Passive Stretch Cycles
Passive Stretch Cycles - Related Videos
09:41
Stretching Micropatterned Cells on a PDMS Membrane
0 Views •
Cited by 6 •
2014
This manuscript presents a technique to apply or release forces on adherent cells or tissues using unidirectional stretching.
07:42
Live Cell Imaging during Mechanical Stretch
0 Views •
Cited by 12 •
2015
A novel imaging protocol was developed using a custom motor-driven mechanical actuator to allow the measurement of real time responses to mechanical strain in live cells. Relevant to mechanobiology, the system can apply strains up to 20% while allowing near real-time imaging with confocal or atomic force microscopy.
12:38
Three-dimensional Reconstruction of the Vascular Architecture of the Passive CLARITY-cleared Mouse Ovary
0 Views •
Cited by 12 •
2017
Here we present an adaptation of the passive CLARITY and 3D reconstruction method for visualization of the ovarian vasculature and follicular capillaries in intact mouse ovaries.
16:46
A Novel Stretching Platform for Applications in Cell and Tissue Mechanobiology
0 Views •
Cited by 6 •
2014
We present in this article a novel stretching platform that can be used to investigate single cell responses to complex anisotropic biaxial mechanical deformation and quantify the mechanical properties of biological tissues.
10:34
Characterization and Application of Passive Samplers for Monitoring of Pesticides in Water
0 Views •
Cited by 6 •
2016
A protocol about the characterization and application of five different passive sampling devices is presented.
FAQs
The loading and unloading phases are central to the response produced by passive stretch cycles. Applying a controlled load can influence soft-tissue extensibility and joint range of motion, while releasing the load permits the sequence to be repeated. This repeated exposure makes the approach relevant to evaluating and managing restricted mobility.
Controlled progression determines how the stretched tissue or joint is exposed to the applied force. A clinician or device may maintain the position or gradually progress it before releasing the load. Keeping these changes controlled helps connect the cycle with measurable effects on extensibility, range of motion, and stiffness-related responses.
A clinician can apply and regulate the stretch directly, or a mechanical device can provide the external force. Both approaches use the same basic sequence of loading, maintaining or progressing the position, releasing the load, and repeating it. The delivery choice therefore affects how the controlled movement is administered during mobility assessment or management.
The essential procedural elements are the applied force, the stretch position, the period of maintenance or progression, and the release before repetition. These elements should follow a controlled sequence rather than an irregular movement pattern. Such consistency supports clearer assessment of mobility and helps clinicians manage soft-tissue or joint stiffness systematically.
In rehabilitation, passive stretch cycles can support mobility training and help address limited movement associated with stiffness. They are also relevant to contracture management, where maintaining or improving available joint motion is an important clinical goal. Because the individual remains relaxed, the procedure focuses on externally guided movement rather than voluntary muscle activation.
These cycles provide a way to examine musculoskeletal function and tissue adaptation under repeated loading and unloading. Researchers can consider changes in soft-tissue extensibility, joint range of motion, and stiffness responses across the sequence. This makes the approach useful for connecting controlled mechanical movement with broader questions about mobility and tissue behavior.