22.4
İletki Yoluyla şarj Yapma
Dünya, elektrik iletişimine iyi bir iletken olup büyük olduğundan dolayı sonsuz bir yük kaynağı veya gideri olarak düşünülebilir. Herhangi bir madde i…
Negatif olarak şarj etmek için plastik bir çubuğu kürke sürtün.
Yalıtkan plastik bir stand ile desteklenen iletken bir metalik küre alın.
Yüklü çubuk nötr küreye yaklaştırıldığında, kürenin içindeki serbest elektronlar ondan uzaklaştırılır.
Daha fazla serbest elektron hareket etmeye çalıştıkça, zaten hareket etmiş olanlar tarafından da itilirler. Elektronlar, herhangi bir serbest elektron üzerinde net kuvvet olmayacak şekilde dağılır.
İletkenin uzak ucunda daha fazla serbest elektron birikmiş ve daha yakın ucun net bir pozitif yük taşımasına neden olmuştur. İki kutup zıt olarak yüklü veya polarizedir. Böyle bir yük dağılımına dipol denir.
Küre Dünya'ya başka bir metalik tel ile bağlanırsa, serbest elektronlar Dünya'ya hareket eder. Tel çıkarıldığında, küre net bir pozitif yük taşır. Bu işleme indüksiyon denir.
Negatif yüklü plastik çubuk herhangi bir yük kaybetmez veya kazanmaz. İndüksiyon, iletken ile Dünya arasında bir yük alışverişi ile sonuçlanır.
View the full transcript and gain access to JoVE Core videos
Q1: What happens to free electrons when a charged rod approaches a neutral conductor?
Free electrons inside the conductor are repelled away from the charged rod. As more electrons move, they repel others already displaced, creating a distribution where no electron experiences net force. This redistribution leaves the end closer to the rod positively charged and the far end negatively charged, establishing an electric dipole.
Q2: How does grounding enable a conductor to become permanently charged by induction?
When a polarized conductor is grounded via a metallic wire, free electrons flow to or from Earth, which acts as an infinite source or sink of charge. After removing the wire, the conductor retains a net charge opposite to the inducing charge. This permanent charge transfer distinguishes induction from temporary polarization.
Q3: Why is the charge distribution on an induced conductor called a dipole?
A dipole consists of two oppositely charged poles. During induction, the conductor develops a positive charge at one end and negative charge at the other, creating this two-pole configuration. Although the conductor has no net charge initially, the spatial separation of opposite charges defines the dipole structure.
Q4: What role does Earth play in the induction charging process?
Earth is a good conductor and effectively an infinite source or sink of charges due to its size. When a conductor is grounded, Earth exchanges charges with it, allowing excess electrons to flow away or additional electrons to arrive. This charge exchange is essential for converting temporary polarization into permanent net charge on the conductor.
Q5: Does the inducing charged object lose charge during the induction process?
No, the inducing charged object does not lose or gain any charge during induction. The negatively charged rod, for example, remains negatively charged throughout. Induction involves only charge redistribution within the conductor and charge exchange between the conductor and Earth, not transfer from the inducing object.
Q6: How does polarization differ from permanent charging in conductors?
Polarization occurs when a charged object redistributes free electrons in a nearby conductor without grounding, creating temporary opposite charges at each end. Permanent charging requires grounding, which allows charge to flow to or from Earth. Once the inducing object is removed, polarization disappears, but permanent charge remains on the grounded conductor.
Q7: Why do free electrons in a conductor reach an equilibrium distribution during induction?
Free electrons move until they reach a configuration where no electron experiences net attractive or repulsive force. Initially, electrons are attracted toward the positive inducing object, but as they accumulate, they repel incoming electrons. Equilibrium is reached when these opposing forces balance, stabilizing the charge distribution across the conductor.