Obtaining High-Quality Cryosections of Whole Rabbit Eye

Summary

This protocol describes a reliable method for obtaining high-quality cryosections of whole rabbit eyes. It details rabbit eye dissection, fixation, embedding, and sectioning procedures, which may be easily adapted for use in any study utilizing immunohistochemistry in larger eyes.

Abstract

This protocol describes how to obtain high-quality retinal cryosections in larger animals, such as rabbits. After enucleation, the eye is briefly immersed in the fixative. Then, the cornea and iris are removed and the eye is left overnight for additional fixation at 4 °C. Following fixation, the lens is removed. The eye is then placed in a cryomold and filled with an embedding medium. By removing the lens, the embedding medium has better access to the vitreous and leads to better retinal stability. Importantly, the eye should be incubated in embedding medium overnight to allow complete infiltration throughout the vitreous. Following overnight incubation, the eye is frozen on dry ice and sectioned. Whole retinal sections may be obtained for use in immunohistochemistry. Standard staining protocols may be utilized to study the localization of antigens within the retinal tissue. Adherence to this protocol results in high-quality retinal cryosections that may be used in any experiment utilizing immunohistochemistry.

Introduction

The retina is composed of several layers of specialized cells within the eye that together work to convert light into neural signals. Because the retina plays a critical role in vision, understanding its structure and function can provide valuable insights into some of the most common causes of vision loss such as macular degeneration and diabetic retinopathy, among others.

Rabbits serve as a convenient animal model in retinal research as they offer several advantages compared to other models. Rabbit eyes are relatively similar in anatomy to human eyes^1,2. For example, rabbits have an area of increased photoreceptor density, known as the horizontal visual streak, that is analogous to the fovea in humans. Other commonly used animal models, such as rodents, do not have an anatomic equivalent. In addition, compared to rodents, the retinal vasculature in rabbits is fairly similar to that in humans. Rabbit eyes are relatively large as well. This makes them particularly suitable for studies that involve drug administration or surgical intervention within the vitreous or retina that may otherwise be difficult or impossible in a smaller eye³.

Immunohistochemistry (IHC) is a widely used technique to study the localization of antigens within a tissue and has broad applications in retinal research^4,5,6. Because the retina is a delicate structure, obtaining useful results via IHC requires careful tissue processing. Retinal detachment and other tissue artifacts such as retinal breaks or folds commonly occur during processing and may interfere with the interpretation of results. Successful processing depends on a variety of factors, including tissue manipulation, type and duration of fixation, type of embedding media, and sectioning techniques^7,8,9,10. Despite the advantages of using rabbits as an animal model in retinal research, very few protocols describing successful tissue processing of the rabbit retina exist. This paper describes a reliable method for obtaining high-quality retinal sections from whole rabbit eyes for use in IHC.

Protocol

All procedures were carried out in compliance with and approved by the Institutional Animal Care and Use Committee (IACUC) of the University of Southern California. Fourteen (n = 14) Dutch-belted rabbits between 4 and 6 months of age were used in the development of this protocol. Both male and female animals were used. All animals weighed between 2.0 and 2.5 kg. All animals were singly housed. A list of recommended materials and equipment can be found in the Table of Materials.

1. Preparation

1. Fixative preparation.
   1. Prepare 4% paraformaldehyde (PFA) in phosphate-buffered saline (PBS). At a minimum, 50 mL of fixative is required per eye.
2. Cryoprotective agent preparation.
   1. Prepare 30% weight by volume (w/v) sucrose in PBS. Place on a shaker for at least 15 min to ensure that the sucrose is completely dissolved. At a minimum, 50 mL of cryoprotective agent is required per eye.
3. Dissection instrument preparation.
   1. Gather two pairs of forceps, one pair of curved scissors, one scalpel blade, and a 100 mm dissection dish and place them near a dissection microscope. An example setup is shown in Figure 1A.

2. Initial fixation

1. Following trans-conjunctival enucleation¹¹, immediately place the eye in at least 50 mL of 4% PFA in PBS on ice. Ensure that the eye is completely submerged. If air bubbles collect on the outer surface of the eye, remove them by gently shaking.

3. Cornea and iris removal

1. After 15 min, remove the eye from 4% PFA in PBS and place it in a 100 mm dissection dish under a dissecting microscope. Fill the dish with PBS to prevent the eye from drying out.
2. Remove the cornea.
   1. Begin by creating an incision with a surgical blade 1 mm anterior to the limbus, parallel to the iris plane to avoid accidentally puncturing underlying structures (Figure 1B).
   2. Insert curved scissors into the initial incision and continue cutting circumferentially while remaining 1 mm from the limbus. Use forceps to stabilize the eye while cutting (Figure 1C).
   3. Once the circumferential cut is complete, remove the cornea with forceps and gently wipe away excess PBS with a laboratory wipe. Place the cornea in 30% sucrose solution at room temperature (RT) for cryoprotection or discard. Cryoprotection is complete when the cornea sinks, which typically takes less than 1 h.
3. Remove the iris.
   1. Begin by making an initial cut with curved scissors through the iris. Completely separate the iris from the rest of the tissue by cutting circumferentially similar to cornea removal (Figure 1D).
   2. Once the circumferential cut is complete, remove the iris with forceps and gently wipe away excess PBS with a laboratory wipe. Place the iris in 30% sucrose solution at RT for cryoprotection or discard as above. Cryoprotection is complete when the iris sinks, which typically takes less than 30 min.

4. Completion of fixation

1. With the cornea and iris removed, place the eye in at least 50 mL of freshly prepared 4% PFA in PBS and put it on a shaker for gentle agitation. Ensure the eye remains submerged during agitation.
2. Keep the eye in 4% PFA in PBS at 4 °C overnight.
   ​NOTE: We have found that 4% PFA results in excellent IHC staining if used between 16 h and 24 h at 4 °C, with longer fixation durations resulting in increased nonspecific background staining and epitope masking.

5. Lens removal

1. The following morning, remove the eye from 4% PFA in PBS and place it in a 100 mm dissection dish under a dissecting microscope. Fill the dish with PBS to prevent the eye from drying out.
2. Remove the lens.
   1. Begin by carefully grasping the anterior lens capsule with forceps.
      NOTE: Be extremely careful not to forcefully push or pull on the lens with the forceps as this can create a retinal detachment.
   2. Carefully insert the scissors into the posterior chamber with the blades curved posteriorly along the lens. Make an initial cut through the lens zonules with curved scissors.
      NOTE: Be extremely careful not to forcefully push or pull on the zonules with the scissors as this can create a retinal detachment (Figure 1E).
   3. Continue to make small cuts through the lens zonules in a circumferential pattern. Make three to five cuts per clock hour.
   4. To check if the lens is separated from the rest of the tissue, gently grasp the anterior lens capsule with forceps and attempt to lift it gently. If the lens does not immediately lift, do not attempt to pull more as this can create a retinal detachment. Instead, make more cuts through the remaining lens zonules and reattempt.
   5. Once separated from the rest of the tissue, place the lens in 30% sucrose solution at RT for cryoprotection or discard as above. Cryoprotection is complete when the lens sinks, which typically takes a few hours.
3. Place the eye in at least 50 mL of 30% sucrose in PBS at 4 °C for cryoprotection. Cryoprotection is complete when the eye sinks, which typically takes 24-48 h. To expedite cryoprotection, exchange the initial sucrose solution with a fresh one after 8-12 h and/or keep the eye in sucrose solution at RT.

6. Embedding

1. Once cryoprotection is complete, remove the eye from 30% sucrose solution and place it in a 100 mm dissection dish under a dissecting microscope. Carefully flip the eye so it faces downward to remove excess sucrose solution from the inner part of the eye.
   NOTE: Do not attempt to remove excess solution from the inner part of the eye with a laboratory wipe as the wipe can stick to the vitreous body and result in a retinal detachment.
2. With the eye facing downward, gently wipe away excess sucrose solution from the outer part of the eye using a wipe.
3. Fill a disposable embedding mold with optimal cutting temperature (OCT) compound to a depth of 0.5-1.0 cm.
   NOTE: This base ensures the eye will not touch the bottom of the mold, which interferes with cryosectioning later.
4. Place the eye in the disposable embedding mold facing upward. Slowly fill the inner part of the eye with OCT taking special care to avoid bubble formation within the eye. If bubbles do form, carefully remove them or push them to the edge of the mold using forceps.
5. Finish filling the disposable embedding mold with OCT. Ensure the eye is completely submerged in OCT and is not touching the inner surfaces of the mold or exposed to the air. Wrap the disposable embedding mold containing the eye in OCT in parafilm; place at 4 °C overnight.
   NOTE: In our experience, shorter incubation periods do not allow OCT to completely infiltrate the vitreous. As a result, a layer of sucrose often remains in between the retina and OCT. When this occurs, the retina often detaches or completely tears away from the rest of the tissue during cryosectioning as frozen sucrose likely provides less structural support than frozen OCT, making high-quality sections difficult or even impossible to obtain.
6. The following morning, place the embedding mold containing the eye in OCT in a 100 mm dissection dish under a dissecting microscope. Confirm that the posterior hyaloid membrane appears lifted upward from the inner retina.
   NOTE: This upward lifting may obscure the view of the retina, making orientation difficult to determine.
7. To better determine the orientation of the eye, carefully grasp the posterior hyaloid membrane anteriorly and attempt to peel it away with forceps to expose the underlying retina while in OCT.
   NOTE: At times, the hyaloid canal may be visible, which attaches to the optic nerve head and can be used for orientation purposes since the optic nerve head is located in the superior portion of the retina (Figure 2A). It is not necessary to completely remove the posterior hyaloid membrane as OCT has already infiltrated the vitreous body to line the inner retina and any remaining membrane will not affect cryosectioning (Figure 2B). The posterior hyaloid membrane should only be removed for orientation, if necessary. Other options for determining orientation include placing a suture or other type of mark prior to enucleation.
8. Transfer the eye to a new embedding mold with new OCT filled to a depth of 0.5-1.0 cm and then fill with new OCT as in steps 6.3-6.5 to ensure that the final embedding medium is free of debris and/or other imperfections that may have accumulated overnight. If possible, gently remove OCT with a wipe from the inside of the eye as well, although this is not necessary.
9. Label the mold for orientation purposes (Figure 2C). Orienting the eye with the eye facing upward in the cryo mold ensures that OCT will line the inner retina. The hyaloid canal, which attaches to the optic nerve head, is an important landmark for determining the superior part of the eye (Figure 2A).
10. Place the labeled embedding mold containing the eye in OCT on top of dry ice. Ensure that the eye is not touching any of the inner surfaces of the embedding mold or exposed to air. Ensure the mold is directly touching the dry ice to speed up the freezing process (Figure 2D).
11. Transfer the embedded eye to a -80 °C freezer or directly to the cryostat for sectioning (Figure 2E).

7. Cryosectioning

1. Mount the block with the superior part of the eye facing superiorly and the inferior part of the eye facing inferiorly, with the remaining cornea and iris facing to the right (as in Figure 2E) or left (not shown). Alternatively, mount the block with a different orientation, as desired. If necessary, break the mold to mobilize the block by carefully breaking off each side of the mold one at a time and marking the block directly to not lose the orientation of the eye.
2. Allow the block to equilibrate to the temperature within the cryostat for 30-60 min; -20 °C is a good starting point.
3. Once mounted, place a fresh blade at the desired angle, typically parallel to the vertical axis of the eye.
4. Set the section thickness as desired: 10-20 µm thick sections are a good starting point. An example of a 14 µm thick section is demonstrated in Figure 3A-C.
   1. In a slow and controlled manner, begin sectioning through the block. Ensure the blade is cutting the block parallel to the vertical axis of the eye. If not, adjust the angle the blade contacts the block or stage orientation accordingly.
   2. While sectioning the block, prevent wrinkling or curling of the section with a brush. Quickly flip the section over and apply gentle pressure downward with a long-haired brush to flatten the section and minimize wrinkling or curling. Fashion a separate brush with a pointed tip to help manipulation of the section.
5. Attach the section to a charged glass slide by slowly moving the slide facing downward toward the section. Prevent the section from folding on itself or otherwise distorting itself during attachment by gently rolling the glass slide over the section.
   NOTE: Do not hover the slide directly over the section or press it against the section as this can damage or distort the section.
6. Allow the slides to dry overnight before transferring to a -80 °C freezer or proceeding directly to a standard immunofluorescence protocol.

Results

After tissue processing, a standard immunofluorescence protocol may be utilized to investigate any number of biological processes within the retina. Figure 3A-C illustrate representative fluorescence images of a retinal section obtained via confocal microscopy. The retinal section was immunostained according to a previously described protocol¹².

The representative retinal sections shown in

Discussion

Prior to implementing the above protocol, we consistently faced difficulties with the tissue processing of rabbit eyes for IHC. We had adapted several protocols from the eyes of smaller animals such as mice but found these to lead to inadequate fixation and difficulty with tissue sectioning. There are several important considerations that allow for consistent, high-quality sections of the rabbit retina.

One consideration is the large size of the rabbit globe in comparison to other commonly use...

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
100 mm culture dish	Corning	353025	Used for dissection (steps 1.3, 3, and 5)
50 mL tube	Genesee Scientific	28-106	For fixation and cryoprotection (step 1)
Cryostat	Leica	CM1850	For cryosectioning (step 7)
Curved scissors	Fine Science Tools	91500-09	Used for dissection (steps 1.3, 3, and 5)
DAPI	Fisher Scientific	D3571	Diluted 1:1,000 in blocking buffer
Dissection microscope	Zeiss	Stemi 2000-C	Used for dissection (steps 1.3, 3, and 5)
Donkey anti-Goat 488	Fisher Scientific	A-11055	Diluted 1:1,000 in blocking buffer
Donkey anti-Mouse 555	Fisher Scientific	A-31570	Diluted 1:1,000 in blocking buffer
Forceps	Fine Science Tools	91150-20	Used for dissection (steps 1.3, 3, and 5)
Glass Slide Cover	VWR	48404-453	For cryosectioning (step 7)
Goat anti-SOX2	R&D Systems	AF2018	Diluted 1:100 in blocking buffer
High-profile disposable cryostat blades	Leica Microsystems Inc.	14035838926	For cryosectioning (step 7)
Kimwipe	Fisher Scientific	06-666-A	Used to wipe away excess PBS or OCT (steps 3 and 6)
Mouse anti-RPE65	Novus Bio	NB100-355SS	Diluted 1:100 in blocking buffer
OmniPur Sucrose	Millipore	167117	Used for cryoprotectant (step 1.2)
Paraformaldehyde 20% solution	Electron Microscopy Sciences	15713	Used as tissue fixative (diluted to 4% in step 1.1)
Peel-A-Away Disposable Embedding Mold (22x22x20 mm Deep)	Polysciences, Inc.	18646A	Used as embedding mold (step 6)
Phosphate buffered saline, 1x	Corning	21-030-CV	Used in preparation of fixative (step 1.1) and cryoprotectant (step 1.2)
Scalpel blade no. 15	Feather	08-916-5D	Used for dissection (steps 1.3, 3, and 5)
Superfrost Plus Microscope Slides	Fisher Scientific	12-550-15	For cryosectioning (step 7)
Tissue-Tek O.C.T. Compound	Sakura	4583	Used as embedding media (step 6)