Cyclic Wet Dry
Cyclic Wet Dry - Related Videos
08:59
Dry Oxidation and Vacuum Annealing Treatments for Tuning the Wetting Properties of Carbon Nanotube Arrays
0 Views •
Cited by 11 •
2013
This article describes a simple method to fabricate vertically aligned carbon nanotube arrays by CVD and to subsequently tune their wetting properties by exposing them to vacuum annealing or dry oxidation treatment.
08:37
Cyclic Voltammetry (CV)
0 Views •
2023
Source: Laboratory of Dr. Kayla Green — Texas Christian University A Cyclic Voltammetry (CV) experiment involves the scan of a range of potential voltages while measuring current. In the CV experiment, the potential of an immersed, stationary electrode is scanned from a predetermined starting potential to a final value (called the switching potential) and then the reverse scan is obtained. This gives a 'cyclic' sweep of potentials and the current vs. potential curve derived from the data is...
11:14
Combining Wet and Dry Lab Techniques to Guide the Crystallization of Large Coiled-coil Containing Proteins
0 Views •
Cited by 2 •
2017
We describe a framework incorporating straightforward biochemical and computational analysis to guide the characterization and crystallization of large coiled-coil domains. This framework can be adapted for globular proteins or extended to incorporate a variety of high-throughput techniques.
13:24
Integration of Wet and Dry Bench Processes Optimizes Targeted Next-generation Sequencing of Low-quality and Low-quantity Tumor Biopsies
0 Views •
Cited by 2 •
2016
An integrated system for targeted next-generation sequencing of oncology specimens is described. This cross-platform system is optimized for low-quality and low-quantity tumor biopsies, accommodates low DNA inputs, includes well-characterized multi-variant controls, and features a novel variant caller that is informed by quantitative pre-analytical quality control measures.
07:52
Removal of Branched and Cyclic Compounds by Urea Adduction for Uk'37 Paleothermometry
0 Views •
2023
Source: Laboratory of Jeff Salacup - University of Massachusetts Amherst As mentioned in previous videos, the product of an organic solvent extraction, a total lipid extract (TLE), is often a complex mixture of hundreds, if not thousands, of different compounds. The researcher is often only interested in a handful of compounds. In the case of our two organic paleothermometers (Uk'37 and MBT/CBT), the interest is in only 6 compounds (2 alkenones and 4 isoprenoidal glycerol dialkyl glycerol...
FAQs
Damage develops when water penetrates pores, joints, or surface defects and later evaporates during drying. This repeated movement can create dimensional changes, chemical concentration, and stress gradients within the material. Over successive cycles, these conditions may initiate cracking, corrosion, or surface deterioration, revealing how environmental fluctuations affect durability rather than merely measuring behavior under constant moisture.
Alternating moisture and drying introduces changing internal conditions instead of a stable environment. Wet periods allow water entry, while drying can produce shrinkage, concentration effects, and stress gradients. Repeating that sequence helps engineers examine damage associated with environmental change, including crack initiation and deterioration processes that are relevant to materials exposed to fluctuating service conditions.
Performance depends on how a material responds to water entry, evaporation, and the resulting dimensional or stress changes. Pores, joints, and surface defects are important because they provide pathways for moisture penetration and locations where deterioration may begin. Comparing concrete, soils, coatings, metals, and other construction materials can therefore expose different durability weaknesses and failure mechanisms.
An engineering test applies repeated periods of moisture followed by drying to the material or structure under evaluation. The specimen is exposed to water, allowed to dry, and then subjected to the sequence again for the planned comparison. Engineers examine resulting cracking, corrosion, surface deterioration, or other changes to assess durability and identify possible failure mechanisms.
Engineers use alternating moisture and drying to simulate service environments in which construction materials experience changing environmental conditions. The approach supports durability comparisons among concrete, soils, coatings, metals, and related materials. It can also help evaluate protective treatments, guide material selection, and provide evidence for designing infrastructure with greater resistance to environmental deterioration.
Test results can show whether repeated environmental changes initiate cracking, corrosion, or surface deterioration and can indicate the mechanisms responsible. Engineers use those observations to compare materials or protective treatments, support service-life prediction, and assess durability. In engineering design, the findings contribute to selecting materials and developing infrastructure intended to remain resilient under changing exposure conditions.