Pinning Bed Assembly
Pinning Bed Assembly - Related Videos
01:20
Capillary Beds
0 Views •
2024
Capillary beds are networks of tiny blood vessels that play a crucial role in the circulatory system. These beds are where the exchange of gases, nutrients, and waste products occurs between the blood and surrounding tissues. Each capillary bed consists of numerous capillaries, which are the smallest blood vessels in the body, typically only one cell-thick. This thinness allows for the efficient diffusion of substances. Capillaries connect arterioles, small branches of arteries, to venules,...
10:39
Single and Two-phase Flow in a Packed Bed Reactor
0 Views •
2023
Source: Kerry M. Dooley and Michael G. Benton, Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA The goal of this experiment is to determine the magnitude of maldistribution in typical packed bed reactors in both single phase and two-phase (gas-liquid) flow and evaluate the effects of this maldistribution on pressure drop. The concepts of residence time distribution and dispersion are introduced through the use of tracers, and these concepts are related to physical...
06:55
Using Single Sensillum Recording to Detect Olfactory Neuron Responses of Bed Bugs to Semiochemicals
0 Views •
Cited by 3 •
2016
Bed bugs rely on olfactory receptor neurons housed in their antennal olfactory sensilla to detect semiochemicals in the environment. Utilizing single sensillum recording, we demonstrate a method to evaluate bed bug response to semiochemicals and explore the coding process involved.
01:21
Euler's Formula for Pin-Ended Columns
0 Views •
2024
In structural engineering, the stability of columns under compressive axial loads is a critical consideration, described as buckling. A typical example involves a column PQ, which is pin-connected at both ends and subjected to a centric axial load F applied at one end, with a reaction force of F' = -F at the other end. Here, it is crucial to understand that when an applied load exceeds the critical load, buckling occurs as the system becomes unstable. To calculate the critical load, envision...
11:36
Assembly, Loading, and Alignment of an Analytical Ultracentrifuge Sample Cell
0 Views •
Cited by 21 •
2009
The analytical ultracentrifuge (AUC) sample cell holds sample and reference buffer and during experiments and is exposed to high vacuum and rotor speeds up to 60,000 rpm. This video will demonstrate the rigorous attention to detail necessary for assembly, loading and alignment of this very important component of an AUC experiment.
FAQs
The resilient bed provides a penetrable support surface, while fine pins hold selected regions of the tissue in place. This combination limits unwanted movement without requiring rigid compression. Researchers can therefore expose anatomical structures and perform precise manipulations while preserving the specimen’s position and reducing movement-related distortion during dissection or examination.
The shallow chamber allows the specimen to remain immersed in an appropriate buffer or solution while it is secured. Immersion supports the preparation conditions needed during handling and examination, whereas the chamber keeps the solution around the tissue. This arrangement is especially relevant when delicate specimens must be manipulated without losing their position.
Positioning and gentle tension can spread or expose selected anatomical regions, making structures easier to inspect or manipulate. Maintaining a consistent orientation also helps researchers compare preparations and perform more reproducible dissections. The assembly is useful because it supports access to tissue while avoiding excessive movement or deformation that could obscure anatomical relationships.
A typical setup places the resilient bed inside the shallow chamber, adds the appropriate buffer or solution, and positions the specimen for examination. Fine pins then anchor selected areas while maintaining the desired orientation and gentle tension. The resulting preparation provides a stable working surface for dissection, imaging, or other precise manipulations.
Researchers would choose it when a specimen is delicate, small, or difficult to keep still during preparation. Immobilization is particularly valuable for dissection and microscopic examination, where movement can interfere with access to anatomical structures. The system also supports physiological studies and imaging when maintaining the specimen’s placement in solution is important.
By preserving position and orientation, the assembly supports clearer anatomical exposure, more controlled manipulations, and more reproducible preparations. These characteristics make it useful for microscopic imaging, dissection, and physiological studies involving delicate tissues or small model-organism specimens. Its main contribution is improving the consistency and practicality of handling during observation and experimentation.