto it with the gel side up.
   5. Cover the gel with a plastic wrap and dry at 60 °C for 1.5 hr.
   6. Wrap the other side of the gel coated filter paper with plastic wrap, and place on a photostimulable phosphor plate in the imaging case, with the appropriate exposure time, which can vary from 1 hr to overnight depending on the reaction efficiency.
   7. Image the phosphor plate using an imager scanner according to manufacturer's instructions. Determine the relative band intensity using ImageJ software according to the software manual.
   8. Use a Geiger counter to check the radioactive contamination in the work area, wipe the suspected items and area with tissue and a cleaning agent and dispose the tissue in the disposal container.

Results

Transcription efficiency can be determined by measuring the level of radiation in the bands at different time points. The pausing assay to test the function of NusA factor enabled visualization of the pause, termination, and run-off products (Figure 1A). In the presence of the N-terminal domain of NusA (NusA NTD; amino acid residues 1-137), appearance of the RNA products was significantly delayed compared to the control experiment lacking NusA. Deletion of amino acid resi...

Discussion

In all organisms, transcription is a tightly regulated process. In vitro transcription assays have been developed to provide a platform for testing the effects of transcription factors, small molecules and transcription inhibitors. In this method paper, an assay for general bacterial transcription was described. Transcription assays combined with sequencing gel electrophoresis of transcripts are very important for mechanistic studies as they allow visualization of all the transcription products along a timeline....

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
Obtain the proteins required for transcription assay
E. coli RNAP	Epicentre	S90250
Preparation of DEPC-treated water
diethyl pyrocarbonate (DEPC)	Sigma-Aldrich	D5758
RNase-free water
Ambion Nuclease-Free Water	ThermoFisher	AM9937
DNA template preparation
Wizard Plus SV Minipreps DNA Purification System	Promega	A1330
ACCUZYME Mix	Bioline	BIO-25028
PCR primers
Wizard SV Gel and PCR Clean-Up System	Promega	A9281
NanoDrop 3300 fluorospectrometer	Thermo Scientific	ND-3300
NTP Preparation
ATP	Sigma-Aldrich	A6559
UTP	Sigma-Aldrich	U1006
GTP	Sigma-Aldrich	G3776
CTP	Sigma-Aldrich	C9274
High Purity rNTPs	GE Healthcare	27-2025-01
α-32P UTP	PerkinElmer	BLU007C001MC	Radioactive compound
RNA ladder preparation
Novagen Perfect RNA Marker Template Mix 0.1–1 kb	Millipore	69003
HEPES	Sigma-Aldrich	H7006
Sodium chloride	Sigma-Aldrich	S7653
Magnesium chloride	Sigma-Aldrich	M8266
DTT	Sigma-Aldrich	DTT-RO
T7 RNAP	Promega	P2075
Gel preparation
Sequi-Gen GT nucleic acid sequencing cell	Bio-Rad	165-3804
Sigmacote	Sigma-Aldrich	SL2
urea	Sigma-Aldrich	U6504
tris(hydroxymethyl)aminomethane	Sigma-Aldrich	154563
boric acid	Sigma-Aldrich	B7901
ethylenediaminetetraacetic acid	Sigma-Aldrich	ED
40% Acrylamide/bis-acrylamide	Sigma-Aldrich	A9926
ammonium persulfate	Sigma-Aldrich	A3678
N,N,N',N'-Tetramethylethylenediamine (TEMED)	Sigma-Aldrich	T9281
Transcription Assay
Potassium chloride	Sigma-Aldrich	P9541
glycerol	Sigma-Aldrich	G5516
rifampicin	Sigma-Aldrich	R3501
formamide	Sigma-Aldrich	F9037
bromophenol blue	Sigma-Aldrich	B0126
xylene cyanol	Sigma-Aldrich	X4126
heparin	Sigma-Aldrich	84020
RNasin Ribonuclease Inhibitor	Promega	N2511
Transcription buffer
Tris base	Sigma-Aldrich	T1503
Potassium chloride	Sigma-Aldrich	P9541
Magnesium chloride	Sigma-Aldrich	M2393
DTT	Sigma-Aldrich	DTT-RO
glycerol	Sigma-Aldrich	G5516
Filter paper
Whatman 3MM Chr Chromatography Paper	Fisher Scientific	05-714-5
Radioactive decontaminant
Decon 90	decon	decon90
Gel Treatment
Typhoon Trio+ imager	GE Healthcare Life Sciences	63-0055-89