Question 1

Why can't a heat engine achieve 100% efficiency?

Accepted Answer

According to the Second Law of Thermodynamics, no heat engine can convert all absorbed heat into work. Work is lost as heat in all irreversible processes. Since heat flow through a finite temperature drop is inherently irreversible, some energy must always be rejected to the cold reservoir, making perfect efficiency impossible.

Question 2

What is the Carnot cycle and why did Sadi Carnot develop it?

Accepted Answer

Sadi Carnot developed a hypothetical heat engine cycle to determine the maximum theoretical efficiency of any heat engine. The Carnot cycle operates between two temperature reservoirs and uses only reversible processes: isothermal expansion and compression, plus adiabatic expansion and compression. This idealized cycle establishes the theoretical efficiency limit for all real heat engines.

Question 3

What are the four stages of the Carnot cycle?

Accepted Answer

The Carnot cycle consists of four stages: isothermal expansion where the gas absorbs heat from a hot reservoir, adiabatic expansion where temperature drops to match the cold reservoir, isothermal compression where heat is rejected to the cold reservoir, and adiabatic compression returning the gas to its initial state. Each stage is reversible and involves an ideal gas.

Question 4

How do isothermal and adiabatic processes prevent irreversibility in the Carnot cycle?

Accepted Answer

Isothermal heat exchange occurs at constant temperature, eliminating temperature drops that cause irreversibility. Adiabatic processes change temperature without heat transfer, avoiding irreversible heat flow. By combining these reversible processes, the Carnot cycle minimizes energy loss and achieves the maximum possible efficiency for any heat engine operating between two temperature reservoirs.

Question 5

Why must heat exchange in the Carnot cycle be isothermal?

Accepted Answer

Heat flow through a finite temperature difference is an irreversible process that wastes energy. To maximize efficiency, the Carnot cycle requires heat exchange to occur isothermally, meaning at constant temperature. This eliminates the temperature gradient that causes irreversibility, allowing the engine to extract maximum work from the heat absorbed.

Question 6

What assumption does the Carnot cycle make about the working fluid?

Accepted Answer

The Carnot cycle assumes the working fluid is an ideal gas. This simplification allows the cycle to be analyzed theoretically and provides a benchmark for comparing real heat engine performance. The ideal gas assumption enables precise calculation of the maximum theoretical efficiency achievable between any two temperature reservoirs.

Question 7

How does the Carnot cycle relate to defining absolute temperature?

Accepted Answer

The Carnot cycle operates between only two temperature reservoirs and follows the Second Law of Thermodynamics. This unique property allows the cycle to define an absolute temperature scale that is independent of any specific substance used for measurement, providing a universal standard for temperature that applies to all materials.

Karnot Çevrimi

Browse More Videos