Question 1

When should you use direct titration with EDTA instead of back-titration?

Accepted Answer

Direct titration works best when metal ions react quickly with EDTA and don't interfere with indicator visibility. The metal ion solution is buffered to the desired pH and directly titrated with standard EDTA until the endpoint is reached. However, if metal ions react too slowly, block indicators, or precipitate without EDTA, back-titration becomes necessary instead.

Question 2

What is the purpose of auxiliary complexing reagents in EDTA titrations?

Accepted Answer

Auxiliary complexing reagents prevent metal hydroxide precipitation and maintain the concentration of free metal ions in solution during titration. For example, tartrate is added to a lead(II) ion solution buffered at pH 10 to prevent lead(II) hydroxide from precipitating, ensuring accurate titration results with standard EDTA.

Question 3

How does back-titration work when metal ions block EDTA indicators?

Accepted Answer

Back-titration adds a known excess of EDTA solution to the metal ion, then buffers the solution to the desired pH. The remaining EDTA is then back-titrated with a standard solution of a second metal ion, such as zinc, using a visual indicator to reach the endpoint. This method works when direct titration fails due to slow reactions or indicator interference.

Question 4

Why is displacement titration used for calcium ions instead of direct titration?

Accepted Answer

Displacement titration is used when metal ions do not react adequately with the indicator. Since solochrome black is a poor indicator for directly titrating calcium ions, an excess magnesium–EDTA solution is used instead. Calcium ions displace magnesium to form a more stable complex, and the released magnesium is then titrated with standard EDTA to determine the endpoint.

Question 5

What role does pH play in optimizing EDTA titrations?

Accepted Answer

The optimum pH ensures a large conditional formation constant of the metal-EDTA complex and maintains visibility of the free indicator color in solution. Buffering the metal ion solution to the desired pH before titration with standard EDTA is essential for accurate results and reliable endpoint detection across all titration methods.

Question 6

How do you determine which EDTA titration method to use for a specific metal ion?

Accepted Answer

Choose direct titration if the metal ion reacts quickly and doesn't block indicators. Use back-titration if the metal ion reacts slowly, precipitates, or interferes with indicator visibility. Use displacement titration if the metal ion lacks a suitable indicator. Each method requires buffering to the appropriate pH and using standard EDTA or a second metal ion solution to reach the endpoint.

Question 7

What happens to magnesium ions during displacement titration of calcium?

Accepted Answer

During displacement titration, calcium ions are titrated with excess magnesium–EDTA solution. The calcium ions displace all magnesium ions from the complex to form a more stable calcium–EDTA complex. The free magnesium ions released into solution are equivalent to the original calcium ion concentration and are then titrated with standard EDTA to obtain the endpoint.

EDTA: Doğrudan, Geri ve Yer Değiştirme Titrasyonu

Browse More Videos